Журналы →  Eurasian Mining →  2022 →  №2 →  Назад

PROCESSING AND COMPLEX USAGE OF MINERAL RAW MATERIALS
Название Technology for processing quartz–sericite ore by selective grinding and flotation
DOI 10.17580/em.2022.02.11
Автор Yushina T. I., Nguyen Van Trong, Dumov A. M., Nguyen Thu Thuy
Информация об авторе

National University of Science and Technology—NUST MISIS, Moscow, Russia:

Yushina T. I., Head of Department, Associate Professor, Candidate of Engineering Sciences, yushina.ti@misis.ru
Nguyen Van Trong, Trainee
Dumov A. M., Associate Professor, Candidate of Engineering Sciences
Nguyen Thu Thuy, Trainee

Реферат

Sericite, an aluminosilicate group mineral, has a considerable economic value as it is used in many branches of industry, including the cosmetic industry, paint-and-varnish industry and in production of polymers. Vietnam possesses explored deposits holding commercial reserves of quartz–sericite ore. Producibility of marketable sericite concentrate was tested using quartz–sericite ore samples from the Ha Tinh Province. The data on the material constitution of the test ore from the X-ray structural analysis, optical studies and electron microscopy allowed offering a supposition on the feasible effective processing of the test ore by selective grinding and classification in hydraulic cyclones, which was experimentally proved. An essential loss of sericite in tailings required studying additional recovery of sericite by other methods. The studies into properties of cationic collector ArmacT by the Fourier Transform Infrared Spectroscopy (FTIR) to determine the nature of chemical bonds in molecules, as well as the adsorption tests of this collector at sericite and quartz in different operating conditions confirmed applicability of this agent to extract sericite from middlings (tailings of gravity concentration) and enabled flotation optimization. Based on the implemented studies and experimental processing of the test ore using selective grinding, classification in cyclones and flotation, the flow chart was developed for processing initial ore with the total mass fraction of SiO2 74.48%, Al2O3 16.20%, K2O 3.52%, Na2O 0.59% with production of sericite concentrate with the average particle size of 10 μm and mass fractions of SiO2 49.33%; Al2O3 34.56%; (K2O+Na2O) 9.12%. This product meets the quality standards imposed on the raw stock for various industries.

Ключевые слова Quartz–sericite ore, material constitution, sericite, quartz, selective grinding, classification, flotation, cationic collectors, adsorption, concentrates
Библиографический список

1. Pushcharovskii D. Yu. Structural Mineralogy of Silicates and Their Synthetic Analogs. Moscow : Nedra, 1986. 159 p.
2. Russian Geological Encyclopedia. 3 Volumes. Vol. 3 (R–Ya). Moscow–Saint-Petersburg : VSEGEI, 2012. 519 p.
3. Godovikov A. A. Mineralogy. 2nd Edition, Revised and Enlarged. Moscow : Nedra, 1983. 647 p.
4. Hedrick J. B., Mica. 2006 Minerals Yearbook. U.S. Geological Survey, USA. 2007. Available at: https://docplayer.net/7029489-2006-mineralsyearbook.html (accessed: 19.10.2022).
5. Sericit Mica Powder, Shijiazhuang Dahua Imp. & Exp. Trade Co., Ltd. Available at: https://russian.alibaba.com/Popular/CN_sericite-mica-manufacturers-Trade.html (accessed: 19.10.2022).
6. Nguyen Thi Thanh Thao. Characteristics of sericite ore etching in the formations of eruption of Dong Trau Formation in Ha Tinh Region and usability. Mine geological college Hanoi, 2017.
7. Tran Trong Hue, Kieu Quy Nam. Sericite Mineralization in Vietnam and its Economic Significance. Institute of Geology, VAST, Hoang Quoc Viet, Cau Giay, Hanoi, 2006.
8. Yushina T. I., Dumov A. M., Nguyen Van Trong, Nguyen Thu Thuy. Mineral composition and commercial application feasibility of sericite ore in Ha Tinh Province. Eurasian Mining. No. 2. 2020. pp. 32–38. DOI: 10.17580/em.2020.02.08
9. Yushina T. I., Nguyen Van Trong, Dumov A. M., Nguyen Thu Thuy. A study on the possibility of processing quartz-sericite ore of the Ha Tinh deposit in Vietnam. Obogashchenie Rud. 2022. No. 1. pp. 8–13. DOI: 10.17580/or.2022.01.02
10. Arsentiev V. A., Gerasimov A. M., Ustinov I. D. Resource-saving in processing of phyllosilicate minerals Gornyi Zhurnal. 2018. No. 12. pp. 52–58. DOI: 10.17580/gzh.2018.12.11
11. Ossa-Moreno J., McIntyre N., Ali S. et al. The hydro-economics of mining. Ecological Economics. 2018. Vol. 145. pp. 368–379.
12. Nguyen M. T., Vink S., Ziemski M., Barrett D. J. Water and energy synergy and trade-off potentials in mine water management. Journal of Cleaner Production. 2014. Vol. 84, No. 1. pp. 629–638.
13. Hongqaing L. I., Leming O. U., Feng Q., Chang Z. Recovery mechanisms of sericite in microcrystalline graphite flotation. Physicochemical Problems of Mineral Processing. 2015. Vol. 51, Iss. 2. pp. 387–400.
14. Vaisberg L. A., Ustinov I. D. Introduction to the Technology of Separation of Minerals. Saint-Petersburg : Russkaya kollektsiya, 2019. 168 p.
15. Abramov A. A. Collected Edition. Vol. 7 : Flotation. Collecting Reagents : Tutorial. Moscow : Gornaya kniga, 2012. 656 p.
16. ArmacT, Product Line Surfactants – Cationic and fatty amines. Available at: https://www.nouryon.com/product/armac-t/ (accessed: 19.10.2022).
17. FTIR Spectroscopy – Fundamental Theory and Applications. Available at: https://jascoinc.com/learning-center/theory/spectroscopy/fundamentalsftir-spectroscopy/ (accessed: 19.10.2022).
18. Nakamoto K. Infrared and Rama Spectra of Inorganic and Coordination Compounds. Moscow : Mir, 1991. 536 p.
19. Kazitsina L. A., Kupletskaya N. B. Application of UV, IR and NMR Spectroscopy in Organic Chemistry. Moscow : Vyscshaya shkola, 1971. 264 p.

Полный текст статьи Technology for processing quartz–sericite ore by selective grinding and flotation
Назад