Empress Catherine II St. Petersburg Mining University (St. Petersburg, Russia)

B. Issa, Cand. Eng., Assistant. Dept. of General and Physical Chemistry, e-mail: basharissashtain@gmail.com, basharissa3@gmail.com
V. Yu. Bazhin, Dr. Eng., Prof., Head of Metallurgy Dept., e-mail: bazhin-alfoil@mail.ru
K. G. Karapetyan, Dr. Eng., Associate Prof., Head of the Dept. of Chemical Technologies and Processing of Energy
Carriers, e-mail: kir64@list.ru

The damage caused by crude oil impurities is in no way proportional to their small amounts, because there is an integrated system based on chemical composition and structure, chemical and electrochemical nature of corrosion processes, as well as sequence and synchronization between various damage mechanisms. Study of the influence of the heterogeneous metal content of the organic phase or steel matrix on premature failure of steel coils and equipment in oil refineries due to its aggressive role in corrosion processes allows us to reach certain rate-limiting stages of corrosion, which can help us describe better solutions to protect them against corrosion and premature failure. Industrial problems at which multiple sciences intersect represent challenging research tasks. On the other hand, solving them is as difficult as it is, as much as it adds wider interconnection between the various sectors of science, which would provide a clearer and deeper understanding to the problems faced by researchers that contributes to a multidimensional scientific-industrial development.

