Журналы →  Chernye Metally →  2022 →  №7 →  Назад

20 years of the Vyksa branch of NUST MISIS
Название Study of the expansion process taking into account the contact interaction of the deforming tool and pipe
DOI 10.17580/chm.2022.07.07
Автор M. A. Tovmasyan, S. V. Samusev, N. V. Kholodova, I. V. Myalkin
Информация об авторе

Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia:

M. A. Tovmasyan, Senior Lecturer, Dept. of Technologies and Equipment for Metal Forming, e-mail: i-margarit@yandex.ru
N. V. Kholodova, Senior Lecturer, Dept. of Technologies and Equipment for Metal Forming
I. V. Myalkin, Cand. Eng., Associate Prof., Dept. of Electrometallurgy

National University of Science and Technology “MISIS”, Moscow, Russia:

S. V. Samusev, Dr. Eng., Prof., Dept. of Metal Forming


The elements of the press expander head and the process of pipes expansion are described. The requirements for pipes before and after expansion in accordance with the standards are given. The methods of research on the section of the hydromechanical expander of the J-C-O-E (TESA) 1420 line are presented. Mathematical modeling is carried out in the DEFORM software package, taking into account prehistory loading. On the basis of the experimental study and numerical analysis, the reasons for the occurrence of deviations from roundness, excess of ovality and the perimeter of pipes before and after expansion are determined. The nature of the distribution of stresses and deformations in the process of eliminating ovality in the contact and non-contact sections of pipes and press expander tools are determined. The most loaded areas during the expansion of thick-walled and thin-walled pipes are revealed, and a method for calculating the deformation force is proposed, taking into account the initial curvature of the deformable shell. A method for expanding pipes is presented, taking into account the uneven distribution of mechanical properties and deviation in geometric parameters, perimeter and length of the pipe.

Ключевые слова Large-diameter electric-welded pipes, expansion, mathematical modeling, residual stress, deformation force, ovality, rotation angle, displacement, segments
Библиографический список

1. Kolikov А. P., Romantsev B. A., Aleshchenko A. S. Metal forming. Theory of pipe production processes. Moscow: NITU «MISiS», 2019. 502 p.
2. API Spec. 5L. Technical specifications for pipelines. Introduced: 01.10.2008. Washingtom: API Publishing Services, 2007.
3. GOST 10706–76. Electrically welded steel line-weld tubes. Technical requirements. Introduced: 01.01.1978. Moscow: Izdatelstvo standartov, 1976.
4. GOST R ISO 3183–2015. Steel pipes for pipelines of petroleum and natural gas industries. General specifications. Introduced: 01.06.2016. Moscow: Izdatelstvo standartov, 2016.
5. GOST 20295–85. Steel welded pipes for main gas-and-oil pipelines. Specifications. Introduced: 01.01.1987. Moscow: Izdatelstvo standartov, 1985.
6. Technical Specification 1381-012-05757848–2005. Technological instruction. Longitudinal electric-welded pipes with a diameter of 508–1422 mm for main pipelines for operating pressures up to 9.8 MPa. Introduced: 01.06.2005.
7. OTG-23.040.00-KTN-051-11. Oil pipeline pipes of large diameter. General technical requirements. Introduced: 01.01.2012.
8. GOST 26877–2008. Metal products. Methods of measuring form variations. Introduced: 01.09.2013. Moscow: Standartinform, 2013.
9. Boklag N. Yu., Chechulin Yu. B., Pesin Yu. V., Kugaevskiy S. S. Method for determining the springback and geometric parameters in the pre-forming of large-diameter pipe blanks on presses. Sovremennye problemy nauki i obrazovaniya. 2014. No. 2. pp. 1–8.
10. Zankovets P. V. The degree of influence of preparation and assembly for welding on the quality of welded joints of technological pipelines. Avtomaticheskaya svarka. 2011. No. 6. pp. 48–53.
11. Arakawa T., Nishimura K., Yano K., Suzuki N. Development of high performance UOE pipefor linepipe. JFE Technical Report. 2013. No. 18. pp. 23–35.
12. Jai Dev Chandel, Nand Lal Singh. Formation of X-120 M line pipe through J-C-O-E Technique. Engineering. 2011. No. 3. pp. 400–410.
13. Nóbrega J., Diniz D., Silva A. Numerical evaluation of temperature field and residual stresses in an API 5L X80 steel welded joint using the finite element method. Metals. 2016. Vol. 6, Iss. 28.
14. Fan Lifeng, Gao Ying, Li Qiang, Xu Hongshen. Quality control on crimping of large diameter welding pipe. Chinese Journal of Mechanical Engineering. 2012. Vol. 25, Iss. 6. pp. 1264–1273.
15. Tovmasyan M. A., Samusev S. V. Effect of the nonuniform distribution of the mechanical properties of rolled sheets on the shape of a round billet after forming in making largediameter pipes. Metally. 2020. No. 5. pp. 589–596.
16. Tovmasyan М. А., Samusev S. V. Experimental study of the change in ovality of large-diameter pipes taking into account the welding deformations effect. Chernye Metally. 2019. No. 9. pp. 43–48.
17. Mcrea D., Macre T., Cuida O. Stresses supported by the pipe wall during the expanding process. Metallurgy and new materials researches. 2009. Vol. 17. No. 4. pp. 9–18.
18. Shinkin V. N., Kolikov А. P., Mokrousov V. I. Calculation of maximum stresses in the pipe wall during expansion, taking into account the residual stresses of the shell after the SMS MEER pipe forming press. Proizvodstvo prokata. 2012. No. 7. pp. 25–29.
19. Kolikov А. P., Zvonarev D. Yu., Galimov M. R. Assessment of the stress-strain state of metal based on mathematical modeling in the production of large-diameter pipes. Izvestiya vysshikh uchebnykh zavedeniy. Chernaya metallurgiya. 2017. Vol. 60, No.9. pp. 706–712.
20. Horie M., Miwa T., Tamura Yu., Miyake M. Matrix and method of making steel pipe. Patent RF, No. 2729804. Applied: 06.03.2018. Published: 12.08.2020.
21. Tovmasyan M. A., Samusev S. V. Pipe expansion method. Patent RF, No. 2763079. Applied: 03.12.2019. Published: 27.12.2021. Bulleten No. 36.

Language of full-text русский
Полный текст статьи Получить