Journals →  Chernye Metally →  2020 →  #12

Chernye Metally



In the December issue we can highlight the section Foundry dedicated to the 70th anniversary of the chair for Metallurgical Technologies and Equipment of Nizhny Novgorod State Technical University n.a. R. E. Alekseev. Readers will get acquainted with the history of formation and development of the Nizhny Novgorod scientific and pedagogical school of metallurgists, will learn about the key topics of scientific work of the chair in recent years.


The Rolling and other processes for metal forming section is devoted to the 90th anniversary of the chair for Technologies for metal forming of Bauman MSTU. A historical essay on the development and achievements of the scientific school of the chair is presented. The school's contribution to the training of engineering personnel, to the study of technological processes and equipment of forging and stamping production is noted. The methodology of quality management of metal products with elements of robust design is offered: researches allowed to establish the optimum technological mode giving the best value of a quality indicator with simultaneous minimization of production losses. Also one of the topics of the section was an experimental study of the contour error of the high boxes with relatively large radii of angular roundings obtained by drawing from sheet welded multi-thickness blanks of high-strength steel, relevant, in particular, for the automotive industry. The economic effect from the implementation of the presented study results involves savings of up to 10% of the material of the box part with a given position of the weld and the specified thicknesses of material.


The material under the heading "In memory of a comrade" dedicated to A. G. Lunev completes the issue.

 

Please find more details below, or order your printed or electronic version of the Journal.


Iron and steelmaking
ArticleName Optimization of the composition and structure of wear-resistant white cast irons used in the mining industry
ArticleAuthors A. A. Zhumaev, Yu. N. Mansurov, D. D. Mamatkulov, G. D. Ulugov
ArticleAuthorsData

Navoi branch of the Academy of Sciences of Uzbekistan (Navoi, Uzbekistan):

A. A. Zhumaev, Postgraduate Student, E-mail: ahmadjon_jumayev@mail.ru

 

Institute of General and Inorganic Chemistry of the Academy of Sciences of Uzbekistan (Tashkent, Uzbekistan):
Yu. N. Mansurov, Dr. Eng., Director, Prof. of the Tashkent State Transport University, E-mail: yulbarsmans@gmail.com

 

Samarkand State Institute of Architecture and Civil Engineering (Samarkand, Uzbekistan):
D. D. Mamatkulov, Dr. Eng., Prof.

 

Navoi Machine-Building Plant (Navoi, Uzbekistan):
G. D. Ulugov, Head of the Central Plant Laboratory

ArticleName Improving the efficiency of electric arc furnaces through improved control algorithms for electrical modes
ArticleAuthors A. A. Nikolaev, G. P. Kornilov, P. G. Tulupov, G. V. Nikiforov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. A. Nikolaev, Cand. Eng., Associate Prof., Head of the Dept. of Automated Electric Drive and Mechatronics, E-mail: aa.nikolaev@magtu.ru
G. P. Kornilov, Dr. Eng., Prof., Head of Dept. of Power Supply of Industrial Enterprises, E-mail: korn.mgn@mail.ru
P. G. Tulupov, Postgraduate student, Dept. of Automated Electric Drive and Mechatronics, E-mail: tulupov.pg@mail.ru
G. V. Nikiforov, Dr. Eng., Prof., Dept. of Power Supply of Industrial Enterprises

Casting and Foundry Production
ArticleName Possibilities of using car enamel waste in the production of iron casting
ArticleAuthors I. O. Leushin, V. S. Makarov, L. I. Leushina, M. A. Geiko
ArticleAuthorsData

Nizhny Novgorod State Technical University (Nizhny Novgorod Russia):

I. O. Leushin, Dr. Eng., Prof., Head of Dept. of Metallurgical Technologies and Equipment, E-mail: igoleu@yandex.ru
V. S. Makarov, Dr. Eng., Associate Prof., Dept of Construction and Road Machines, E-mail: makvl2010@gmail.com
L. I. Leushina, Candi. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, E-mail: kafmto@mail.ru
M. A. Geiko, Senior Lecturer, Dept. of Metallurgical Technologies and Equipment, E-mail: mices@bk.ru

Rolling and Other Metal Forming Processes
ArticleName Assessment of the actual shape of the hot-rolled strip cross-section contour. Part 2. Profile Classifier
ArticleAuthors S. M. Belskiy, V. A. Pimenov, A. N. Shkarin
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

