Журналы →  CIS Iron and Steel Review →  2022 →  №1 →  Назад

Power Engineering
Название Primary diagnosis of energy efficiency in an integrated steel plant, based on intensive energy-saving methodology. Part 2
DOI 10.17580/cisisr.2022.01.20
Автор S. V. Kartavtsev, E. G. Neshporenko, S. V. Matveev
Информация об авторе

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

S. V. Kartavtsev, Dr. Eng., Prof., Dept. of Heat Engineering and Power Engineering Systems, e-mail: kartavzw@mail.ru
E. G. Neshporenko, Cand. Eng., Associate Prof., Head of the Dept. of Heat Engineering and Power Engineering Systems
S. V. Matveev, Engineer, Dept. of Heat Engineering and Power Engineering Systems

Реферат

The energy efficiency of the integrated steel plant is studied basing on the intensive energy conservation methodology. The primary diagnostics of the energy efficiency of the integrated steel plant is carried out. The boundaries of the research object are established from iron ore deposits to finished cold-rolled steel sheet. The thermophysical heat absorption of materials and intermediates within the boundaries of a closed heat engineering complex has been estimated. The energy intensity of the cold-rolled steel sheet within the same boundaries has been calculated. Efficiency of production was estimated by comparing heat consumption and energy intensity. The complete intensive energy conservation reserve in the complex has been determined. Reserve structure is studied and directions of its implementation are discussed. It is shown that the most complete implementation of the energy-saving reserve is possible only with the transition of a new generation of steel engineering and technology.

Ключевые слова Energy efficiency, integrated steel plant, intensive energy saving methodology, graph theory, network flows, heat consumption and energy intensity, primary diagnosis of energy efficiency, energy saving reserve and its structure, directions of technical progress of metallurgical engineering and technology
Библиографический список

1. Kartavtsev S. V., Neshporenko E.G., Matveev S. V. Primary diagnosis of energy efficiency in an integrated steel plant, based on intensive energy-saving methodology. Part 1. CIS Iron and Steel Review. 2021. Vol. 22. pp. 107-110.
2. Real Prospects for Energy Efficiency in the United States. National Academies Press, Washington, DC. 2010.
3. Worrell E., Blinde P., Neelis M., Blomen E., Masanet E. Energy Efficiency Improvement and Cost Saving Opportunities for the U.S. Iron and Steel Industry. Berkeley National Laboratory. October 2010. 160 p.
4. Stubbles J. Energy use in the U.S. Steel Industry: An Historical Perspective And Future Opportunities. Washington, DC. September 2000. 58 p.
5. Mohsen M. S., Akash B. A. Energy Analysis of the Steel Making Industry. International Journal of Energy Research. 1998. Vol. 22. pp. 1049 – 1054.
6. Deshmukh R., Bansode S., Kolgiri S., Hiremath R. Future Technologies for Energy-Efficient Iron and Steel Making Industry. Imperial Journal of Interdisciplinary Research (IJIR). 2017. Vol. 3. Iss. 9.
7. Sultanguzin I. A., Isaev M. V., Kurzanov S. Yu. Optimizing The Production Of Coke, Coal Chemicals, And Steel On The Basis Of Environmental And Energy Criteria. Metallurgist. 2011. Vol. 54. No. 9–10.
8. Voskoboinikov V. G., Kudrin V. A., Yakushev A. M. General metallurgy. M.: Metallurgiya, 1985. 480 p.
9. Benyakovsky M. A. et al. Technology of rolling production: Reference book in 2 volumes. M.: Metallurgy, 1991. 862 p.
10. Kartavzev S. W. Iron ore smelting processes: GAZMELT way to efficiency. METEC Conference on Science and Technology of Ironmaking. Proceedings. – Dusseldorf, 16 – 20 June. 2003. pp. 60 – 61.
11. Kartavtsev S. V. Energy analysis of liquid-phase reduction of iron by natural gas. Steel in Translation. 2004. Vol. 34. No. 7. pp. 15-18.
12. Nikolaev A., Murzaderov A., Kartavtsev S., Neshporenko E. The Development of Energy-Efficient Scheme Roasting Siderite Ores Using a Gas Turbine Generation. Proceedings of the 2016 IEEE North West Russia Section Young Researchers in Electrical and Electronic Engineering Conference (2016 ElConRusNW), February 2-3, 2016, St. Petersburg, Russia. pp. 672–674.
13. De Beer J., Worrell E., Blok K. Future technologies for energyefficient iron and steel making. Annual Review of Energy Environment. 1998. Vol. 23. No. 1. pp. 123–205.
14. Platonov I. V., Kartavtsev S. V. Possibilities of intense resource saving in electric furnace steelmaking. Russian Metallurgy (Metally). 2013. No. 12. pp. 957–959.
15. Kartavtsev S., Nikolaev A., Neshporenko E., Matveev S., Dyomin Yu. Analysis of its Own Energy Independence Electric Steelmaking Process. Proceedings of the 2016 IEEE North West Russia Section Young Researchers in Electrical and Electronic Engineering Conference (2016 ElConRusNW), February 2-3, 2016, St. Petersburg, Russia. 2016. pp. 624 – 626.
16. Kartavtcev S., Matveev S., Neshporenko E. Heat-electrical regeneration way to intensive energy saving in an electric arc furnaces. IOP Conference Series: Earth and Environmental Science. 2018. Vol. 136. No. 1. 012003. DOI: 10.1088/1755-1315/136/1/012003

Полный текст статьи Primary diagnosis of energy efficiency in an integrated steel plant, based on intensive energy-saving methodology. Part 2
Назад