Журналы →  Eurasian mining →  2024 →  №1 →  Назад

SATBAYEV UNIVERSITY
Название The use of mining and metallurgy waste in manufacture of building materials
DOI 10.17580/em.2024.01.04
Автор Begentayev M. M., Nurpeisova M. B., Fedotenko V. S., Bek A. A.
Информация об авторе

Satbayev University, Almaty, Kazakhstan

Begentayev M. M., Member of the Board, Doctor of Economic Sciences
Nurpeisova M. B., Professor, Doctor of Engineering Sciences, marzhan-nurpeisova@rambler.ru
Bek A. A., Senior Lecturer, Candidate for a Doctor’s Degree


Research Institute of Comprehensive Exploitation of Mineral Resources– IPKON, Moscow, Russia

Fedotenko V. S., Deputy Director of Scientific Work, Doctor of Engineering Sciences

Реферат

This article describes R&D connected with the technology of production of building materials using waste of the mining and metallurgical industry. The subject of research are mill tailings, as well as backfill and reinforcement mixtures with and without addition of tailings. The object of research are physical and mechanical properties, and features of curing of the test mixtures in the conditions of natural humidity. The characteristics of the initial materials, compositions of backfill and reinforcement mixtures, and their physical and mechanical properties were determined using standard techniques, and the physicochemical properties were identified from the X-ray diffraction analysis and infrared spectroscopy. Phases were specified on diffraction device DRON-3M, and the chemical analysis used X-ray fluorescent spectrometer EDX-8000. The granulometry was determined using three methods: sieve analysis by multifrequency screener MSA W/D-200 Kroosh Technologies Ltd.; diffraction analysis by laser particle size analyzer Helos-KR with Quixel add-on; dispersion analysis by a dry powder dispersion unit. Toward the industrial and ecological safety, the qualitative and quantitative characteristics of waste from some large mines in Kazakhstan are described, and the environmental damage of the mining industry waste is investigated and taken into account. Mill tailings of a processing plant of a mining company in the Republic of Kazakhstan are analyzed. Some technologies are proposed to manufacture dry building mixtures and aerated concrete using mineral processing waste. The use of manmade mineral feedstock in manufacture of dry building mixtures and aerated concrete allows total substitution of carbonate and silica components, and saves consumption of Portland cement. The technical and economic effect of application of the developed compositions as masonry, finishing and polymeric materials for the building industry of Kazakhstan totals 329–2700 Tenge/mof mixture. The technology of no cement porous concrete manufacture uses a binder represented by burnt and ground lime from furnacing of carbonate-bearing waste. The binder is used jointly with a silica component — tailings of rare metal and complex ore processing, containing silicon dioxide. The technology of manufacture of aerated concrete using tailings is aimed at achieving: required thermal–insulating properties at the average dry density not higher than 500 kg/m3, structural–thermal–insulating properties at the average dry density of 500–900 kg/m3 and structural properties at the average dry density of 900–1200 kg/m3.

This study was supported by the Ministry of Science of Higher Education of the Republic of Kazakhstan, Grant No. ВR21882292 Integrated Development of Sustainable Building Industry: Technological Innovations, Production Optimization, Efficient Resources Use and Technology Park Creation.

Ключевые слова Mining and metallurgy waste, ecological risks, mineral mining, open pit, underground mine, concentration plant, jointing, fractures, rock falls, reinforcement, mining waste, building materials
Библиографический список

