Журналы →  Obogashchenie Rud →  2023 →  №6 →  Назад

ENVIRONMENT PROTECTION TECHNOLOGY
Название Tunneling complex for the construction of especially hazardous waste storage facilities: justification of the design and parameters
DOI 10.17580/or.2023.06.08
Автор Yungmeyster D. A., Urazbakhtin R. Yu., Nguyen Khak Linh, Timofeev M. I.
Информация об авторе

Empress Catherine II Saint Petersburg Mining University (St. Petersburg, Russia)

Yungmeyster D. A., Professor, Doctor of Engineering Sciences, Senior Researcher, Yungmeyster_DA@pers.spmi.ru
Urazbakhtin R. Yu., Executive Director of the Center for Shared Use of High-Tech Equipment, Candidate of Engineering Sciences, urazbakhtin_ryu@pers.spmi.ru
Timofeev M. I., Student, s181244@stud.spmi.ru

Hanoi University of Mining and Geology (Hanoi, Vietnam).

Nguyen Khak Linh, Assistant, Candidate of Engineering Sciences, khaclinhhumg@gmail.com

Реферат

The ongoing industrial and production advancements lead to the large-scale accumulation of especially hazardous waste that is unfit for recycling or disposal and requires special treatment and storage. Construction of new or restoration of previously destroyed storage facilities for such waste will safeguard the environment and help meet the applicable environmental standards, i. e. when storing radioactive waste generated in ore mining, enrichment of uranium and thorium, and processing of their concentrates. The purpose of this work is to specify the design and power parameters for roof support travel hydraulic jacks to ensure reliable and safe relocation of the machine used for the construction of the above storage facilities and its components. The systemic approach used in this work covers various aspects and methods of analysis. Analytical methods enable theoretical analysis and allow building models of the system based on the basic principles of theoretical mechanics. Computational methods are used for numerical modeling and solving the resulting mathematical models. A theoretical value of the motion resistance coefficient has been established for the machine at 0.4 to 6. This indicates high motion resistance caused by various factors, including the weight of machine parts, the rock strength, and the travel increment size. Machine operation specifics for various rock strengths are discussed and recommendations are given for the selection of power equipment. In order to confirm the data, a 3D model loading process was performed for a walking roof support section using the finite element method in the AutoDesk Inventor software. Based on the modeling results, the structures were additionally reinforced to ensure safe operation of the machine.

Ключевые слова Environmental studies, storage of especially hazardous waste, storage of radioactive waste, tunnel boring machine, rock strength, replaceable operating member, 3D modeling
Библиографический список

1. Marsh A. I., Williams L. G., Lawrence J. A. The important role and performance of engineered barriers in a UK geological disposal facility for higher activity radioactive waste. Progress in Nuclear Energy. 2021. Vol. 137. DOI: 10.1016/j.pnucene.2021.103736
2. Kale R. C., Ravi K. A review on the impact of thermal history on compacted bentonite in the context of nuclear waste management. Environmental Technology & Innovation. 2021. Vol. 23. DOI: 10.1016/j.eti.2021.101728
3. Gee G. W., Meyer P. D., Ward A. L. Nuclear waste disposal. Encyclopedia of soils in the environment. Oxford: Elsevier Ltd., 2005. pp. 56–63.
4. Kim M.-J., Lee S.-R., Yoon S., Jeon J.-S., Kim M.-S. Optimal initial condition of a bentonite buffer with regard to thermal behavior in a high-level radioactive waste repository. Computers and Geotechnics. 2018. Vol. 104. pp. 109–117.

