Tsvetnye Metally
Aticles, published in the 5-th issue of "Tsvetnye Metally" (Non-ferrous metals) journal (May, 2013) share the subject area of heavy and light non-ferrous metals and rare metals. This issue shares the questions of theory and practice of ore concentration, production and processing of non-ferrous metals, complex usage of crude ores, economics and management of production and industrial automation.
This issue includes the article, which is devoted to Udokan deposit. The large-scale and complex problem of mastering of this deposit includes the special approaches to designing and realization of project. Since the Udokan deposit was opened, there have been cumulated many inconsistent meanings about the project realization ways. Technologies require the further understanding for manufacturing of the most efficient deposit mastering methods.
The section «Beneficiation» includes the article by P. K. Fedotov. This article describes the results of comparison of ore disintegration efficiency by various methods. The F. Bond method was the basis for the definition of indices, which are used for the calculation of industrial ball mill parameters (sizes, capacity) for grinding of ore at concentration plant with optimal (minimal) costs of electric power.
The article by Yu. G. Seredkin and A. P. Lysenko, published in the section «Aluminium, Alumina, Carbon Materials», describes the developed technology of obtaining of fine-dispersed aluminum hydroxide by electrolytic method.
The article by V. I. Bolobov, Ya. M. Shneerson and A. Yu. Lapin describes the results of the carried out analysis of corrosion behavior of samples (including the weld samples) of six grades of foreign alloys of Cr-Ni-Mo and Cr-Ni-Mo-Cu alloying systems and Cr-Ni-Mo-Cu-steel 904L (analogue of Russian steel EI943 (ЭИ943)). The samples were researched in the conditions of high-temperature leaching of pyrite gold-containing concentrates in laboratory autoclave and half-industrial continuous unit, using the gravimetric and metallographic methods.
The article by O. M. Ogorodnikova, D. G. Ryabov and V. S. Radya is published in the section «Automation». This article shows, that computer modeling of thermal regime of mould with crystallization of crude copper ingots is an efficient instrument of improvement of technological processes. Computer Aided Engineering (CAE) was applied for the cast moulds, used at Sredneuralsky Copper Smelter.
You may find below more details about the issue or book printed or electronic version of the journal.
| ECONOMICS AND MANAGEMENT OF PRODUCTION | |
| ArticleName | International review of market of non-ferrous metals |
| ArticleAuthor | Korneev S. I. |
| ArticleAuthorData | Korneev S. I., e-mail: int4479237@yandex.ru |
| ArticleName | Active development of Ni – Pt deposits — condition of sustainable development of Voronezh oblast |
| ArticleAuthor | Chalov V. I. |
| ArticleAuthorData | National University of Science and Technology “MISiS”, Moscow, Russia V. I. Chalov, Professor, e-mail: chalov_vi@mail.ru |
| BENEFICIATION | |
| ArticleName | Theory of creation of innovation flotation technologies. Part IV. Theory of increasing of selectivity of the collectors operation during the process of flotation |
| ArticleAuthor | Abramov A. A. |
| ArticleAuthorData | Moscow State Mining University, Moscow, Russia A. A. Abramov, Professor, e-mail: AbramovAA31@mail.ru |
| ArticleName | Comparison of ore disintegration efficiency in the layer of particles, using the traditional apparatuses |
| ArticleAuthor | Fedotov P. K. |
| ArticleAuthorData | National Research Irkutsk State Technical University, Chair of Minerals Concentration and Engineering Ecology, Irkutsk, Russia P. K. Fedotov, Assistant Professor of a Chair of Minerals Concentration and Engineering Ecology, e-mail: fedotovpavel@yandex.ru |
| HEAVY NON-FERROUS METALS | |
| ArticleName | Sorption extraction of heavy metal ions by carbon sorbents in dynamic conditions |
| ArticleAuthors | Domracheva V. A., Shiyrav G. |
| ArticleAuthorsData | Irkutsk State Technical University, Irkutsk, Russia V. A. Domracheva, Professor of a Chair of Minerals Concentration and Engineering Ecology, e-mail: domra@istu.edu |
| NOBLE METALS AND ALLOYS | |
| ArticleName | Development of pyrometallurgical method of slagging of non-ferrous metals, during the process of smelting of low-grade scrap |
| ArticleAuthors | Strizhko L. S., Kotykhov M. I., Shchelkunov V. V., Rogov S. I., Stolyarova I. Yu. |
| ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia L. S. Strizhko, Professor of a Chair of Non-ferrous Metals and Gold, e-mail: sls_2007.47@mail.ru I. Yu. Stolyarova, Candidate for a Master's Degree
“Scientific and Experimental Center “DIEM 21” JSC, Moscow, Russia V. V. Shchelkunov, Chief Executive Officer