S. M. Belskiy, Dr. Eng., Prof., E-mail: Belsky-55@yandex.ru
A. N. Shkarin, Post-graduate Student

 

Novolipetsk Steel – NLMK (Lipetsk, Russia):
V. A. Pimenov, Cand. Eng., Senior Researcher, Chief Specialist

ArticleName Methodology for managing quality indicators of hardware products with elements of robust design
ArticleAuthors K. G. Pivovarova, A. G. Korchunov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

K. G. Pivovarova, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, E-mail: k.pivovarova@magtu.ru
A. G. Korchunov, Dr. Eng., Prof., Head of Dept. of Design and Operation of Metallurgical Machines and Equipment, E-mail: international@magtu.ru

ArticleName Effect of modes of patenting carbon wire on its properties
ArticleAuthors I. Yu. Mezin, A. S. Limarev, V. M. Salganik, I. G. Gun
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

I. Yu. Mezin, Dr. Eng., Prof., Head of Dept. of Technologies, Certification and Service of Cars, E-mail: meziniy1@mail.ru
A. S. Limarev, Cand. Eng., Associate Prof., Dept. of Technologies, Certification and Service of Cars, E-mail: aslimarev@mail.ru
V. M Salganik, Dr. Eng., Prof., Dept. of Materials Processing Technologies
I. G. Gun, Dr. Eng., Prof., Dept. of Materials Processing Technologies

ArticleName Experimental study of the error in the height of the contour of box-shaped parts, obtained by drawing from welded blanks of different thickness
ArticleAuthors A. N. Malyshev, S. A. Bysov, A. G. Orlik, Yu. V. Bessmertnaya
ArticleAuthorsData

Kaluga branch of the Bauman Moscow State Technical University (Kaluga, Russia):

A. N. Malyshev, Cand. Eng., Associate Prof., Dept. M1-KF of Engineering technologies
S. A. Bysov, Cand. Eng., Associate Prof., Dept. M1-KF of Engineering technologies
A. G. Orlik, Cand. Eng., Associate Prof., Dept. M5-KF of Materials Science and Chemistry

 

Tula State University (Tula, Ruissia):
Yu. V. Bessmertnaya, Cand. Eng., Associate Prof., Dept. of Mechanics of Plastic Shaping, E-mail: bessmertny@rambler.ru

Metal science and metallography
ArticleName Reasons for banding formation in steels of K60 strength category
ArticleAuthors A. N. Zavalishchin, O. N. Tulupov, M. I. Rumyantsev, E. V. Kozhevnikova
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. N. Zavalishchin, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science, E-mail: zaval1313@mail.ru
O. N. Tulupov, Dr. Eng., Prof., Vice-Rector for Scientific and Innovative Work, E-mail: o.tulupov@mail.ru
M. I. Rumyantsev, Dr. Eng., Prof., Dept. of Materials Processing Technologies, E-mail: mikhail.rumyantsev54@bk.ru

 

Ausferr Research and Technology Center (Magnitogorsk, Russia):
E. V. Kozhevnikova, Company Engineer, E-mail: ausferr_elena@bk.ru


A. E. Volosenko, Mag. Eng., Dept. of Casting Processes and Materials Science, Nosov Magnitogorsk State Technical University, participated in this research.

ArticleName Effect of the initial austenitization temperature on the structural microheterogeneity during drawing of carbon steel with a pearlite structure
ArticleAuthors N. V. Koptseva, Yu.Yu. Efimova, M. A. Polyakova, A. E. Gulin
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

N. V. Koptseva, Dr. Eng., Prof., Dept. of Foundry Processes and Materials Science, E-mail: kopceva1948@mail.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, E-mail: jefimova78@mail.ru
M. A. Polyakova, Dr. Eng., Prof., Dept. of Materials Processing Technologies, E-mail: m.polyakova-64@mail.ru
A. E. Gulin, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, E-mail: a.gulin@magtu.ru

ArticleName Influence of dispersed particles of tungsten carbide on the microstructure of 12Kh18N10T steel obtained by centrifugal casting
ArticleAuthors I. V. Chumanov, A. N. Anikeev, D. A. Zherebtsov
ArticleAuthorsData

South Ural State University (Chelyabinsk, Russia):

I. V. Chumanov, Dr. Eng., Prof., E-mail: chumanoviv@susu.ru
A. N. Anikeev, Cand. Eng., Associate Prof.
D. A. Zherebtsov, Cand. Chem., Senior Researcher

Journals →  Chernye Metally →  2020 →  #12