Журналы →  Obogashchenie Rud →  2023 →  №2 →  Назад

Название On the assessment of energy consumption when splitting rock fragments
DOI 10.17580/or.2023.02.01
Автор Bolobov V. I., Plashchinsky V. A.
Информация об авторе

St. Petersburg Mining University (St. Petersburg, Russia):

Bolobov V. I., Professor, Doctor of Engineering Sciences, Senior Researcher, boloboff@mail.ru
Plashchinsky V. A., Assistant, Candidate of Engineering Sciences, SlavaPlash@yandex.ru


Energy consumption for rock fracturing is one of the key indicators used for assessing the overall mining efficiency. It is, therefore, critical to develop methods aimed to ensure the proper measurement accuracy for this value. In the current research, the energy consumed for rock fracturing, regardless of the method, is generally viewed as a function of the linear size of the sample, its cross-sectional area, or its volume. There is, however, no single substantiated approach to what indicators should be used for various fracturing methods, including when splitting large rock fragments. A clarification for this issue is, therefore, quite relevant. This paper presents the methodology and experimental results for the splitting of sandstone in the form of cube-shaped samples and plates. It has been established that no satisfactory convergence is observed when the splitting energy is regarded as a function of the splitting surface area or the sample volume: respective energy consumption ratios for the cubic form and plates are widely scattered (between the factors of 2 and 240). By contrast, the ratio of the energy to the thickness of the sample being fractured takes on an almost constant value. It has been experimentally confirmed that the use of a composite impact tool with extended impact times reduces energy consumption in rock fracturing, which is also consistent with the statements of V. B. Sokolinsky on the preconditions for the splitting process.

Ключевые слова Sandstone splitting, energy consumption for rock fracturing, quasi-static loading, impact, contact fracturing, splitting
Библиографический список

1. Vetrov Yu. A. Cutting of soils with earth-moving machines. Moscow: Mashinostroyenie, 1971. 360 p.
2. Baron L. I., Khmelkovsky I. E. Destructibility of rocks by free impact. Moscow: Nedra, 1971. 201 p.
3. Pristash V. V., Chirkov S. E. Energy intensity of rock destruction under various types of mechanical impacts. Gorny Informatsionno-analiticheskiy Byulleten'. 2000. No. 10. pp. 85–87.
4. Ushakov L. S., Kotylev Yu. E., Kravchenko V. A. Hydraulic impact machines. Moscow: Mashinostroyenie, 2000.
416 p.
5. Xue Y., Dai B., Chen Y., Zhang L., He G., Zhang Z. Experimental study on the mechanical properties and damage evolution of hollow cylindrical granite specimens subjected to cyclic coupled static-dynamic loads. Geofluids. 2020. Vol. 2020. 14 p. DOI: 10.1155/2020/8881936

6. Pavlovich A. A., Korshunov V. A., Bazhukov A. A., Melnikov N. Y. Estimation of rock mass strength in open-pit mining. Zapiski Gornogo Instituta. 2019. Vol. 239. pp. 502–509.
7. Khoreshok A., Mametiev L., Tsekhin A., Borisov A. Relationship between the power of the two-bit cutting body
rotation drive of the roadheader and hardness of broken rock. E3S Web of Conferences. 2018. No. 41. DOI: 10.1051/e3sconf/20184103017
8. Gabov V. V., Xuan N. V., Zadkov D. A., Tho T. D. Increasing the content of coarse fractions in the mined coal mass by a combine using paired cuts. Zapiski Gornogo Instituta. 2022. Vol. 257. pp. 764–770.
9. Khokhlov S. V., Vinogradov Yu. I., Noskov A. P., Bazhenova A. V. Predicting displacements of ore body boundaries in generation of blasted rock pile. Gorny Informatsionno-analiticheskiy Byulleten'. 2023. No. 3. pp. 40–56.
10. Shreiner L. A., Petrova O. P. Zones of plastic deformation and the mechanism of destruction of plastic rocks during indentation. Problems of deformation and destruction of rocks during drilling. Мoscow: GOSINTI, 1961.
11. Jiang H., Cai Z., Wang O., Meng D. Experimental and numerical investigation of hard rock breakage by indenter impact. Shock and Vibration. 2020. 12 p. DOI: 10.1155/2020/2747830

