Журналы →  Tsvetnye Metally →  2012 →  №9 →  Назад

METAL PROCESSING
Название Casting molds coverings with nanopowders for bronze molding
Автор Martyushev N. V.
Информация об авторе

Tomsk Polytechnic University, Tomsk, Russia:

N. V. Martyushev, Assistant Professor, e-mail: martjushev@tpu.ru

Реферат

Data about application nano-powder in a structure of coatings of the form are in-process shown at a casting bronzes with lead. Influence of a structure of used protective-separating coating of a foundry core on a microstructure of castings was investigated. For experimental work following coverings [1] — a mix dioxide zirconium nanopowder with industrial oil, and the same structure, but already on a basis on oxide aluminum nanopowder have been chosen. As an investigated material marks of bronze with tin, zinc, nickel have been chosen. By means of the techniques developed by authors curve coolings with application of coverings of various structure have been constructed. Cooling plotting was conducted by means of the developed device a thermograph. Work results have shown that the greatest decrease in speed of cooling at the moment of bronze crystallization gives a covering of a casting mold on the basis of a zirconium dioxide powder (45 оC/c). The covering on a basis aluminum oxide gives smaller effect, speed goes down to 65 оC/c. Decrease in cooling speed of casts coverings allows to change the form and the sizes of lead inclusions and level casting structure on section. Lead inclusions become more spherical form, and their interphase surface is leveled. The greatest changes occur in cast blankets. In work it is shown that multicomponent bronze decrease in speed of cooling at the expense of use of a plastering results not only in changes in morphology of lead inclusions, but also to change of phase structure. Decrease in speed of cooling leads to quantity increase eutectoid and to hardness growth cast.

Ключевые слова Protectively-dividing coverings, nanopowders, bronze, bronze with lead, a zirconium dioxide, multicomponent bronze
Библиографический список

1. Melnikov A. G., Martyushev N. V., Egorov Yu. P. Zashchitno-razdelitelnoe pokrytie i sposob ego naneseniya (Protective and decorative coating and approach of its covering). Patent RF, No. 2297300. Asserted 14.12.2005. Published 20.04.2007.
2. Kats A. M. Issledovanie raspredeleniya vklyucheniy svintsa v litoy latuni LS 63 (Research of lead shot distribution in the gunmetal LS 63). Tsvetnye Metally — Non-ferrous metals. 1968. No. 5.
3. Mysik R. K. Izvestiya vuzov. Tsvetnaya Metallurgiya — Russian Journal of Non-Ferrous Metals. 1995. No. 2. pp. 35–38.
4. Martyushev N. V., Korchmit A. V. Raspredelenie svintsovykh vklyucheniy v strukture mednykh splavov (Distribution of lead inclusions in the structure of copper alloys). Materialy vserossiyskoy nauchnoy konferentsii molodykh uchenykh : Nauka. Tekhnologii. Innovatsii (Materials of all-Russian Scientific Conference of Young Scientists : Science, Technologies. Innovations). Novosibirsk : Novosibirsk State Technical University, 2006. Part 2. pp. 189–191.
5. Babichev A. P., Babushkina N. A., Bratkovskiy A. M. et al. Fizicheskie velichiny : spravochnik (Physical magnitudes : reference book). Moscow : Energoatomizdat, 1991. 1232 p.

6. Korchmit A. V., Egorov Yu. P. Obrabotka metallov — Metal Processing. 2005. No. 1. pp. 23–25.

Language of full-text русский
Полный текст статьи Получить
Назад