Журналы →
Tsvetnye Metally →
2009 →
№12 →
Назад
Назад
| Название | Power parameters of formation of canes from powders of refractory metals |
| Автор | Burkin S. P., Andryukova E. A., Beketov A. R., Obabkov N. V., Brynskikh Ya. A. |
| Информация об авторе | Burkin S. P., e-mail: spb@mtf.ustu.ru |
| Реферат | Not only quality of electrodes, but also yield is important for technology of production of consumable electrodes of vacuum arc melting by the method of powder compacting of refractory metals. Principally new method of pressing of canes with quadraple compression, providing uniform density and deficiency of buckling during the following vacuum sintering is considered. The technique of determination of power parameters of the new process, tested at calculation of force of pressing of powder of alloy ЦМ-2А at original unit for all-round compression is offered. |
| Ключевые слова | Refractory metals, formation, powder, power parameters, compression, electrodes, pressing. |
| Библиографический список | 1. Agte K., Vatsek I., Vol'fram i molibden – L. : Energiya, 1964. 2. Tekhnologiya I oborudovanie dlya obrabotki tugoplavkikh metallov / A. P. Kolikov, P. I. Polukhin, A. V. Kupin at al. - M. : Metallurgiya, 1982. – 328 p. 3. Pat. 3814788 USА. Method and apparatus for the rocking compaction of refractory metal powdery / Livera P. A., Bloomfield N. J. ; publ. 04.06.1974. 4. Pat. 2324595 Russia. MPK V 30 B 11/02. Ustroystvo dlya formirovaniya dlinnomernykh zagotovok iz poroshkovykh materialov / Bukin S. P., Beketov A. R., Loginov Yu. N. at al. ; zayavl. 05.04.2006; opubl. 20.05.2008, Bul. № 14. 5. Burkin S. P., Beketov A. R., Obabkov N. V. at al. // Tr. SverdNIIKhIMMASh : ser. “Obobrudovanie dlyz osnashcheniya tekhnologicheskikh proizvodstv”. - Ekaterinburg, 2007. Iss. 14 (78). P. 232-240. 6. Kiparisov S. S., Libenson G. A. Poroshkovaya metallurgiya – M. : Metallurgiya, 1980. – 496 p. |
| Language of full-text | русский |
| Полный текст статьи | Получить |
