Журналы →  Obogashchenie Rud →  2022 →  №4 →  Назад

Название Aspects of import substitution in the mining and processing industry
DOI 10.17580/or.2022.04.06
Автор Paikov A. A., Paikova V. A.
Информация об авторе

Research and Engineering Corporation «Mekhanobr-Tekhnika» (St. Petersburg, Russia):
Paikov A. A., Chief Specialist, paykov_aa@mtspb.com
Paikova V. A., Deputy General Director, sales@mtspb.com


There are at least two aspects to the import substitution policy in mining and processing and related industries. One is related to the forced restriction of international competition, the growing share of imperfect competition, costs in the form of lower overall product quality, higher prices, and potentially higher corruption. The other implies wider possibilities for domestic equipment and technology designers and suppliers, ensuring independence and stability in the basic sectors of the economy. The possible import substitution mechanisms include:
— direct import substitution with products designed and manufactured domestically;
— joint manufacture with high localization (70–80 %);
— parallel import through alternative suppliers;
— reorientation to alternative suppliers.
According to expert assessments, rapid import substitution is deemed impossible only for a few critical groups of equipment, including high-power electric motors, ore mills of the largest standard sizes, and high-pressure grinding rolls. The supply of these machines for new or reconstructed processing plants seems highly problematic. As regards the above-mentioned mills, this type of equipment has a very long life cycle and mainly requires the supply of replacement parts. In general, Russian manufacturers are able to reliably cover the demand for all basic mineral processing equipment, with the exception of three or four types of custom high-performance solutions. In the field of laboratory equipment for mineral raw materials, domestic enterprises supply all types of equipment required by the industry.
The study was carried out under the grant issued by the Russian Science Foundation (project No. 20-79-10125).

Ключевые слова Import substitution, ore processing, processing equipment, laboratory equipment, investment efficiency
Библиографический список

1. Gorodov O. A., Petrov A. V., Shmigelskaya N. A. Unfair competition. Moscow: Yustitsinform, 2020. 323 p.
2. Porter M. Competitive strategy: Methods of analyzing industries and competitors. Moscow: Alpina, 2016. 516 p.
3. Vaisberg L. A., Ustinov I. D. Introduction to the technology of mineral separation. St. Petersburg: Russkaya Kollektsiya, 2019. 168 p.
4. Boothroyd G., Dewhurst P., Knight W. Product design for manufacture and assembly. 3ed. Boca Raton (Florida): CRC Press, 2010. 712 p.
5. Nabatnikov Yu. F., Mnatsakanyan V. U. Modern principles of the organization of technical preparation of mining machines production. Gorny Informatsionno-analiticheskiy Byulleten'. 2017. No. S1. pp. 307–317.
6. Dmitrakova U. V., Kruglov A. V., Chylbak-ool E. D., Yushina T. I. Filtering equipment application practice at Russian enterprises. Obogashchenie Rud. 2021. No. 4. pp. 52–56. DOI: 10.17580/or.2021.04.09
7. Belov A. S., Shenderovich E. M. Design cases for Russia’s largest mining and processing enterprises for copper ores. Obogashchenie Rud. 2021. No. 6. pp. 48–52. DOI: 10.17580/or.2021.06.08.
8. The world сopper factbook 2021. Lisbon (Portugal): International Copper Stady Group (ICSG), 2021. 68 p.
9. Baranov V. F. Designs of new operating copper processing plants: process types, equipment selection, industry
trends. Obogashchenie Rud. 2021. No. 1. pp. 43–47. DOI: 10.17580/or.2021.01.08.
10. Sayyad Zahid Qamar. Extrusion of metals, polymers and food products. London: IntechOpen, 2018. 206 p.
11. Boyko P. F., Titievsky E. M., Timiryazev V. A. Process features of operation, repair, reconditioning and modernization of cone crushers of high unit capacity. Gornyi Zhurnal. 2017. No. 4. pp. 71–74. DOI: 10.17580/gzh.2017.04.14
12. Magerstaedt M., Raeth T., Lai L., Plourde D. Ten fold life extension of hydrotransport and tailings lines by internal coating. Corrosion: Proc. of conference. 2016, 6–10 March, Vancouver (Canada). Vol. 6. pp. 4919–4933.
13. Kibirev V. I., Dedushenko I. A., Avksentyev S. Yu., Aleksandrov V. I. Energy efficiency of application of pipes with polyurethane coating. Obogashchenie Rud. 2017. No. 2. pp. 54–59. DOI: 10.17580/or.2017.02.10
14. Riera B., Vigaario B. Virtual systems to train and assist control applications in future factories. IFAC Proceedings Volumes. 2013. Vol. 46, Iss. 15. pp. 76–81.
15. Economic background of industrial modernization and technological development. Strategic management and business planning. Moscow: Unido Project, 2014. 57 p.
16. Political economy. Ed. D. V. Valovoy. Moscow: Alistorus, 2017. 480 p.
17. New laboratory equipment for the study of natural and technogenic raw materials. Zolotodobyvayushchaya Promyshlennost'. 2019. No. 2. pp. 22–24.
18. Ustinov I. D. Resource-saving technologies for extracting precious metals. Zoloto i Tekhnologii. 2020. No. 2. pp. 150–151.

Language of full-text русский
Полный текст статьи Получить