Nadezhda Metallurgical Plant named after B. I. Kolesnikov, Polar Division of MMC Norilsk Nickel, Norilsk, Russia

V. V. Muravyov, Director, e-mail: MuravevVV@nornik.ru
V. I. Morgoslep, Head of Smelting Shop No. 1, e-mail: MorgoslepVI@nornik.ru

M. A. Pedanov, Chief Engineer, e-mail: PedanovMA@nornik.ru

MMC Norilsk Nickel Polar Division, Norilsk, Russia
A. D. Borodin, Chief Specialist of the Laboratory of Engineering Support of Production of the Nadezhda Metallurgical Plant, Center for Engineering Support of Production, e-mail: BorodinAD@nornik.ru

The tightening of requirements for reducing the man-made impact of concentrators and metallurgical enterprises by the global community in the context of compliance with ESG criteria, as well as the integrated development of mineral deposits by Russian legislation, necessitates the development of technologically and economically sound methods for processing anthropogenic raw materials and ore reserves characterized by a low content of target metals and the presence of non-specific impurity components. In the Polar Division of MMC Norilsk Nickel, such raw materials are lowsulfide lean ore from the Zapolyarny mine, materials from mine waste dumps stored on the surface, and stored ash and slag obtained earlier during coal gasification for the production of generator gas at the Nickel Plant. Due to the significant content of silicon dioxide in this raw material, methods of its involvement in the pyrometallurgical production of the MMC Norilsk Nickel Polar Division during the processing of sulfide copper-nickel ores and concentrates are considered, in process of which transported from offsite silicon-containing flux, quartzite and river sand, is used for slagging of iron. A technologically sound method of involving the materials in question is the processing for metallurgical slag-cleaning in the electric furnace of the Nadezhda Metallurgical Plant named after B. I. Kolesnikov. The conducted studies (balance calculations and pilot tests) showed the fundamental possibility of using alternative materials in a mixture of siliconcontaining fluxes with partial replacement of the main flux and obtaining conditioned smelting products. The calculation of economic efficiency, performed only on the replacement of the main flux (quartzite) in the processing of waste dump material and low-sulfide ore of the Zapolyarny mine, showed a stable positive effect. When processing ash slag, the effect has borderline values and will be achieved in the future as a result of the liquidation of the waste disposal facility.

1. Krupnov L. V., Midyukov D. O., Malakhov P. V. Ways to cover the raw material demand in the copper-nickel sector. Obogashchenie Rud. 2022. No. 2. pp. 37–41.
2. Krupnov L. V., Midyukov D. O., Datsiev M. S., Ilyin V. B. Change in the mineral resource supplies in production of heavy nonferrous metals in terms of copper and nickel. Gornyi Zhurnal. 2024. No. 3. pp. 10–16.
3. Ryabushkin M. I., Petrov A. F., Lyubeznykh V. A., Brusnichkina-Kirillova L. Yu. Processing of technogenic materials from Talnakh Concentrator at hydrometallurgical production facility of Nadezhda metallur gical plant of PJSC “MMC Norilsk Nickel”. Tsvetnye Metally. 2018. No. 6. pp. 65–71.
4. Arabadzhi Ya. N., Yuryev A. I., Volyanskiy I. V., Tozik V. M. Involvement in processing as a technogenic raw material of dump slags of the Copper Plant of the MMC Norilsk Nickel Polar Division. Proceedings and catalog of participants: based on the materials of the VI International Conference “Metallurgy-IntekhEko-2013” (March 26–27, 2013, Moscow). Moscow : INTEKhEKO, 2013. pp. 133–136.
5. Taskinen P., Jokilaakso A. Reaction sequences in flash smelting and converting furnaces: An in-depth view. Metallurgical and Materials Transactions B. 2021. Vol. 52. pp. 3524–3542. DOI: 10.1007/s11663-021-02283-7
6. Astikainen O., Klemettinen L., Tammela J., Taskinen P. et al. Industrial deportment of minor and trace elements in direct nickel matte smelting. JOM. 2024. Vol. 76. pp. 5445–5458. DOI: 10.1007/s11837-024- 06739-4
7. Pakhomov R. A., Malakhov P. V., Krupnov L. V., Dymov I. M. Improving cobalt extraction through oxidative blowing of copper-nickel matte. 12th International Conference on Molten Slags, Fluxes and Salts (MOLTEN 2024). (Brisbane, Australia, 17–19 June 2024). pp. 1187–1193. DOI: 10.62053/ZFVS9836
8. Krupnov L. V., Malakhov P. V., Ozerov S. S., Pakhomov R. A. Analyzing russian cobalt metallurgy and ways to raise recovery. Tsvetnye Metally. 2023. No. 7. pp. 25–33.
9. Chi X., Liu H., Xia J. Breaking the Fe3O4-wrapped copper microstructure to enhance copper–slag separation. International Journal of Minerals, Metallurgy and Materials. 2024. Vol. 31. pp. 2312–2325. DOI: 10.1007/s12613-024-2861-4
10. Shavripov H. T. Mineralogical and geochemical features of ash slag waste of thermal power plants and its utilization with separation of macro- and microelements. Tashkent : Mukharrir, 2012. 208 p.
11. Yang Y., Liu Y., Zhou S., Li B. Direct-to-blister smelting of copperrich concentrates using SiO2 – FeO – CaO slag system. Materials Transactions. 2024. Vol. 65. pp. 1293–1300. DOI: 10.2320/matertrans.MTD2023014
12. Soloviev L. P., Pronin V. A. Utilization of ash waste from thermal power plants. Fundamentalnye issledovaniya. 2011. No. 3. pp. 40–42.
13. Velichko V. V., Malakhov P. V., Novikova D. D., Nosova O. V. Application of ash slag as a flux for pyrometallurgical production at the MMC Norilsk Nickel Polar Division. Non-ferrous metals and Minerals-2024: abstracts of the 12^th International Congress, Krasnoyarsk, September 9–13, 2024. Krasnoyarsk : Scientific and Innovation Center, 2024. pp. 934–939.
14. Mirzazhonova S. B., Matkarimov S. T., Saidova M. S., Bokhodirova N. K. Technologies for processing mining and metallurgical waste. Tashkent : Tashkent State Technical University named after Islam Karimov, 2023. 134 p.
15. Krupnov L. V., Rumyantsev D. V., Popov V. A., Malakhov P. V., Kaverzin A. V. Technical solutions for improving the operating conditions of Vanyukov furnaces in the processing of technogenic raw materials. Metallurg. 2024. No. 4. pp. 106–111. DOI: 10.52351/00260827_2024_ 4_106
16. Krupnov L. V., Tsymbulov L. B., Malakhov P. V., Ozerov S. S. Operation of autogenous smelters at the Nornickel`s Polar Division when processing raw materials with low energy potential. Tsvetnye Metally. 2022. No. 2. pp. 40–48.
17. Krupnov L. V., Malakhov P. V., Ozerov S. S., Midyukov D. O. Rationale for choosing of technology for processing low-energy raw materials. Metallurgy of non-ferrous, rare and noble metals : proceedings of the XV International Conference named after Corresponding Member of the Russian Academy of Sciences Gennady Leonidovich Pashkov, Krasnoyarsk, September 06–08, 2022. Krasnoyarsk : Scientific and Innovation Center, 2022. pp. 237–242.
18. Maslovskiy A. N., Negrey N. V., Yurev A. I., Smirnov A. N. Involvement of ash slags, formed from the coal combustion at the Kayerkan coal strip mine hardcoal in the secondary processing. Tsvetnye Metally. 2013. No. 6. pp. 31–34.