Journals →  Non-ferrous Мetals →  2023 →  #1 →  Back

MATERIALS SCIENCE
ArticleName Composition, structure, and properties of heat-resistant alloys samples made from powders obtained by electroerosion of waste nickel alloys in kerosene
DOI 10.17580/nfm.2023.01.05
ArticleAuthor Ageev E. V., Pereverzev A. S., Khardikov S. V., Sabelnikov B. N.
ArticleAuthorData

South-West State University, Kursk, Russia:

E. V. Ageev, Professor of Department “Technology of Materials and Transport”, Head of Scientific Education Center “Powder Metallurgy and Functional Coatings”, e-mail: ageev_ev@mail.ru
A. S. Pereverzev, Assistant Professor of Department “Technology of Materials and Transport”
S. V. Khardikov, Senior Laboratory Assistant of Department “Technology of Materials and Transport”
B. N. Sabelnikov, Senior Lecturer of Department “Industrial and Civil Engineering”

Abstract

In the work scientific and applied principles of conjugation of the technology of obtaining nickel powder materials from waste heat-resistant nickel alloy of ZhS6U (ЖС6У) grade by electroerosion dispersion and technology of their compacting by spark plasma sintering are implemented. The purpose of this work was to study the composition, structure, and properties of heat-resistant products made by spark plasma sintering of powders obtained by electrodispersion of ZhS6U alloy waste in illuminating kerosene. Electrodispersion of waste heat-resistant ZhS6U alloy was carried out in illuminating kerosene on a patented unit. The conducted studies have shown that the method of electroerosion dispersion of ZhS6U alloy waste in illuminating kerosene makes it possible to obtain heat-resistant nickel alloy powder with a uniform distribution of alloying elements. The obtained heat-resistant nickel powder was sintered in the SPS 25-10 “Thermal Technology” system (USA). The economic efficiency of this method is due to the use of waste ZhS6U grade alloy in a low-energy production technology of heat-resistant alloys. The implementation of the planned activities will solve the problem of recycling waste heat-resistant nickel alloys and their reuse in the manufacture of heat-resistant products. Based on the experimental studies aimed at investigating the composition, structure and properties of sintered samples of heat-resistant alloys, from electric erosion powders obtained in illuminating kerosene, a high efficiency of spark plasma sintering technology has been shown, which provides for suppression of grain growth, low porosity and high physical and mechanical properties with uniform heat distribution over the sample and a short working cycle time. It is noted that the heat resistant alloys made of particles of ZhS6U alloy dispersed by electric erosion and obtained by spark plasma sintering have the following characteristics: has fine grain structure in the absence of pores, cracks and other defects; the main elements in the alloys are: С, Аl, W, Cr, Fe, Mo, Ni, Nb, Co и Ti; main phases: Ni, Ni17W3, C5NbTi2 and Al0.9Ni4.22; porosity is 0.18%; average microhardness value is 460 HV0.2.

The work was carried out with the financial support of the grant of President of the Russian Federation (НШ-596.2022.4).

keywords ZhS6U grade alloy waste, electroerosion dispersion, powder, spark plasma sintering, heat-resistant nickel alloy, properties
References

1. Kurikhina Т. V. The Kinetics of Formation of Intermetallic Compound on the Basis of Ni3Al in Heat-Resistant Nickel Alloys ZhС6U. Tekhnologiya Mashinostroeniya. 2017. No. 1. pp. 5–8.
2. Eryomin E. N., Filippov Yu. O., Davletkildeev N. A., Minnekhanov G. N. The analysis of structure of alloy ZhS6U by atomic force microscopy method. Omsk Scientific Bulletin. 2011. Vol. 97, Iss. 1. pp. 24–29.
3. Ospennikova O. G., Orlov M. R. Improvement in Properties of High-Temperature Alloy of ЖС6У-ВИ Grade by Means of hot Isostatic Pressing and the Following Heat Treatment. Materialovedenie. 2007. Iss. 9. pp. 32–37.
4. Bykov Yu. G., Logunov A. V., Razumovsky I. M., Frolov V. S. The Change in the Density of Alloy ZhS6U in the Process of Operation. Metallovedeniye i Termicheskaya Obrabotka Metallov. 2007. No. 7. pp. 29–32.
5. Novikova O. V., Kochetkov V. A., Vinogradov A. I., Zhukov A. A., Tikhonov A. A., Marinin S. F. The Use of Gas-Static Pressing to Improve the Operational Reliability of Turbine Blades Made of Heat-Resistant Alloy Type ZHS6U. Zagotovitelnye Proizvodstva v Mashinostroenii. 2007. No. 8. pp. 54–56.
6. Samoilenko V. M., Ravilov R. G., Drewniak V. V., Petrova M. A., Sagatiba Mehdi. The Method of Estimating the Durability of the Coating on the Turbine Blades from Alloys ISO and ISSN. Civil Aviation High Technologies. 2015. Vol. 222. pp. 201–206.
7. Dobrynin D. A., Alekseeva M. S., Afanasiev-Khodykin A. N. Repair of nozzle blades made of heat-resistant nickel alloy ZhS6U. Proceedings of VIAM. 2021. No. 5. pp. 3–13.
8. Mikhailenko S. V., Nastol’naya V. V., Borodikhin A. S., Golub R. S. Study of the Performance of Processing Heat-Resistant Steel ZHS6U Ceramic plates. Aktualnye Nauchnye Issledovaniya v Sovremennom Mire. 2020. № 12-1. pp. 128–131.
9. Ageev E. V., Ageev E. V. Composition, Structure and Properties of Hard Alloy Products from Electroerosive Powders Obtained from T5K10 Hard Alloy Waste in Kerosene. Non-ferrous Мetals. 2022. No. 2. рр. 48–52.
10. Ageev E.V., Ageevа E.V., Khardikov S. V. Structure and Properties of Sintered Corrosion-Resistant Steel Manufactured from Electroerosive Powders. CIS Iron and Steel Review. 2021. Vol. 22. pp. 88–91.
11. Ageev E. V., Ageevа E. V., Altukhov A. Yu. Structure and Properties of Additive Products Manufactured from Electroerosion Powders. CIS Iron and Steel Review. 2022. Vol. 23. pp. 92–97.
12. Ageev E. V., Ageeva A. E. Composition, Structure and Properties of Hard-Alloy Powders Obtained by Electrodispersion of T5K10 alloy in Water. Metallurgist. 2022. Vol. 66, Iss. 1-2. pp. 146–154.
13. Pristinskii Y. O., Peretyagin N. Yu., Kuznetsova E. V., Peretyagin P. Yu. Mechanical Properties of Hard WC–Co Alloys Produced Traditionally and by Spark Plasma Sintering. Russian Engineering Research. 2019. Vol. 39, Iss. 12. pp. 1029–1033.
14. Yurlova M. S., Demenyuk V. D., Lebedeva L. Y., Dudina D. V., Grigoryev E. G., Olevsky E. A. Electric Pulse Consolidation: an Alternative to Spark Plasma Sintering. Journal of Materials Science. 2014. Vol. 49, Iss. 3. pp. 952–985.
15. Hulbert D. M., Lavernia E. J., Mukherjee A. K., Anders A., Andersson J. A Discussion on the Absence of Plasma in Spark Plasma Sintering. Scripta Materialia. 2009. Vol. 60., Iss. 10. pp. 835–838.

Full content Composition, structure, and properties of heat-resistant alloys samples made from powders obtained by electroerosion of waste nickel alloys in kerosene
Back