• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Tsvetnye Metally →  2011 →  №6 →  Назад

Heavy non-ferrous metals
Название Behaviors of copper and impurity elements during expulsion copper melt slags with CO–CO2 gas mixture
Автор Komkov A. A., Kamkin R. I.
Информация об авторе A. A. Komkov, Docent of Department of Metallurgy of Non-ferrous, Rare and Noble Metals, e-mail: akomkov@yandex.ru; R. I. Kamkin, Engineer, National University of Science and Technology “MISIS”.
Реферат

The results of experimental work, devoted to reducing bubbling depletion of copper melt slags with CO–CO2 gas mixtures have been presented in this paper. The regularities of copper extraction from slags and features of behavior of zinc, lead and copper impurity elements have been considered. It has been shown that obtained metal alloy has been saturated with iron with reduction of residual copper content in slags. Speed of slag depletion depends on CO–CO2 correlation in delivered gas. The obtained results testify about high degree of lead and zinc sublimation even with low duration of reducing slag processing. Next notable result is high arsenic extraction in metal phase independent of reducing conditions. It’s allow to do the guess about atomic dissolution of arsenic in copper melt slags in reducing conditions.
Ключевые слова Vanyukov furnace, slag depletion, impurity elements, lead, zinc, arsenic, reducing.
Библиографический список

1. Zaytsev V. Ya., Tsesarskiy V. S., Vaskevich A. D. et al. Nauch. trudy MISiS (Scientific papers of National University of Science and Technology “MISIS”). Moscow, 1976. Coll. No. 91. pp. 17-28.

2. Wang S. S., Kurtis A. J., Toguri J. M. Can. Met. Quart. 1973. Vol. 12. pp. 383-389.

3. Ladygo E. A. Zakonomernosti raspredeleniya medi i nikelya mezhdu produktami obednitelnoy plavki v vosstanovitelnykh usloviyakh : dis. kand. tekhn. nauk. (Regularity of copper and nickel distribution between products of depletion melting in reducing conditions: Inauguration dissertation of Candidate of Engineering Sciences). Moscow, 2003. 149 p.

4. Fomichev V. B., Knyazev M. V., Ryumin A. A., Tsemekhman L. Sh.et al. Tsvetnye Metally – Non-ferrous Metals. 2002. No. 9. pp. 32-36.

5. Fedorov A. N., Malevskiy A. A., Indenbaum G. V., Gladyuk E. V. Tsvetnye Metally – Non-ferrous Metals. 1995. No. 11. pp. 7-10.

6. Komkov A. A., Baranova N. V., Bystrov V. P. Tsvetnye Metally – Non-ferrous Metals. 1994. No. 12. pp. 26-30.

7. Yazawa A. Erzmetall. 1980. Vol. 33, No. 7/8. pp. 377-382.

8. Komkov A. A., Bystrov V. P., Ladygo E. A. Tsvetnye Metally – Non-ferrous Metals. 2008. No. 10. pp. 44-49.

9. Sorokin M. L., Andryushechkin N. A., Nikolaev A. G. Izv. vuzov. Tsvetnaya metallurgiya – News of Higher Schools. Nonferrous Metallurgy Transaction. 1996. No. 6. pp. 10-14.

10. Vaskevich A. D., Sorokin M. L., Kaplan V. A. Tsvetnye Metally – Non-ferrous Metals. 1982. No. 10. pp. 22-26.

11. Nagamori M., Mackey P. J., Tarassoff P. Metall. Mater. Trans. B. 1975. No. 6. pp. 295-301.

12. Kocur J. et al. Rutnicke' Listy. 1983. No. 4. pp. 259-263.

13. Kim H. G., Sohn H. Y. Metall. Mater. Trans. B. 1998. No. 29. pp. 583-590.
Language of full-text русский
Полный текст статьи Получить
Назад