ArticleName |
Composite polymer-containing
coatings on aluminum alloy AMg3 |
References |
1. Maroofi A., Navab Safa N., G homi H. Atmospheric air plasma jet for improvement of paint adhesion to aluminium surface in industrial applications. Int. J. Adhes. Adhes. 2020. Vol. 98. DOI: 10.1016/j.ijadhadh.2020.102554 2. Gaydukova A. M., Nazarova D. Yu., Konkova T. V., Stoyanova A. D. Determining the influence of parameters of electrochemical polishing of aluminum alloys on roughness and surface reflectivity. Tsvetnye Metally. 2024. No. 8. pp. 40–47. 3. Egorkin V. S., Vyalyi I. E., Izotov N. V., Minaev A. N. et al. Corrosion properties of amg3 aluminum alloy treated by short-pulse plasma electrolytic oxidation in marine conditions. Marine Intellectual Technologies. 2021. No. 4. pp. 117–121. DOI: 10.37220/MIT.2021.54.4.041 4. Kuznetsov A. O., Oglodkov M. S., Klimkina A. A. The influence of chemical composition on structure and properties of Al – Mg – Si alloy. Trudy VIAM. 2018. No. 7. pp. 3–9. 5. Achyuth K., Patel M., Sangral S., Jayaprakash M. Fretting wear degradation behavior of Al – Si – Ni based cast Aluminum alloy under different environment. Mater. Today Proc. 2019. Vol. 15. pp. 103–108. DOI: 10.1016/j.matpr.2019.05.031 6. Yang X., Chen L., Jin X., Du J., Xue W. Influence of temperature on tribological properties of microarc oxidation coating on 7075 aluminium alloy at 25 oC–300 oC. Ceram. Int. 2019. Vol. 45. pp. 12312–12318. DOI: 10.1016/j.ceramint.2019.03.146 7. Egorkin V. S., Medvedev I. M., Sinebryukhov S. L., Vyaliy I. E. et al. Atmospheric and Marine Corrosion of PEO and Composite Coatings Obtained on Al – Cu – Mg Aluminum Alloy. Materials (Basel). 2020. Vol. 13. DOI: 10.3390/ma13122739 8. Sundararajan M., Devarajan M., Jaafar M. Investigation of surface and mechanical properties of anodic aluminium oxide (AAO) developed on Al substrate for an electronic package enclosure. Surf. Coatings Technol. 2020. Vol. 401. DOI: 10.1016/j.surfcoat.2020.126273 9. Díaz B., Figueroa R., Nóvoa X. R., Pérez C. et al. Effect of substrate microstructure on corrosion resistance of cast and forged anodised 6082 Al alloy. Surf. Coatings Technol. 2024. Vol. 481. DOI: 10.1016/j.surfcoat.2024.130614 10. Yang H., Gao Y., Qin W., Li Y. Microstructure and corrosion behavior of electroless Ni – P on sprayed Al – Ce coating of 3003 aluminum alloy. Surf. Coatings Technol. 2015. Vol. 281. pp. 176–183. DOI: 10.1016/j.surfcoat.2015.10.001 11. Zhang T., Zhai H., Li W., Hong H., Li Y. XRD and EBSD evaluation on deposition behavior and microstructure characteristic of HVOF sprayed 304SS coating on aluminum substrate. Surf. Coatings Technol. 2025. Vol. 496. DOI: 10.1016/j.surfcoat.2024.131614 12. Kovaleva M. G., Arseenko M. YU., Tyurin YU. N., Kolisnichenko O. V. Titanium powder coatings on aluminum. Alternative energy and ecology. 2011. No. 6. pp. 15–20. 13. Woo Yang J., Park H., Hwan Chun H., Ceccio S. L. et al. Development and performance at high Reynolds number of a skin-friction reducing marine paint using polymer additives. Ocean Eng. 2014. Vol. 84. pp. 183–193. DOI: 10.1016/j.oceaneng.2014.04.009 14. Elhalawany N., Saleeb M. M., Zahran M. K. Novel anticorrosive emulsiontype paints containing organic/inorganic nanohybrid particles. Prog. Org. Coatings. 2014. Vol. 77. pp. 548–556. DOI: 10.1016/j.porgcoat.2013.11.019 15. Proença C. S., Pereira A. M., Pigliaru L., Rohr T. et al. Alternative chemical conversion pre-treatment for aeronautical aluminium alloy: characterisation and anticorrosion performance. CEAS Sp. J. 2023. Vol. 15. pp. 265–280. DOI: 10.1007/s12567-022-00459-8 16. Kosenko A., Kolomeichenko A. V., Kuznetsov Y. A., Titov N. V. et al. Investigation of coating thickness obtained by plasma electrolytic oxidation on aluminium alloys in electrolytes of type “КOH-H3BO3”. J. Phys. Conf. Ser. 2018. Vol. 1058. DOI: 10.1088/1742-6596/1058/1/012065 17. Egorkin V. S., Gnedenkov S. V., Sinebryukhov S. L., Vyaliy I. E. et al. Increasing thickness and protective properties of PEO-coatings on aluminum alloy. Surf. Coatings Technol. 