Журналы →  Tsvetnye Metally →  2012 →  №3 →  Назад

TECHNOLOGIES FOR PRODUCTION AND UTILIZATION OF REM
Название Metallothermic manufacturing оf alloys based on rare earth metals with the discharge of the metal into the mold
Автор Buynovskiy A. S., Sofronov V. L., Makaseev A. Yu., Makaseev Yu. N., Rusakov I. Yu.
Информация об авторе

Seversk Technological Institute of National Research Nuclear University MEPhI

A. S. Buynovskiy, Professor of a Chair of Chemistry and Technology of Materials of Modern Energy, e-mail: bas@ssti.ru

V. L. Sofronov, Dean of a Technological Faculty

A. Yu. Makaseev, Assistant Professor, Deputy Director of Institute

Yu. N. Makaseev, Assistant Professor of a Chair of Chemistry and Technology of Materials of Modern Energy

I. Yu. Rusakov, Assistant Professor

Реферат

Objective. To improve fluoride technology and equipment for obtaining magnetic materials based on rare earth metals.

Problems of the research. To determine factors influencing the composition and quality of the ingots of magnetic alloys based on Nd—Fe—B by calciethermic reduction of metal fluorides with the discharge of the metal into the mold.

Research methods. Experimental studies of the process of obtaining magnetic alloys by the calciethermic reduction of metal fluorides with the discharge of the metal into the mold were performed on the laboratory setup designed by the authors, analyses and studies of properties of raw materials and products were obtained with application of modern physical and chemical methods: the spectral-emission, atomic absorption, X-ray , microstructure, gas chromatography, and others.

Results. There has been proposed a method and apparatus for getting alloys Nd—Fe—B-alloying elements, combining two operations: the reduction and metal casting into molds in one machine. The results of studies of the process for obtaining alloys based on Nd—Fe—B with various concentrations of neodymium and there have been established the factors affecting the yield of metal into the ingot and its quality.

Conclusions. There have been studied the ways to obtain magnetic alloys based on Nd—Fe—B in the device combining two operations: reduction and pouring metal into molds. In this case, due to rapid and directional solidification of magnetic alloys we obtain fine-grained structure, and output of the main magnetic phase of Nd2Fe14B is in the range of 85–92%.

Ключевые слова Fluoride technology, rare-earth metals, neodymium, ferrum, borium, metallic reduction, casting, mould box
Библиографический список

1. Buynovskiy A. S., Sofronov V. L., Shtefan Yu. P. et al. Zhurnal prikladnoy khimii – Russian Journal of Applied Chemistry. 1995. Vol. 68, Is. 5/6. pp. 715–721.

2. Glebov V. A., Ivanov S. I., Shingarev E. N. Konversiya v mashinostroenii – Conversion in mechanical engineering. 2005. No. 6. pp. 60–62.

3. Melnikov S. A., Savchenko A. G., Verklov M. M. et al. Razrabotka tekhnologii i oborudovaniya dlya vodorodnoy obrabotki magnitotverdykh splavov sistemy (Developing of technology and equipment for the hydrogen processing of magnetically hard alloys of the system). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2005. pp. 33–52.

4. Mikhaylin S. V., Zhitkovskiy V. D., Chubarov E. P. Primenenie postoyannykh magnitov iz magnitoplastov v radioelektronnom priborostroenii (Using the constant magnets from the rubber ferrites in the radio-electronic instrument making). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2007. pp. 191–198.

5. Shatalov V. V., Melnikov S. A., Nikonov V. I. et al. Razrabotka bezopasnoy tekhnologii vodorodnoy obrabotki razlichnykh funktsionalnykh materialov (Developing of the safety technology of the hydrogen processing of various functional materials). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2007. pp. 232–244.

6. Bogatkin A. N., Kudrevatykh N. V., Andreev S. V. et al. Magnitnye svoystva bystrozakalennykh splavov Nd—R—Fe—Co—B i postoyannykh magnitov iz nikh (Magnetic properties of the rapidly tempered alloys Nd—R—Fe—Co—B and their constant magnets). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2005. pp. 340–351.

7. Burkhanov G. S., Kolchugina N. B., Burkhanov Yu. S. Vysokochistye redkozemelnye metally — strategicheskiy rezerv dlya sozdaniya novogo pokoleniya materialov funktsionalnogo naznacheniya (High-purity rare earth metals – strategic reserve for creating the new generation of functional purpose materials). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2005. pp. 13–32.

8. Kosynkin V. D., Selivanovskiy A. K., Fedulova T. T. Mineralnoe syre – Mineral raw materials. 2000. No. 2. p. 102.

9. Patent 2113520 RF. Apparat dlya metallotermicheskogo polucheniya redkikh i redkozemelnykh splavov na ikh osnove (Apparatus for metallothermic obtaining of rare and rare earth alloys, on their basis). Buynovskiy A. S., Sofronov V. L., Buynovskiy P. A. et al. Asserted 22.05.1997. Published 20.06.1998. Bulletin No. 12.

10. Biryukov S. I., Metelkin Yu. A., Orlov V. K., Teplinskaya V. M. Plavka i lite urana i ego splavov (Fusion and casting of uranium and it`s alloys). Moscow, :VNIINM, 1980. 88 p.

11. Milyaev O. A., Kudrevatykh N. V., Tarasov E. N. et al. Rol etapov tekhnologicheskoy tsepochki v formirovanii magnitnykh svoystv postoyannykh magnitov iz splavov Nd—Fe—B (Role of the processing chain stages in formation of the constant magnets` magnetic properties from the alloys Nd—Fe—B). Gornyy informatsionno-analiticheskiy byulleten – Mining informational and analytical bulletin. 2005. pp. 352–361.

Language of full-text русский
Полный текст статьи Получить
Назад