Журналы →  Tsvetnye Metally →  2023 →  №8 →  Назад

Marking the 250th anniversary of the Empress Catherine II St Petersburg Mining University and the 20th anniversary of the Nanophysics & Nanomaterials International Conference
Название Deposition of polylayers of thin metallic films onto both surfaces of polymer films
DOI 10.17580/tsm.2023.08.05
Автор Tupik V. A., Margolin V. I., Kostrin D. K., Farmakovskiy B. V.
Информация об авторе

Saint Petersburg Electrotechnical University LETI, Saint Petersburg, Russia

V. A. Tupik, Professor, Vice Rector for Research, Head of the Department of Microradioelectronics and Radio Technology, Doctor of Technical Sciences

V. I. Margolin, Professor at the Department of Microradioelectronics and Radio Technology, Academician at the Prokhorov Academy of Engineering Sciences, Doctor of Technical Sciences, e-mail: V.Margolin@mail.ru
D. K. Kostrin, Associate Professor, Deputy Head of the Department of Electronic Instruments and Devices, Candidate of Technical Sciences


Kurchatov Institute National Research Centre, Gorynin Central Research Institute of Structural Materials Prometey, Saint Petersburg, Russia:
B. V. Farmakovskiy, Associate Professor, Academic Secretary, Candidate of Technical Sciences


Magnetron sputtering is currently one of the techniques that offer most performance and precision when obtaining nanofilms, in particular metallic ones, such as titanium, silver, nickel and copper films. Such processes are normally performed in a high vacuum environment, which results in pure and high-purity films that are almost entirely free of impurities. Difficulty can arise when one needs to obtain thin films on substrates made of materials that cannot be subjected to heat during film deposition. Polymer films can serve as an example of such substrates. Nor should heat be used with substrates made of ferroelectric materials. It is often the case that multi-layer nanosized compositions should be deposited on such substrates in one process cycle. When polymer or piezoelectric films are used as substrates, it creates a number of issues as such films are quite sensitive to external effects. It means that one should ensure an appropriate temperature mode preventing a rise of more than 3 to 5 oC during deposition. That’s why one has to go layer by layer when doing one deposition cycle while maintaining the required temperature mode. One should also observe the established procedures when doing each layer. The developed unit consists of a vacuum chamber with a carousel type gear and substrate holders. The latter ensure multiple passages of substrates through the sputtering zone. And both sides of the substrate are sputtered in one process cycle. A substrate holder looks like two metal nonmagnetic frames with the sputtered film placed in between them.

Ключевые слова Nanofilms, double-sided coating, multi-layer coatings, magnetron sputtering, polymer films, single process cycle
Библиографический список

1. Grachev V. I., Zhabrev V. A., Margolin V. I., Tupik V. A. Synthesis of nanoparticles and nanofilms: Fundamentals. Izhevsk : Udmurtiya, 2014. 480 p.
2. Grachev V. I., Margolin V. I., Tupik V. A. Production of glow discharge radio electronics components: Process fundamentals. Norwegian Journal of Development of the International Science. 2017. Vol. 6. pp. 88–91.
3. Pleskunov I. V., Syrkov A. G., Yachmenova L. A., Mustafaev A. S. Innovative methods of processing and analysis of metalcontaining raw materials based on adsorption phenomenon. Innovation-Based Development of the Mineral Resources Sector: Challenges and Prospects. London: Taylor and Francis Group. 2019. pp. 341–351.
4. Bezmaternykh A. V., Levine K. L., Syrkov A. G. et al. Application of electrochemical impedance spectroscopy for characterization of nanoporous films. Nanoscale-Arranged Systems for Nanotechnology. New York : Nova Science Publishers, 2015. pp. 106–108.
5. Fridkin V. M., Ducharme S. Ferroelectricity at the nanoscale. Uspekhi fizicheskikh nauk. 2014. Vol. 184, No. 6. pp. 645–651.
6. Rogov A. V., Kapustin Yu. V. Martynenko Yu. V. Factors determining the efficiency of magnetron sputtering. Optimization criteria. Zhurnal tekhnicheskoy fiziki. 2015. Vol. 85, No. 2. pp. 126–134.
7. Melnikov S. N., Golosov D. A., Kundas S. P. Modelling the processes of magnetron deposition of film coatings onto stationary and moving substrates. Interaction between Radiation and the Solid Body: 9th International Conference. Minsk : Belorusskiy gosudarstvennyi universitet, 20–22 September 2011. pp. 429–431.
8. Gasanov I. S. Plasma and beam technology. Baku : Elm, 2007. 174 p.
9. Al Azzawi H. S. M., Korolev K. G., Makagonov V. A. et al. Structure and electrical properties of multi-layer films made of ferromagnetic-dielectric composites. Vestnik of Voronezh State Technical University. 2015. Vol. 18, No. 5. pp. 100–107.