1. Issa B., Bazhin V. Yu., Karapetyan K. G. The role of multi-phase metal content in corrosion and premature failure of steel equipment in oil refineries and appropriate methods to mitigate its effects. Part 1. CIS Iron and Steel Review. 2023. Vol. 25. pp. 90-96.
2. Kameshkov A. V., Rudko V. A., Gabdulkhakov R. R., Povarov V. G., Pyagay I. N. Technology of producing petroleum coking additives to replace coking coal. ACS Omega. 2021. No. 6 (51). pp. 35307–35314.
3. Al-Moubaraki A. H., Obot I. B. Corrosion challenges in petroleum refinery operations: Sources, mechanisms, mitigation, and future outlook. Journal of Saudi Chemical Society. 2021. Vol. 25. No. 12. 101370. pp. 1-28.
4. Beloglazov I., Morenov V., Leusheva E., Gudmestad O. T. Modeling of heavy-oil flow with regard to their rheological properties. Energies. 2021. Vol. 14. No. 2. 359. pp. 1-15.
5. Baranwal P. K., Das S., Venkatesh R. P. The Effect of Cations on Carbon Steel Corrosion in Chloride Media. Electrochemical Society: New Orleans, Louisiana, USA. 2017. pp. 1-8.
6. Soliz A., Cáceres L. Corrosion of a carbon steel cylindrical band exposed to a concentrated NaCl solution flowing through an annular flow cell. Electrochemical Society. 2015. 162. p. 385395.
7. Prosek T., Thierry D., Taxen C., Maixner J. Effect of cations on corrosion of zinc and carbon steel covered with chloride deposits under atmospheric conditions. Corrosion Science. 2007. Vol. 49. pp. 2676–2693.
8. Otani K., Sakairi M., Sasaki R., Kaneko A., Seki Y., Nagasawa D. Effect of metal cations on corrosion behavior and surface film structure of the A3003 aluminum alloy in model tap waters. J. Solid State Electrochem. 2014. Vol. 18. pp. 325–332.
9. Ogundele G. I. The effect of cation on the corrosion of carbon and stainless steels in differing chloride environments. Corrosion. 1989. Vol. 45. pp. 981–983.
10. Cáceres L., Vargas T., Herrera L. Influence of pitting and iron oxide formation during corrosion of carbon steel in unbuffered NaCl solutions. Corrosion Science. 2009. Vol. 51. pp. 971–978.
11. Issa B., Bazhin V. Yu., Telyakov N. M., Telyakov A. N. The role of chloride, oxygen and aluminum on corrosion resistance of coiledpipes in tubular furnaces of oil refinery. IOP Conference Series: Materials Science and Engineering. 2019. Vol. 666 (1). 012027. pp. 1-8.
12. Issa B., Bazhin V. Yu., Aleksandrova T. A. Increasing the corrosion resistance of tubular furnace elements at temperature range 400-700 °C in accelerated testing for real operational conditions. Advances in Raw Material Industries for Sustainable Development Goals. 2021. pp. 174–185.
13. Issa B., Bazhin V. Yu. Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 2. CIS Iron and Steel Review. 2021. Vol. 21. pp. 9–15.
14. Issa B., Bazhin V. Yu., Aleksandrova T. A., Povarov V. G. Assessment of possibility of obtaining alloying components in the process of desalting of heavy hydrocarbon raw materials. Part 1. CIS Iron and Steel Review. 2020. Vol. 19. pp. 8–12.
15. Issa B., Bazhin V. Yu., Telyakov N. M., Telyakov A. N. Increasing of corrosion resistance of welded radiant and convection coiled-pipes in tubular furnaces at kinef crude oil refinery. Youth Technical Sessions Proceedings - Proceedings of the 6^th Youth Forum of the World Petroleum Council-Future Leaders Forum, 2019. 2019. pp. 243–249.
16. Korshunov G. I., Eremeeva A. M., Drebenstedt C. Justification of the use of a vegetal additive to diesel fuel as a method of protecting underground personnel of coal mines from the impact of harmful emissions of diesel-hydraulic locomotives. Journal of Mining Institute. 2021. Vol. 247. pp. 39-47. DOI: 10.31897/PMI.2021.1.5
17. Nazarenko M. Yu., Saltykova S. N. Influence of oil shale semicoking parameters on the quality of shale semi-coke. Bulletin of the Tomsk Polytechnic University, Geo Assets Engineering. 2021. Vol. 332. No. 9. pp. 109–118.
18. Otani K., Sakairi M. Effects of metal cations on corrosion of mild steel in model fresh water. Corrosion Science. 2016. Vol. 111. pp. 302-312. DOI: 10.1016/j.corsci.2016.05.020
19. Buslaev G., Morenov V., Konyaev Y., Kraslawski A. Reduction of carbon footprint of the production and field transport of high-viscosity oils in the Arctic region. Chemical Engineering and Processing - Process Intensification. 2021. Vol. 159. 108189. pp. 1-8.
20. Golubev I. A.,Golubev А. V., Laptev А. B. Practice of using the magnetic treatment devices to intensify the processes of primary oil treating. Journal of Mining Institute. 2020. Vol. 245. pp. 554-560. DOI: 10.31897/PMI.2020.5.7
21. Nikolaeva N. V., Aleksandrova T. N., Elbendari A. M. Ore strength property evaluation in the design of ore preparation cycles. Geomechanics and Geodynamics of Rock Masses. 2018. No. 1. pp. 333–338.
22. Lobacheva O., Dzhevaga N. Method for removing valuable components from technogenic solutions by the example of rare earth elements. Journal of Physics: Conference Series. 2020. Vol. 1679 (4). 042016. pp. 1-7.
23. Bazhin V. Y., Issa B. Influence of heat treatment on the microstructure of steel coils of a heating tube furnace. Journal of Mining Institute. 2021. Vol. 249. No. 5. p.393–400.
24. Schipachev A. M.,Gorbachev S. V. Influence of Post-welding Processing on Continuous Corrosion Rate and Microstructure of Welded Joints of Steel 20 and 30KhGSA. Journal of Mining Institute. 2018. Vol. 231. pp. 307-311. DOI: 10.25515/PMI.2018.3.307
25. Kazakov A. A., Kiselev D. V., Kur A. A., Lazutova E. B. Development of quantitative methods of assessment of structure of hypoeutectic silumins for forecasting of their mechanical properties. Tsvetnye Metally. 2014. No. 4. pp. 51-55.
26. Cheremisina O., Lutsky D., Fedorov A. Comparison of extraction methods for extraction of iron, aluminum, manganese and titanium using carboxylic acids and natural vegetable oils from water-salt systems. International Multidisciplinary Scientific GeoConference Surveying Geology and Mining Ecology Management, SGEM. 2017. Vol. 17. No. 11. pp. 803–810.
27. Mansurov Yu. N., Rakhmonov J. U., Letyagin N. V., Finogeyev A. S. Influence of impurity elements on the casting properties of Al-Mg based alloys. Non-ferrous Metals. 2018. No. 1. pp. 24-29.
28. Sobianina D. O., Kogan V. E., Zgonnik P. V., Shakhparonova T. S., Suvorova Z. V. The physicochemical bases of oil and oil products absorption by glassy sorbents. Rasayan Journal of Chemistry. 2021. No. 14 (3). pp. 2006–2016. DOI: 10.12912/27197050/133331
29. Bolobov V. I., Popov G. G. Methodology for testing pipeline steels for resistance to grooving corrosion. Journal of Mining Institute. 2021. Vol. 252. pp. 854-860. DOI: 10.31897/PMI.2021.6.7
30. Illarionov I. E., Sadetdinov Sh. V. Corrosion of ferrous metals in environments imitated the conditions of vehicles operation. Chernye Metally. 2019. No. 4. pp. 67-72.
31. Baranwal P. K., Venkatesh R.P. Investigation of carbon steel anodic dissolution in ammonium chloride solutions using electrochemical impedance spectroscopy. J. Solid State Electrochem. 2017. Vol. 21. pp. 1373–1384.
32. Penyaz M., Popov N., Ivannikov A., Sevryukov O. Alloying-dependent microstructure influence on corrosion resistance of AISI 321 cell joints brazed by Ni-based filler metals. Non-ferrous Metals. 2020. No. 1. pp. 41-48.
33. Kotsar M. L., Kaplenkov V. N., Alekberov Z. M. Obtaining the highpure titanium based alloys. Investigation of their composition and properties. Tsvetnye Metally. 2017. No. 6. pp. 84-93.
34. Davydov A. D., Erokhina O. O., Ryaboshuk S. V., Kovalev P. V. Analysis of the causes of cracks in the production of ingots and forgings from austenitic stainless steel 08Х18Н10Т (Aisi 321). Key Engineering Materials. 2020. Vol. 854. pp. 16–22.
35. Watson T. M., Coleman A. J., Williams G., McMurray H. N. The effect of oxygen partial pressure on the filiform corrosion of organic coated iron. Corrosion Science. 2014. Vol. 89. pp. 46–58.
36. Yao T., Guo X., Lei P. Wang Y., Frankel G. S., Lian J. Corrosion interactions between stainless steel and lead vanado-iodoapatite nuclear waste form. Part II. Materials degradation. 2020. Vol. 4 (1). 15. pp. 1-10. DOI: 10.1038/s41529-020-0119-9