Журналы →  Chernye Metally →  2022 →  №5 →  Назад

Coating and corrosion protection
Название Vegetable-based steel corrosion inhibitors for the protection of oilfield equipment
DOI 10.17580/chm.2022.05.10
Автор D. D. Fazullin, G. V. Mavrin, L. I. Fazullina, I. G. Shaikhiev, N. M. Lyadov
Информация об авторе

Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia:

D. D. Fazullin, Cand. Eng., Associate Professor, e-mail: denr3@yandex.ru
G. V. Mavrin, Cand. Chem., Associate Professor
L. I. Fazullina, Leading Engineer


Kazan National Research Technological University, Kazan, Russia:
I. G. Shaikhiev, Dr. Eng., Professor;


Kazan Zavoisky Physical-Technical Institute, FRC Kazan Scientific Center of the Russian Academy of Sciences, Kazan, Russia1 ; Kazan Federal University, Kazan, Russia2:
N. M. Lyadov, Scientific Researcher1, 2


In this work, steel corrosion inhibitors from vegetable raw materials have been obtained to protect oilfield equipment from the corrosive action of formation waters. Extracts from the bark of "Norway spruce" and "Scots pine" were used as an inhibitor of steel corrosion. The main component of spruce and pine bark extracts with an anti-corrosion effect is tannins - a group of phenolic compounds of plant origin that have tanning properties and are capable of forming compounds with iron that are slightly soluble in water - iron tannates. The content of tannins in the extract from the bark of Norway spruce was 13.4%, in the extract from the bark of pine - 3.3 %. Corrosion tests were carried out in accordance with GOST 9.506-87 and GOST 9.502-82. The degree of protection of steel grade "Steel 20" with the addition of the spruce bark extract was 88.9 %, with the addition of pine bark extract - 74.9 %, at a dosage of 50 g/dm3. Commercial corrosion inhibitors of steel grades SNPKh-1004 and TNKhS-7 at a dosage of 1g/dm3 showed the degree of steel protection up to 92 and 90.3 %, respectively. Corrosion of steel in the formation water of oil of the Devonian sediment develops 1.5 times more intensively than in the model formation water. The best result in terms of the degree of steel protection with the addition of spruce bark extract and pine bark extract with a concentration of 50 g/dm3 was 80.0 % and 41.8 %, respectively. Thus, the corrosion resistance of the metal in accordance with GOST 9.502-82 as a result of the use of spruce bark extract as a corrosion inhibitor in the model formation water corresponds to the "stable" level, in the formation water of oil of the Devonian sediment it corresponds to the "reduced" level.
Electron-microscopic measurements were carried out within the framework of the state task of the Federal Research Center of KazSC RAS No. AAAA-A18-118041760011-2.

Ключевые слова Steel, corrosion, formation water, corrosion inhibitors, spruce bark extract, pine bark extract, tannins
Библиографический список