12. Shishlyannikov D. I., Zvonarev I. E. Investigation of the destruction process of potash ore with a single cutter using promising cross cutting pattern. Applied Sciences. 2021. Vol. 11, Iss. 1. DOI: 10.3390/app11010464
13. Pankratenko A. N. Determination of the specific surface energy of rock destruction. Gorny Informatsionno-analiticheskiy Byulleten'. 2002. No. 9. pp. 11–14.
14. Pashkov D. A. Review of methods for determining the energy intensity of rock destruction. Young Russia: Collection of materials of the XI All-Russian scientific and practical conference with international participation, Kemerovo, April 16–19 2019. Kemerovo: KuzSTU, 2019. pp. 10310.1–10310.4.
15. Hoyoung J., Jeon S. Characteristic of size distribution rock chip produced by rock cutting with a pick cutter. Geomechanics and Engineering. 2018. Vol. 15, No. 3. pp. 811–822.
16. Sudarikov S. M., Yungmeister D. A., Korolev R. I., Petrov V. A. On the possibility of reducing man-made burden on benthic biotic communities when mining solid minerals using technical means of various designs. Zapiski Gornogo Instituta. 2022. Vol. 253. pp. 82–96.
17. Yungmeyster D. A., Isaev A. I., Gasymov E. E. Substantiation of dth air drill hammer parameters for penetration rate adjustment using air flow. Gornyi Zhurnal. 2022. No. 7. pp. 72–77. DOI: 10.17580/gzh.2022.07.12
18. Teplyakova A. V., Azimov A. M., Alieva L., Zhukov I. A. Improvement of manufacturability and endurance of percussion drill assemblies: Review and analysis of engineering solutions. Gorny Informatsionno-analiticheskiy Byulleten'. 2022. No. 9. pp. 120–132.
19. Linh N. K., Gabov V. V., Lykov Y. V., Urazbakhtin R. Y. Evaluating the efficiency of coal loading process by simulating the process of loading onto the face conveyor with a shearer with an additional share. International Journal of Engineering. 2021. Vol. 34, Iss. 7. pp. 1804–1809.
20. Gabov V. V., Zadkov D. A., Nguyen K. L. Features of elementary burst formation during cutting coals and isotropic materials with reference cutting tool of mining machines. Zapiski Gornogo Instituta. 2019. Vol. 236. pp. 153–160.
21. Timofeev E. G, Teplyakova A. V., Zhukov I. A., Golikov N. S. Automated method of designing anvil-blocks of impact machines based on the physical and mechanical properties of destroyed objects. Gorny Informatsionno-analiticheskiy Byulleten'. 2022. No. 12–2. pp. 259–271.
22. Yang R., Li W., Yue Z. Comparative study on dynamic mechanical properties and energy dissipation of rocks under impact loads. Shock and Vibration. 2020. Vol. 2020. 15 p. DOI: 10.1155/2020/8865099

23. Prokopenko S. A., Cehlar M. Improving efficiency of rock destruction through twinned operation of various bit cutters. Ugol'. 2018. No. 11. pp. 24–27.
24. Prokopenko S. A., Vorobiev A. V. Recovery of wornout picks in rock breaking. Eurasian Mining. 2018. No. 1. pp. 27–30. DOI: 10.17580/em.2018.01.06
25. Bolobov V. I., Chupin S. A., Akhmerov E. V., Plaschinskiy V. A. Comparative wear resistance of existing and prospective materials of fast-wearing elements of mining equipment. Materials Science Forum. 2021. Vol. 1040. pp. 117–123.
26. Teplyakova A. V., Zhukov I. A., Martyushev N. V. Application of drilling machines with impact cam mechanism in various mining and geological conditions. Ustoychivoye Razvitie Gornykh Territoriy. 2022. Vol. 14, No. 3. pp. 501–511.
27. Bolobov V. I., Plashchinsky V. A. Influence of impact duration on fracture efficiency in rocks and on plastic deformation of metals. Gorny Informatsionno-analiticheskiy Byulleten'. 2022. No. 3. pp. 78–96.
28. Sokolinsky V. B. Impact destruction machines. Moscow: Mashinostroyenie, 1982. 151 p.
29. Bolobov V. I., Plashchinsky V. A., Borisov S. V., Le-Thanh B. On the ratio of rock fracture parameters in static and dynamic conditions. Obogashchenie Rud. 2021. No. 5. pp. 3–9. DOI: 10.17580/or.2021.05.01

Language of full-text русский
Полный текст статьи Получить