Журналы →  Chernye Metally →  2023 →  №4 →  Назад

Preparation of Raw Materials
Название Regularities of drying hot briquetted iron
DOI 10.17580/chm.2023.04.01
Автор I. S. Vokhmyakova, I. S. Bersenev, O. G. Sivkov, A. A. Stepanova
Информация об авторе

TOREKS Research and Production Innovative Enterprise, Ekaterinburg, Russia:

I. S. Vokhmyakova, Cand. Eng., Head of Metallization and Advanced Technologies Group
I. S. Bersenev, Cand. Eng., Head of the Scientific and Analytical Department, e-mail: i.bersenev@torex-npvp.ru

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:

O. G. Sivkov, Postgraduate Student
A. A. Stepanova, Postgraduate Student


Hot-briquetted iron (HBI) is a product with a low carbon footprint, therefore its use in metallurgy is expected to increase. The use of HBI in steelmaking as part of a solid feed places limitations on its moisture content, both when used in an electric arc furnace and when it is loaded into a converter. Depending on the production conditions, storage and transportation, HBI can have a moisture content in the range of 1 to 5.5 %. Moisture content of more than 1.5 % creates a hazardous condition when feeding HBI into a steelmaking unit. In addition, drying of HBI can be an effective way of reducing its secondary oxidation and improving its transport properties. An understanding of the HBI drying kinetics will therefore make it possible to reasonably formulate requirements for its handling in metallurgical plants and, if necessary, define drying conditions. The main purpose of the paper is to investigate the HBI drying process and to define the rational conditions for this process in the industry. Physical modelling was adopted as the research methodology. The research revealed that HBI drying is possible both with the use of a drying unit and by evaporation of moisture in natural conditions. The rate of forced drying is 2 orders of magnitude higher. The optimum drying conditions have also been determined: heat medium temperature of 170–180 °C; drying time: 30 minutes for each 1% moisture; the heat medium flow rate for drying shall be 413 m3/t; the natural gas flow rate for drying shall be 2.92 m3/t. The implementation of this technical solution is possible both for enterprises producing HBI and for direct consumers – steel producers. Design and development work is currently underway to implement this technology.

Ключевые слова Moisture, drying, drying unit, metal feed, hot-briquetted iron, moisture, heat medium, physical simulation, drying rate, carbon footprint
Библиографический список

1. Bersenev I. S., Bragin V. V., Solodukhin А. А. et al. Current issues of agglomeration of iron ore raw materials. Metallurgy: technologies, innovations, quality: proceedings of the XXII International Scientific and Practical Conference: in 2 parts. Part 1. Novokuznetsk: Izd. tsentr SibGIU, 2021. pp. 32–37.
2. Nedelin S. V. Prospects for the development of ferrous metallurgy, taking into account environmental restrictions. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2021. Vol. 77. No. 8. pp. 936–942.
3. Korostelev А. А., Semin А. Е., Kotelnikov G. I., Emelyanov V. V., Murzin I. S. Usage of hotbriquetted iron for steel making in an electric arc furnaces. Chernye Metally. 2018. No. 3. pp. 18–23.
4. Alabushev Е. А., Bersenev I. S., Bragin V. V. et al. Assessing the risks of using hydrogen to replace carbon-containing fuels in ferrous metallurgy. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2021. Vol. 77. No. 8. pp. 925–930.
5. Romanova О. А., Sirotin D. V. Strategic vector for the development of Russian metallurgy in the new reality. Izvestiya UGGU. 2022. Iss. 3 (67). pp. 133–145.
6. Shevelev L. N., Brodov А. А. Energy saving, increasing energy efficiency and reducing greenhouse gas emissions in the Russian ferrous metallurgy. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2018. No. 2. pp. 3–6.
7. PyeDan S., Welsby W., Mc Dowall T. et al. Regional uptake of direct reduction iron production using hydrogen under climate policy. Energy and Climate Change. 2022. Vol. 3, Iss. 3. pp. 1–18.
8. Wanho Kim, Il Sohn. Critical challenges facing low carbon steelmaking technology using hydrogen direct reduced iron. Joule. 2022. Vol. 6, Iss. 10. pp. 2228–2232.
9. Weigel M., Fischedick M., Marzinkowski J., Winzer P. Multicriteria analysis of primary steelmaking technologies. Journal of Cleaner Production. 2016. Vol. 112. pp. 1064–1076.
10. Zhuravlev S. G., Klyuchnikov A. E., Popovich V. N. et al. Steel production method. Patent RF No. 2699468. Applied: 2018.12.19. Published: 2019.09.05.
11. Graupnera Y., Weckenborga Ch., Spenglera T. S. Designing the technological transformation toward sustainable steelmaking: A framework to provide decision support to industrial practitioners. Procedia CIRP. 2022. Vol. 105. pp. 706–711.
12. Timofeeva А. S., Kozhukhov А. А., Nikitchenko Т. V. et al. Influence of ambient humidity on the secondary oxidation of hot briquetted iron. Stal. 2022. No. 12. pp. 2–5.
13. Vokhmyakova I. S., Bersenev I. S., Borodin А. V. et al. The mechanism of oxidation of hot briquetted iron (HBI). Stal. 2022. No. 3. pp. 2–6.

Language of full-text русский
Полный текст статьи Получить