• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Chernye Metally →  2009 →  №7 →  Назад

Название Improved metallurgical processes through modern simulation technique
Автор H.-J. Odenthal, C.-H. Rehroth, M. Sommerfeld, A. Ludwig, E. Baake, A. Thess.
Информация об авторе H.-J. Odenthal, e-mail: juergen.odenthal@sms-demag.com.
Реферат The VDEh working group "Fluid Mechanics and Flow Simulation" is concerned with the application of Computational Fluid Dynamics (CFD) in the field of metallurgical process engineering. The methods used are analyzed, current flow related problems in steelworks are discussed, and the exchange of information between the group members is encouraged. In this paper some of the topics the group recently worked on are presented.
Ключевые слова metallurgical processes, flow simulation, fluid dynamics, computa&tional engineering.
Библиографический список 1. Odenthal, H.-J.; Javurek, M.; Kirschen, M.: CFD benchmark for a single strand tundish (Part I), steel res. intern. 80 (2009) Nr. 2 (geplant).
2. Ferziger, J. H.; Peric, M.: Computational Methods for Fluid Dynamics, 2. Aufl. Springer Verlag, 1999.
3. Launder, В. E.: Intern. J. for Numerical Methods in Fluids 9 (1989), S. 963/85.
4. Launder, В. E.; Spalding, D. В.: Lectures in mathematical models of turbulence, Academic Press, London, Groβbritannien, 1972.
5. Craft, T. J.; Gant, S. E.; Gerasimov, A. V.; lacovides, H.; Launder, В. E.: Fluid Dynamics Res. 38 (2006) Nr. 2–3, S. 127/44.
6. Fluent 12.0 User's Guide, 2008.
7. Sagaut, P.: Large Eddy Simulation for incompressible flows, an introduction, 2. Aufl., Springer Verlag, 1998.
8. Menter, F.; Egorov, Y.: Turbulence modeling of aerodynamic flow, Proc. Intern. Aerospace CFD Conf., 18.–19. Juni 2007, Paris, Frankreich, S. 1/17.
9. Arien, В.: 2003 aSCHLIM Final Report EU 5 FP Project FISS-2001-2001.
10. Smolentsev, S.; Abdou, M.: Development and adjustment of "k-ε" turbulence model for MHD channel flows with large aspect ratio in a transverse magnetic field, Proc. 4. Intern. Conf. MHD at dawn of third Millennium, 18.–22. Sept. 2000, Gience, Frankreich.
11. Bröder, D.; Sommerfeld, M.: Measurement Sc. Techn. 18 (2007), S. 2 513/28.
12. Göz, M. F.; Bunner, В.; Sommerfeld, M.; Tryggvason, G.: Simulation of bidisperse bubbly gas-liguid flows by a parallel finite-difference/front-tracking method, [in:] Krause, E.; Jäger, W. [Hrsg.], High Performance Computing in Science and Engineering, Springer Verlag, 2002, S. 298/308.
13. Lain, S.; Sommerfeld, M.: Powder Techn. 184 (2008), S. 76/88.
14. Bourloutski, E.; Sommerfeld, M.: Transient RANS/Lagrange calculations of two- and three-phase flows in bubble columns, [in:] Rodi, W.; Fuero, N. [Hrsg.], Engineering Turbulence Modelling and Measurements 5, Elsevier Science, 2002, S. 969/78.
15. Sommerfeld, M.; Bourloutski, E.; Bröder, D.: Canadian J. Chem. Eng. 81 (2003), S. 508/18.
16. Ludwig, A.; Wu, M.: Metall. Mater. Trans. 33A (2002), S. 3 673.
17. Wu, M.; Ludwig, A.: Adv. Eng. Mater. 5 (2003), S. 62.
18. Ludwig, A.; Gruber2Pretzler, M.; Mayer, F.; Ishmurzin, A.; Wu, M.: Mat. Sci. Eng. A, 413–414 (2005), S. 485/89.
19. Ludwig, A.; Gruber-Pretzler, M.; Wu, M.; Kuhn, A.; Riedle, J.: Int. J. Fluid Dynamic Materials Proc. 1 (2006), S. 285/300.
20. Wu, M.; Ludwig, A.: Metall. Mater. Trans. A, 38 (2007), S. 1 465/75.
21. Wu, M.; Ludwig, A.; Luo, J.: Mater. Sci. Forum 475 (2005), S. 2 725.
22. Wu, M.; Ludwig, A.: Metall. Mater. Trans. A 37 (2006), S. 1 613/31.
23. Umbrashko, A.; Baake, E.; Nacke, В.; Jakovics, A.: Metallurg. Mater. Trans. В 37B (2006) Nr. 5, S. 831/38.
24. Baake, E.; Umbrashko, A.; Jakovics, A.: steel res. intern. 78 (2007) Nr. 5, S. 413/18.
25. Kirpo, M.; Jakovics, A.; Nacke, В.; Baake, E.: Particle transport in recirculated liquid metal flows, Proc. Intern. Sympos. on Heating by Electromagnetic Sources, 19.–22. Juni 2007, Padua, Italien, S. 153/60.
26. Baake, E.; Umbrashko, A.; Behrens, H.; Jakovics, A.: LES-Modeling of turbulent flows, heat and mass transfer in industrial induction applications, Proc. 5. Intern. Sympos. on Electromagnetic Processing of Materials, 23.–27. Okt. 2006, Sendai City, Japan, S. 214/19.
27. Krasnov, D.; Zienicke, E.; Zikanov, O.; Boeck, T.; Thess, A.: J. Fluid Mech. 504 (2004), S. 183/211.
28. Moresco P.; Alboussiere, Т.: J. Fluid Mech. 504 (2004), S. 167/81.
29. Boeck, T.; Krasnov, D.; Zienicke, E.: J. Fluid Mech. 507 (2007), S. 179/88.
30. Thess, A.; Votyakov, E.; Kolesnikov, Y.: Lorentz Force Velocimetry, Phys. Rev. Lett. 96 (2007) 164501.
Language of full-text русский
Полный текст статьи Получить
Назад