5. Cui C.-Q., Wang B., Zhao Y.-X., Xue L.-M. Waste mine to emerging wealth: Innovative solutions for abandoned underground coal mine reutilization on a waste management level. Journal of Cleaner Production. 2020. Vol. 252. DOI: 10.1016/j.jclepro.2019.119748
6. Chen T., Yang N. Study on the underground storage of hazardous waste of the micro-seismic signal based on the S-transform time-frequency analysis. Procedia Environmental Sciences. 2016. Vol. 31. pp. 426–431.
7. Chen X., Li Y., Shi Y., Yu Y., Jiang Y., Liu Y., Dong J. Tightness and stability evaluation of salt cavern underground storage with a new fluid–solid coupling seepage model. Journal of Petroleum Science and Engineering. 2021. Vol. 202. DOI: 10.1016/j.petrol.2021.108475
8. Hacioğlu F., Özdemir T., Çavdar S., Usanmaz A. Possible use of EPDM in radioactive waste disposal: Long term low dose rate and short term high dose rate irradiation in aquatic and atmospheric environment. Radiation Physics and Chemistry. 2013. Vol. 83. pp. 122–130.
9. Foster R. I., Amphlett J. T. M., Kim K.-W., Kerry T., Lee K.-Y., Sharrad C. A. SOHIO process legacy waste treatment: Uranium recovery using ion exchange. Journal of Industrial and Engineering Chemistry. 2020. Vol. 81. pp. 144–152.
10. Wei G., Han W., Shu X., Luo F., Tang H., Chen S., Lu X. Heavy-ion irradiation effects on uranium-contaminated soil for nuclear waste. Journal of Hazardous Materials. 2021. Vol. 405. DOI: 10.1016/j.jhazmat.2020.124273
11. Álvarez-Ayuso E., Murciego A., Rodríguez M. A., Mosser-Ruck R. Cement encapsulation processes to mitigate the risks posed by different types of antimony-bearing mine waste. Journal of Cleaner Production. 2022. Vol. 372. DOI: 10.1016/J.JCLEPRO.2022.133671
12. Bolobov V. I., Plashchinsky V. A. On the assessment of energy consumption when splitting rock fragments. Obogashchenie Rud. 2023. No. 2. pp. 3–8.
13. Lavrenko S. A., Shishlyannikov D. I. Performance evaluation of heading-and-winning machines in the conditions of potash mines. Applied Sciences. 2021. Vol. 11. DOI: 10.3390/app11083444
14. Zhukov I. A., Martyushev N. V., Zyukin D. A., Azimov A. M., Karlina A. I. Modification of hydraulic hammers used in repair of metallurgical units. Metallurgist. 2023. Vol. 66. pp. 1644–1652.
15. Fiscor S. Rescuers work to free chilean miners. Engineering and Mining Journal. 2010. Vol. 211, Iss. 8. pp. 24–26.
16. Kral S. Remarkable rescue unfolds. Mining Engineering. 2010. Vol. 62, Iss. 9. p. 96.
17. Liu Z., Ni F., Wei C., Li H. Experimental and numerical investigation of roadheader for breaking rock containing predrill holes. Energy Science and Engineering. 2020. Vol. 8, Iss. 7. pp. 2511–2526.
18. Yacheykin A. I. Determination of rational designs and parameters of the executive body of large-diameter tunneling shields for the mining and geological conditions of the mines of Metrostroy St. Petersburg. Diss. for the degree of Candidate of Engineering Sciences. St. Petersburg, 2021. 135 p.
19. Gabov V. V., Nguyen Van Xuan, Zadkov D. A., Tran Duc Tho. Increasing the content of coarse fractions in the mined coal mass by a combine using paired cuts. Zapiski Gornogo Instituta. 2022. Vol. 257. pp. 764–770.
20. Urazbakhtin R. Yu., Yungmeister D. A. The results of theoretical and laboratory studies of the rescue complex for coal mines. Izvestiya Uralskogo Gosudarstvennogo Gornogo Universiteta. 2019. Iss. 3. pp. 98–103.
21. Shemyakin S. A., Shishkin E. A. Physical and mathematical model of rock destruction by a milling machine cutter. Zapiski Gornogo Instituta. 2021. Vol. 251. pp. 639–647.
