Журналы →  CIS Iron and Steel Review →  2018 →  №2

CIS Iron and Steel Review



Hydrometallurgy
Название Design of a hydrometallurgical complex for processing of complex low-grade manganese ores
Авторы D. Yu. Zhukov, Yu. M. Averina, V. V. Menshikov
Информация об авторах

D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia):

D. Yu. Zhukov, Dr. Eng., Adviser to the Rector,
Yu. M. Averina, Dr. Eng., Associate Professor, Dept. of Innovative Materials and Corrosion Protection, e-mail: averinajm@mail.ru
V. V. Menshikov, Dr. Eng., Professor, Dept. of Innovative Materials and Corrosion Protection

Ironmaking
Название Blast furnace performance improved through optimal radial distribution of materials at the top while changing the charging pattern
Авторы S. K. Sibagatullin, A. S. Kharchenko, G. Yu. Savchenko, V. A. Beginyuk
Информация об авторах

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies
A. S. Kharchenko, Cand. Eng., Assocoate Prof., Head of Dept. of Metallurgy and Chemical Technologies
G. Yu. Savchenko, Post-graduate, Dept. of Metallurgy and Chemical Technologies

 

Magnitogorsk Iron and Steel Works PJSC (MMK) (Magnitogorsk, Russia):

V. A. Beginyuk, Head Specialist of the Technological Group, Blast Furnace Shop

Steelmaking
Название Iron oxidation state analysis in oxide-fluoride slags
Авторы L. Ya. Levkov, D. A. Pankratov
Информация об авторах

JSC «RPA «CNIITMASH» (Moscow, Russia):

L. Ya. Levkov, Dr. Eng., Head of the Special Electrometallurgy Laboratory, e-mail: LYaLevkov@cniitmash.com, 6758745@mail.ru

 

Lomonosov Moscow State University (Moscow, Russia):
D. А. Pankratov, Cand. Chem., Leading Scientific Researcher, Chemical Dept., e-mail: pankratov@radio.chem.msu.ru

Rolling and Metal Forming
Название Further developments in simulation of metal forming processes
Авторы M. I. Rumyantsev, O. N. Tulupov
Информация об авторах

Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):

M. I. Rumyantsev, Cand. Eng., Prof., Dept. of Material Processing, e-mail: mikhail.rumyantsev54@bk.ru
O. N. Tulupov, Dr. Eng., Prof., Vice Rector for Research and Innovation, e-mail: o.tulupov@mail.ru

Название Study the influence of anisotropy of the drawing cylindrical part
Авторы V. A. Demin, S. N. Larin, R. V. Riskin, A. A. Rizkova
Информация об авторах

Bauman State Technical University (Moscow, Russia):

V. A. Demin, Dr. Eng., Prof., e-mail: va_demin@bk.ru

A. A. Rizkova, Post-graduate, Mechanical Engineer, MT6 Department

 

Tula State University (Tula, Russia):
S. N. Larin, Dr. Eng., Prof., Deputy Director on Research and Development, Polytechnic Institute, e-mail: mpf-tula@rambler.ru

 

3 Technical University of Munich (Munich, Germany):
R. V. Riskin, Master student

Carbon Materials
Название Graphite as a prospective material for metallurgical application
Авторы V. N. Amelchenko, I. E. Illarionov, T. R. Gilmanshina, V. A. Borisyuk
Информация об авторах

“Krasnoyarskgrafit” JSC (Krasnoyarsk, Russia):

V. N. Amelchenko, General Director, e-mail: krsgrafit@yandex.ru

 

Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru

 

“Siberian Federal University (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
V. A. Borisyuk, Post-Graduate, e-mail: kiro.30stm@mail.ru

Metal Science and Metallography
Название Assessment and interpretation of nonmetallic inclusions in steel
Авторы A. A. Kazakov, A. I. Zhitenev
Информация об авторах

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
A. I. Zhitenev, Engineer

Название Evolution of cementite in pearlite carbon steel wire at combined deformational processing
Авторы M. A. Polyakova, K. Narasimhan, M. J. N. V. Prasad, Yu. Yu. Efimova
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Material Processing, e-mail: yu.efimova@magtu.ru

 

Indian Institute of Technology Bombay (Mumbai, India):

K. Narasimhan, Dr. Eng. Department of Metallurgical Engineering and Materials Science, e-mail: nara@iitb.ac.in
M. J. N. V. Prasad, Dr. Eng. Department of Metallurgical Engineering and Materials Science