2018. Vol. 334. pp. 29–42. DOI: 10.1016/j.surfcoat.2017.11.025 18. Liu Y.-F., Liskiewicz T., Yerokhin A., Korenyi-Both A. et al. Fretting wear behavior of duplex PEO/chameleon coating on Al alloy. Surf. Coatings Technol. 2018. Vol. 352. pp. 238–246. DOI: 10.1016/j.surfcoat.2018.07.100 19. Rodriguez L., Paris J.-Y., Denape J., Delbé K. Micro-arcs oxidation layer formation on aluminium and coatings tribological properties—А review. Coatings. 2023. Vol. 13. DOI: 10.3390/coatings13020373 20. Shim H.-E., Lee B.-M., Lim D.-H., Nam Y.-R. et al. A comparative study of gamma-ray irradiation-induced oxidation: polyethylene, poly (vinylidene fluoride), and polytetrafluoroethylene. Polymers (Basel). 2022. Vol. 14. DOI: 10.3390/polym14214570 21. Mashtalyar D. V., Nadaraia K. V., Imshenetskiy I. M., Belov E. A. et al. Composite coatings of AMg3 alloy formed by a combination of plasma electrolytic oxidation and fluoropolymer spraying. Molecules. 2023. Vol. 28. DOI: 10.3390/molecules28020465 22. Egorkin V. S., Vyaliy I. E., Gnedenkov A. S., Kharchenko U. V. et al. Corrosion properties of the composite coatings formed on PEO pretreated AlMg3 aluminum alloy by dip-coating in polyvinylidene fluoride-polytetrafluoroethylene suspension. Polymers (Basel). 2024. Vol. 16. DOI: 10.3390/polym16202945 23. Lu C., Feng X., Yang J., Jia J. et al. Influence of surface microstructure on tribological properties of PEO-PTFE coating formed on aluminum alloy. Surf. Coatings Technol. 2019. Vol. 364. pp. 127–134. DOI: 10.1016/j.surfcoat.2019.02.064 24. Meng Y., Gao Y., Li J. et al. Preparation and characterization of cross-linked waterborne acrylic /PTFE composite coating with good hydrophobicity and anticorrosion properties. Colloids Surfaces A Physicochem. Eng. Asp. 2022. Vol. 653. DOI: 10.1016/j.colsurfa.2022.129872 25. Egorkin V. S., Mashtalyar D. V., Gnedenkov A. S., Filonina V. S. et al. Icephobic performance of combined fluorine-containing composite layers on al-mg-mn–si alloy surface. Polymers (Basel). 2021. Vol. 13. DOI: 10.3390/polym13213827 26. Tsvetnikov A. K. Thermogradient method of synthesis of nano- and microdisperse fluorocarbon materials. Properties and applications. Vestnik of Far Eastern Branch of Russian Academy of Sciences. 2009. No. 2. pp. 18–22. 27. Radwan A. B., Mohamed A. M. A., Abdullah A. M., Al-Maadeed M. A. Corrosion protection of electrospun PVDF–ZnO superhydrophobic coating. Surf. Coatings Technol. 2016. Vol. 289. pp. 136–143. DOI: 10.1016/j.surfcoat.2015.12.087 28. GOST 4784–2019. Aluminium and wrought aluminium alloys. Grades. Introduced: 01.09.2019. 29. Drop Shape Analyzer DSA100B. — URL: https://www.kruss-scientific.com/en/products-services/products/dsa100b (дата обращения: 10.12.2024). 30. Wang P., Li C., Zhang D. Recent advances in chemical durability and mechanical stability of superhydrophobic materials: Multi-strategy design and strengthening. J. Mater. Sci. Technol. 2022. Vol. 129. pp. 40–69. DOI: 10.1016/j.jmst.2022.01.045 31. GOST 11629–75. Plastics. Method for determination of friction coefficient. Introduced: 01.01.1977. 32. Murzin S. P., Balyakin V. B., Gachot C., Fomchenkov S. A. et al. Ultraviolet nanosecond laser treatment to reduce the friction coefficient of silicon carbide ceramics. Appl. Sci. 2021. Vol. 11. DOI: 10.3390/app112411906 |