22. Averin E. A., Zhabin A. B., Polyakov A. V., Linnik Y. N., Linnik V. Y. Transition between relieved and unrelieved modes when cutting rocks with conical picks. Zapiski Gornogo Instituta. 2021. Vol. 249. pp. 329–333.
23. Linh N. K., Chien D. V., Gabov V. V., Giap D. V., Tien P. V. Study of the influence of structure and parameters of loading and transporting devices of a cleaning combine on the efficiency of coal loading. Journal of Physics: Conference Series. 2019. Vol. 1384. DOI: 10.1088/1742-6596/1384/1/012036
24. Yasar S., Yilmaz A. O. Vertical rock cutting rig (VRCR) suggested for performance prediction of roadheaders. International Journal of Mining, Reclamation and Environment. 2019. Vol. 33, Iss. 3. pp. 149–168.
25. Kahraman S., Sercan Aloglu A., Aydin B., Saygin E. The needle penetration index to estimate the performance of an axial type roadheader used in a coal mine. Geomechanics and Geophysics for Geo-Energy and Geo-Resources. 2019. Vol. 5, Iss. 1. pp. 37–45.
26. Gamez-Montero P. J., Salazar E., Castilla R., Freire J., Khamashta M., Codina E. Misalignment effects on the load capacity of a hydraulic cylinder. International Journal of Mechanical Sciences. 2009. Vol. 51. pp. 105–113.
27. Yong X., Yang J., Shang J., Xie H. Design and optimization of a new kind of hydraulic cylinder for mobile robots. Proc. of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2015. Vol. 229, Iss. 18. DOI: 10.1177/0954406215570106
28. Zhang M., Lyu F., Fu S., Cai X., Zong K., Wu M. Study on the pitch angle control of a robotized hydraulic drive roadheader using different control methods. Journal of Mechanical Science and Technology. 2018. Vol. 32, Iss. 10. pp. 4893–4901.
29. Rybak J., Khayrutdinov M. M., Kuziev D. A., Kongar-Syuryun Ch. B., Babyr N. V. Prediction of the geomechanical state of the rock mass when mining salt deposits with stowing. Zapiski Gornogo Instituta. 2022. Vol. 253. pp. 61–70.
30. Nguyen Tai Tien, Karasev M. A. Optimization of geometry design of quasi-rectangular section tunnel by the force criterion. Gornyi Informatsionno-analiticheskiy Byulleten'. 2021. No. 6. pp. 59–71.
31. Zhang L., Tian M., Song J., He Y., Feng J., Liu X. Hardness recognition method of roadheader's cutting rock wall based on multi-source data fusion. Zhendong yu Chongji / Journal of Vibration and Shock. 2020. Vol. 39, No. 13. pp. 7–15.
32. Karasev M. A., Tien Tai Nguyen. Method for predicting the stress state of the lining of under-ground structures of quasi-rectangular and arched forms. Zapiski Gornogo Instituta. 2022. Vol. 257. pp. 807–821.
33. Gospodarikov A. P., Trofimov A. V., Kirkin A. P. Evaluation of deformation characteristics of brittle rocks beyond the limit of strength in the mode of uniaxial servohydraulic loading. Zapiski Gornogo Instituta. 2022. Vol. 256. pp. 539–548.
34. Korshunov V. A., Pavlovich A. A., Bazhukov A. A. Evaluation of the shear strength of rocks by cracks based on the results of testing samples with spherical indentors. Zapiski Gornogo Instituta. 2023. Vol. 262. pp. 606–618.
35. Protosenya А. G., Alekseev А. V., Verbilo P. E. Prediction of the stress-strain state and stability of tunnel face at the intersection of disturbed zones of the soil mass. Zapiski Gornogo Instituta. 2022. Vol. 254. pp. 252–260.
36. Kazanin O. I., Ilinets A. A. Ensuring the excavation workings stability when developing excavation sites of flatlying coal seams by three workings. Zapiski Gornogo Instituta. 2022. Vol. 253. pp. 41–48.

Language of full-text русский
Полный текст статьи Получить
Назад