Название Understanding the effect of deoxidation regime on the formation and arrangement of sulphide inclusions and on mechanical properties in steel
Авторы S. B. Gamanyuk, N. A. Zyuban, D. V. Rutskii, G. V. Babin
Информация об авторах

Volgograd State Technical University (Volgograd, Russia):

S. B. Gamanyuk, Cand. Eng., Associate Professor, e-mail: gamanuk@mail.ru
N. A. Zyuban, Dr. Eng., Professor, Head of the Chair “Technology of Materials”, e-mail: tecmat@vstu.ru
D. V. Rutskii, Cand. Eng., Associate Professor, e-mail: tecmat@vstu.ru
G. V. Babin, Post-Graduate

Название Assessment of central heterogeneity in slab to forecast centerline segregation in plate steel
Авторы A. A. Kazakov, E. I. Kazakova, A. Kur
Информация об авторах

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
E. I. Kazakova, Leading Engineer
A. A. Kur, Cand. Eng.

Название The study of the effect of chromium boron (CrB2) hardening additive on the developed PG-Zh40 surfacing powder
Авторы V. G. Mironov, G. T. Shilov, Zh. B. Ilmaliyev, A. A. Bekisheva
Информация об авторах

Kazakh British Technical University, «KBTU METALLUM» LLP (Almaty, Kazakhstan):

V. G. Mironov, Cand. Eng., Head of the Project “TOO KBTU SPLAV”,
G. T. Shilov, Senior Researcher, Mechanical Engineer
A. A. Bekisheva, Doctoral Candidate, e-mail: ardabekovna@mail.ru

 

JSC «Institute of Metallurgy and Ore Beneficiation» (Almaty, Kazakhstan):

Zh. B. Ilmaliyev, Head of the Staff

 

I. K. Beysembetov (Satbayev University, Kazakhstan) and B. K. Kenzhaliev (Institute of Metallurgy and Ore Beneficiation) were also the participants in this work.

Coating
Название Protective coatings produced by electro-spark deposition with TiCNiCr–(Eu2O3) electrodes
Авторы F. V. Kiryukhantsev-Korneev, A. D. Sytchenko, A. E. Kudryashov, E. A. Levashov
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):

Ph. V. Kiryukhantsev-Korneev, Cand. Eng., Associate Prof., Department of Powder Metallurgy and Functional Coatings; Leading Researcher, Scientific and Educational Center SHS MISiS-ISMAN, e-mail: kiruhancev-korneev@yandex.ru
A. D. Sytchenko, Laboratory Assistant, Scientific and Educational Center SHS MISiS-ISMAN
A. E. Kudryashov, Cand. Eng., Leading Researcher, Scientific and Training Center SHS MISiS-ISMAN
E. A. Levashov, Dr. Eng., Prof., Head of the Department of Powder Metallurgy and Functional Coatings; Director, Scientific and Educational Center SHS MISiS-ISMAN

Casting and Foundry
Название Understanding the effect of structural defects in graphite on the properties of foundry coatings
Авторы I. E. Illarionov, T. R. Gilmanshina, A. A. Kovaleva, N. A. Bratukhina
Информация об авторах

Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru

 

Siberian Federal University (Krasnoyarsk, Russia):

T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Professor
N. A. Bratukhina, Associate Professor

Metal Working and Engineering Technologies
Название How production regimes can impact the quality of GAZELLE NEXT ball joints
Авторы I. A. Mikhailovsky, I. Yu. Mezin, D. A. Pesterev
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

I. Yu. Mezin, Dr. Eng., Prof., Head the Chair of Automobile Technology, Certification and Service
I. A. Mikhailovsky, Dr. Eng., Prof., the Chair of Automobile Technology, Certification and Service


“BelMag” Scientific and Production Corporation (Magnitogorsk, Russia):

D. A. Pesterev, Leading Product Design Engineer, Design Engineering Dept., e-mail: pesterev@belmag.ru

Testing of Materials
Название Control and experimental data processing in torsion testing with variable acceleration
Авторы M. V. Erpalov, D. A. Pavlov
Информация об авторах

Ural Federal University (Ekaterinburg, Russia):

M. V. Erpalov, Cand. Eng., Assocoate Prof., Chair “Metal Forming”, e-mail: m.v.erpalov@urfu.ru
D. A. Pavlov, Cand. Eng., Associate Prof., Chair “Metal Forming”, e-mail: d.a.pavlov@urfu.ru

Журналы →  CIS Iron and Steel Review →  2018 →  №2