1. Information on organization of waste management in regions of the Republic of Kazakhstan. Astana, 2018. 2019. Available at: http://ecogosfond.kz/wpcontent/uploads/2019/11/Informacionnyj-obzor-po-vedeniju-gosudarstvennogo-kadastra-othodov-za-2018_compressed.pdf (accessed: 11.04.2024).
2. Lewińska P., Dyczko A. Thermal digital terrain model of a coal spoil tip — A way of improving monitoring and early diagnostics of potential spontaneous combustion areas. Journal of Ecological Engineering. 2016. Vol. 17, Iss. 4. pp. 170–179.
3. Wang J., Apel D. B., Dyczko A., Walentek A., Prusek S. et al. Analysis of the damage mechanism of strainbursts by a global–local modeling approach. Journal of Rock Mechanics and Geotechnical Engineering. 2022. Vol. 14, Iss. 6. pp. 1671–1696.
4. Zhang L. Production of bricks from waste materials — A review. Construction and Building Materials. 2013. Vol. 47. pp. 643–655.
5. SaIguero Е., Grande Ј. А., Vabnte Т. et al. Recycling of manganese gangue materials from waste-dumps in the lberian Pyrite Веlt — Application as filler for concrete production. Construction and Building Materials. 2014. Vol. 54. pp. 363–368.
6. Melkonyan R. G. Environmental problems of waste disposal mining for glass and construction industry. Journal of Science and Education of North-West Russia. 2017. Vol. 3, No. 1. pp. 58–69.
7. Baibatsha A., Omarova G., Dyussembayeva K. Sh., Kassenova A. T. Kokkiya — A promising for Kazakhstan gold-metasomatic type of deposit. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM, 2016. Vol. 1. pp. 289–296.
8. Jiang Shi., Feng Не., Chuqiao Yе. et al. Preparation and characterization of CaO-AlО-SiO2 glass-ceramics from molybdenum tailings. Materials Chemistry and Physics. 2017. Vol. 197. pp. 57–64.
9. Lygina T. Z., Luzin V. P., Kornilov A. V. Multi-purpose use of technogenic non-metallic raw materials and obtaining new types of products from them. Theoretical Framework and Practice of Ore and Manmade Waste Processing — XXII International Conference Proceedings. 2017. Vol. 1. pp. 67–71.
10. Baidjanov D. O., Rahimov M. A., Rahimov A. M. Technology for producing foam glass-crystalline heat-insulating materials based on industrial waste. Trudy universiteta. 2017. No. 4(69). pp. 73–76.
11. Utegulov B., Utegulov A., Begentayev M., Uakhitova A., Zhakipov N. et al. Method for determining the insulation in asymmetric networks with voltage up to 1000 V in mining enterprises. Proceedings of the IASTED International Conference on Power and Energy Systems and Applications, PESA 2011. 2011. pp. 54–57
12. Kenzhina I. E., Kozlovskiy A. L., Chikhray Y. et al. Study of Gas Swelling Processes under Irradiation with Protons and He2+ Ions in Li4SiO4–Li2TiO3 Ceramics. Crystals. 2023. Vol. 13, Iss. 10. ID 1526.
13. Zikirina A. M., Temirtassova A., Kozlovskiy A. L., Kenzhina I. E., Begentayev M. М. Synthesis, characterization and evaluation of the application of cozn nanostructures as anode materials. Batteries. 2023. Vol. 9, Iss. 8. ID 421.
14. Nurpeisova М., Estemesov Z., Gabbasov S., Аshimova А., Bek А. Studying the properties of ash and slag waste for use in the manufacture of construction products. Mining of Mineral Deposits. 2023. Vol. 17, Iss. 3. pp. 102–109.
15. Sultanbekov T. K., Shayahmetov G. Z., Dauletov N. D., Estemesov Z. A. Dry building mixture mini-plant. Cement and Its Applications. 2000. No. 3. pp. 38-40.
16. Bek A. A. Pit wall slope reinforcement method. Certificate of the Republic of Kazakhstan of inclusion of data in the state register of rights for objects (art of science), No. 31344. 22.12.2022.
17. Bek А. А., Yestemesov Z. А., Baidzhanov D. О., Fedotenko N. А. Effective strengthening solutions for fractured rock masses using tailings. Eurasian Mining. 2022. No. 1. pp. 59–63.
18. Kuldeyev E., Seitzhanova M, Tanirbergenova S., Tazhu, K., Doszhanov E. et al. Modifying natural zeolites to improve heavy metal adsorption. Water. 2023. Vol. 15, Iss. 12. ID 2215.
19. Nurpeisova М. B., Yestemesov Z. А., Lozinsky V. G., Аshimova А. А. et al. Industrial waste recycling — one of the key directions of business development. News of the National Academy of Sciences of the Republic of Kazakhstan. Series of Geology and Technical Sciences. 2023. Vol. 3, No. 459. pp. 193–205.
20. Nurpeisova M. B., Estemesov Z. A., Fedotenko N. A., Gabbasov S. G Technology of utilization and use of ash and slag waste to ensure environ mental safety at the region. Sustainable Development of Mountain Territories. 2023. Vol. 15, No. 3(57). pp. 631–639.
21. Kuldeyev Е. I., Nurpeisova М. B., Fedorov E. V., Аshimova А. A. Study of aggloporite producibility from the Ekibaztuz coal ashes. Eurasian Mining. 2023. No. 2. рр. 85–88.

Полный текст статьи The use of mining and metallurgy waste in manufacture of building materials
Назад