“Shchelkovo Plant of Secondary Precious Metals” JSC, Moscow, Russia S. I. Rogov, Chief Executive Officer for Economics |
| ArticleName | Extraction of gold from the gold-extraction plant tailings, formed as a result of processing of mixed refractory ores |
| ArticleAuthors | Gurin K. K., Bashlykova T. V., Ananev P. P., Boboev I. R., Gorbunov E. P. |
| ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia K. K. Gurin, Post-graduate Student of a Chair of Non-ferrous Metals and Gold I. R. Boboev, Post-graduate Student of a Chair of Non-ferrous Metals and Gold
Scientific and Education Center “Innovation Mining Technologies”, Moscow, Russia T. V. Bashlykova, Head of Laboratory of Technological Expertise and Creation of Scientific and Methodical Base of Sertification of Mineral Raw Materials P. P. Ananev, Chief Executive Officer |
| ALUMINIUM, ALUMINA, CARBON MATERIALS | |
| ArticleName | Development of obtaining technology of fine aluminium hydroxide generation by electrolytic method |
| ArticleAuthors | Seredkin Yu. G., Lysenko A. P. |
| ArticleAuthorsData | "Scientific-research and Project Institute “TOMS” LLC, Irkutsk, Russia Yu. G. Seredkin, Researcher
National University of Science and Technology “MISiS”, Moscow, Russia A. P. Lysenko, Assistant Professor of a Chair of Non-ferrous Metals and Gold |
| MAGNESIUM, TITANIUM, RARE METALS, SEMICONDUCTORS | |
| ArticleName | Research of separation of gas from various types of raw materials during the process of hafnium iodide refining |
| ArticleAuthors | Aleksandrov A. V., Kotsar M. L., Ilenko E. V., Kochubeeva S. L. |
| ArticleAuthorsData | “Chepetsky Mechanical Plant” JSC, Glazov, Russia A. V. Aleksandrov, Head of a Group of Central Scientific and Research Laboratory, e-mail: post@chmz.net E. V. Ilyenko, Head of Central Scientific and Research Laboratory
“Leading Scientific-Research Institute of Chemical Technology” JSC, Moscow, Russia M. L. Kotsar, Head of Laboratory S. L. Kochubeeva, Scientific Secretary |
| METAL PROCESSING | |
| ArticleName | Influence of the main alloyng elements, microadditives and impurities on the properties of forging alloys of Al – Zn – Mg – Cu system |
| ArticleAuthors | Vakhromov R. O., Tkachenko E. A., Popova O. I. |
| ArticleAuthorsData | All-Russian Scientific Research Institute of Aviation Materials, State Research Center of the Russian Federation, Moscow, Russia R. O. Vakhromov, Head of Laboratory, e-mail: admin@viam.ru |
| ArticleName | Research of microstructure and mechanical properties of experimental antifriction alloys (for monometallic sleeve bearings) |
| ArticleAuthors | Kotova E. G., +Kurbatkin I. I. , Mironov A. E., Gershman I. S. |
| ArticleAuthorsData | “Railway Research Institute” JSC, Moscow, Russia E. G. Kotova, Post-graduate Student, e-mail: kotova@vniizht.ru |
| ArticleName | Corrosion resistance of nickel-chromium alloys, during the process of high temperature leaching of gold-bearing sulphide raw materials |
| ArticleAuthors | Bolobov V. I., Shneerson Ya. M., Lapin A. Yu. |
| ArticleAuthorsData | National Mineral Resources University, Saint Petersburg, Russia V. I. Bolobov, Professor of a Chair of Mechanical Engineering, e-mail: Boloboff@mail.ru
“Scientific and Research Center “Gidrometallurgiya” LLC, Saint Petersburg, Russia Ya. M. Shneerson, Chief Executive Officer, Professor |
| AUTOMATION | |
| ArticleName | Dynamics of composition of waste sulphur dioxide of Vaniukov furnaces |
| ArticleAuthors | Zotikov O. V., Vasilev Yu. V., Vlasov V. A., Platonov O. I., Tsemekhman L. Sh. |
| ArticleAuthorsData | “Institute “Norilskproekt” LLC, Norilsk, Russia O. V. Zotikov, Chief Executive Officer, phone: +7 (3919) 42-82-02
Laboratory of Pyrometallurgy, “Institute “Gipronickel” LLC, Saint Petersburg, Russia Yu. V. Vasilev, Leading Researcher |
| ArticleName | Batch system of the charge components for electrode production |
| ArticleAuthors | Soshkin S. V., Kokov M. S., Soshkin G. S., Khadzaragova E. A. |
| ArticleAuthorsData | Scientific and Industrial Complex “YugTsvetmetavtomatika”, Vladikavkaz, Russia S. V. Soshkin, Deputy Chief Executive Officer, e-mail: ugcma@mail.ru
Chair of Theory and Automation of Metallurgical Processes and Furnaces, North-Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Russia E. A. Khadzaragova, Professor |
| ArticleName | Computer simulation of thermal conditions of mould during the process of crystallization of black copper ingots |
| ArticleAuthors | Ogorodnikova O. M., Ryabov D. G., Radya V. S. |
| ArticleAuthorsData | Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia O. M. Ogorodnikova, Assistant Professor of a Chair “Electronic Engineering”, Head of Technological Center of Computer Engineering, e-mail: O.M.Ogorodnikova@bk.ru
Laboratoty of Foundry, “Ural Institute of Metals” JSC, Ekaterinburg, Russia D. G. Ryabov, Researcher |