1. Ryabov V. G., Denisova А. V. Application of corrosion and scaling inhibitors manufactured by FLEK Ltd to protect oilfield equipment. Nauchno-tekhnicheskiy vestnik Povolzhya. 2013. No. 5. pp. 282–287.
2. Ugryumov О. V., Varnavskaya О. А., Khlebnikov V. N., Ivanov V. А., Vasyukov S. I. et. al. Corrosion inhibitors of the SNPKh brand. Inhibitor based on phosphorus-, nitrogen-containing compounds to protect oilfield equipment. Zashchita metallov. 2007. Vol. 47. No. 1. pp. 94–112.
3. Mamedov К. А., Gamidova N. S. The use of a bactericide-inhibitor of complex action for corrosion protection of oilfield equipment and pipelines. Territoriya Neftegaz. 2018. No. 3. pp. 20–25.
4. Sivokon I. S., Andreev N. N. Efficiency of industrially used corrosion inhibitors in the West Siberian region and results of laboratory testing. Korroziya Territorii Neftegaz. 2013. No. 3. pp. 14–18.
5. Fazullin D. D., Mavrin G. V., Shaikhiev I. G. Investigation of the properties and composition of a concentrate of spent «Inkam-1» emulsion as a corrosion inhibitor. Petroleum Chemistry. 2017. Vol. 57. No. 8. pp. 728–733.
6. Fazullin D. D., Musin R. Z., Shaykhiev Т. I., Dryakhlov V. О., Shaykhiev I. G. Investigation of the concentrate from the membrane separation of the spent "Lenol-10 MB" brand coolant as a basis for obtaining an inhibitory composition to reduce the corrosion of formation waters during oil production. Vestnik tekhnologicheskogo universiteta. 2017. Vol. 20. No. 20. pp. 67–71.
7. Fazullin D. D., Mavrin G. V., Shaykhiev I. G. Studies of properties and composition of the concentrate of the spent emulsion "Inkam-1" as a corrosion inhibitor. Neftekhimiya. 2017. Vol. 57. No. 4. pp. 468–473.
8. Fazullin D. D., Mavrin G. V., Shaykhiev I. G. Studies of properties and composition of the concentrate of the spent emulsion "Inkam-1" as a corrosion inhibitor. Vestnik tekhnologicheskogo universiteta. 2015. Vol. 18. No. 15. pp. 69–73.
9. Verma C., Ebenso E. E., Bahadur I., Quraishi M. A. An overview on plant extracts as environmental sustainable and green corrosion inhibitors for metals and alloys in aggressive corrosive media. Journal of Molecular Liquids. 2018. Vol. 266. pp. 577–590.
10. Shang Z., Zhu J. Overview on plant extracts as green corrosion inhibitors in the oil and gas fields. Journal of Materials Research and Technology. 2021. Vol. 15. pp. 5078–5094.
11. Slobodyan Z. V., Mahlatyuk L. А., Kupovych R. B., Khaburskyi Ya. M. Compositions based on the extracts of oak bark and chips as corrosion inhibitors for medium-carbon steels in water. Materials Science. 2015. Vol. 50. P. 687–697.
12. Ali I. H., Idris A. M., Suliman M. H. A. Evaluation of leaf and bark extracts of Acacia tortilis as corrosion inhibitors for mild steel in seawater: experimental and studies. International Journal of Electrochemistry Science. 2019. Vol. 14. pp. 6406–6419.
13. Nnanna L. A., Uchendu K. O., Nwosu F. O., Ihekoronye U., Eti E. P. Gmelina Arborea bark extracts as a corrosion inhibitor for mild steel in an acidic environment. International Journal of Materials and Chemistry. 2014. Vol. 4. No. 2. pp. 34–39.
14. Ivanovskiy V. N. Corrosion of downhole equipment and methods of protection against it. Korroziya Territorii Neftegaz. 2011. No. 3. pp. 18–25.
15. GOST 9.502–82. Inhibitors of metals corrosion for aqueous systems. Methods of corrosion tests. Introduced: 01.01.1984. Moscow: Izdatelstvo standartov, 1982.
16. GOST 9.506–87. Corrosion inhibitors of metals in water-petroleum media. Methods of protective ability evaluation. Introduced: 01.07.1988. Moscow: Izdatelstvo standartov, 1987.
17. GOST 1050–2013. Metal products from nonalloyed structural quality and special steels. Introduced: 01.01.2015. Moscow: Izdatelstvo standartov, 2015.
18. PND F 14.1:2:4.178–02. Quantitative chemical analysis of waters. Moscow: Tsentr ekologicheskogo kontrolya i analiza. 2002. 29 p.
19. GOST 18995.1–73. Liquid chemical products. Methods for determination of density. Introduced: 08.07.1974. Moscow: Izdatelstvo standartov, 1973.
20. GOST 19885–74. Tea. Methods for determination of tannin and caffeine content. Introduced: 01.07.1975. Moscow: Izdatelstvo standartov, 1975.

Language of full-text русский
Полный текст статьи Получить