10. Zagidullin A. I., Garipov R. M., Khasanov A. I., Efremova A. A. Effect of the multilayer film structure on the barrier properties of a polymer film material. Vestnik kazanskogo tekhnologicheskogo universiteta. 2014. No. 14.
pp. 151–153.
11. Syrkov A. G. The tribochemical properties of copper synergetically changing in the presence of quaternary compounds of ammonium on the surface. Russian Journal of General Chemistry. 2015. Vol. 85, No. 6. pp. 1043–1045.
12. Syrkov A. G., Taraban V. V., Kabirov V. R., Silivanov M. O. Stabilization of disperse metals by nitrogen-containing tensides with different-sized molecules. Journal of Physics: Conference Series. 2019. Vol. 1313. 012052.
13. Syrkov A. G., Bazhin V. Yu., Mustafaev A. S. U. Nanotechnology and nanomaterials. Aspects of physics and mineral raw materials. St. Petersburg : Politekh-Press, 2019. 244 p.
14. New Materials. Preparation, properties and applications in the aspect of nanotechnology. Ed. A. G. Syrkov, K. L. Levine. New York : Nova Science Publishers, 2020. 248 p.
15. Alekseeva O. K., Fateev V. N. Application of ion magnetron sputtering for the synthesis of nanostructured electrocatalysts (Review). Alternativnaya energetika i ekologiya. 2015. No. 7. pp. 14–36.
16. Gorbunova E. K., Tazenkov B. A., Boytsov V. G. et al. Method of making film piezoelectric cells. Certificate of authorship, SU 777885. No. 2714101. Applied: 11.12.1978. Published: 07.11.1980. Bulletin No. 41.
17. Official website of the Research Institute of Precision Machine Manufacturing (NIITM). Available at: http://www.niitm.ru (Accessed: 31.02.2023).
18. Odinokov V. V., Karakulov R. A., Panin V. V., Kachan N. O. Deposition of multi-layer coatings as part of the process of making energy output elements of microwave devices using vacuum units of the MAGNA TM type. Vacuum Technology-2022: Conference proceedings. 21–23 June 2022. St. Petersburg : Izdatelstvo SPbGETU “LETI”, 2022. pp. 244–248.
19. Ivanov A. A. Multi-layer nanocomposite ferroelectric films in microwave devices: Extended abstract of doctoral dissertation. Saint Petersburg, 2018. 30 p.
20. Zinoviev A. V., Piskarev M. S., Skryleva E. A. et al. Effect of plasma processing on the properties and structure of poly(vinyltrimethylsilane) films. Vacuum Technology-2022: Conference proceedings. 21–23 June 2022. St Petersburg : Izdatelstvo SPbGETU “LETI”, 2022. pp. 183–186.
21. Balashov V. M., Mironenko I. G., Ivanov A. A. et al. Technology and dielectric properties of multi-layer nanocomposite ferroelectric films. Voprosy radioelektroniki. 2018. No. 1. pp. 62–67.
22. Margolin V. I., Toisev V. N., Tupik V. A. et al. Device for depositing thin film coatings. Patent RF, No. 194223. No. 2019124953. Applied: 05.08.2019. Published: 03.12.2019. Bulletin No. 34.
23. Tupik V. A., Toisev V. N., Starobinets I. M. et al. Device for applying a metal coating on a piezofilm using a vacuum-plasma method. Patent RF, No. 2768679. No. 2021123473. Applied: 06.08.2021. Published: 24.03.2022. Bulletin No. 9.
24. Khrustaleva I. N., Lyubomudrov S. A., Larionova T. A., Brovkina A. Yu. Improved preproduction planning efficiency for the manufacturing of mining equipment components. Journal of Mining Institute. 2021. Vol. 249. pp. 417–426.
25. Baake E., Shpenst V. A. Recent scientific research on electrothermal metallurgical processes. Journal of Mining Institute. 2019. Vol. 240. pp. 660–668.
26. Konchus D. A., Sivenkov A. V. A Surface structure formation of stainless steel using a laser. Materials Science Forum. 2021. Vol. 1022. pp. 126–132.
27. Popova A. N., Klimeikov B. D., Grabovskiy A. K. Mining University’s plasma nanotechnology and energy school. Izvestiya VUZOV. Applied Nonlinear Dynamics. 2021. Vol. 29, No. 2. pp. 317–336.
28. Pryakhin Е. Л., Ligachev A. E., Kotobov Y. R. et al. Assessment of the thermal effect on the surface of metal structural materials on the stability of laser — induced code readability. Materials Science Forum. 2021. Vol. 1040. pp. 47–54.
29. Popova A. N., Kison V. E., Sukhomlinov V. S., Mustafaev A. S. Development of New Plasma Technology Method in Synthetic Materials. Materials Science Forum. 2021. Vol. 1040. pp. 87–93.

Language of full-text русский
Полный текст статьи Получить