MINING PRACTICE, MINERALOGY | |
Название | Solving of problems related to transfer from open-cut to underground mining of deposits as exemplified in the development of Zhdanovsky deposit’ under-pit copper-nickel ore reserves by sublevel caving and ore’ end discharge |
Автор | Vilchinskiy V. B., Savchikov L. V., Torgov A. I., Amosov I. V., Makeev V. I. |
Информация об авторе | Gipronickel Institute Ltd V. B. Vilchinskiy, Head of Mining Laboratory, e-mail: vbvil@niсkel.spb.ru
Kola MMC |
Реферат | The principal design and process problems related to the transfer from open-cut to underground mining of Zhdanovsky Deposit’ copper-nickel ore have been highlighted. Measures required to be taken at the under-pit reserves mining by the method of sub-level caving and ore’ end discharge (SLCED). It has been found out that SLCED method implementation in full scope requires substantial expansion of the advanced mine preparation work to create adequate extraction front (no less than 3–4 sublevels). Based on the Mine’ operation experience, extraction of relatively poor ore using caving units is impossible without optimising indices of ore extraction from the areas that are directly dependent on the completeness of the broken-off ore removal from the blocks. At high ore value, it would be reasonable to decrease losses at the expense of higher dilution. However, at low ore value dilution rate should be decreased, and losses should be increased. |
Ключевые слова | Underworked disseminated ore, filling mass, rocks displacement, outcrops stability, room mining, poor ore. |
Language of full-text | русский |
Полный текст статьи | Получить |