Журналы →  Tsvetnye Metally →  2022 →  №3 →  Назад

Название Magnetic Separation as Part of New Nickel Concentrate Processing Technology at Kola MMC: Performance Analysis and Upgrade. Part I
DOI 10.17580/tsm.2022.03.07
Автор Ryabushkin M. I., Romanov A. L., Pakhomov R. A., Tsymbulov L. B.
Информация об авторе

Kola MMC, Monchegorsk, Russia:

M. I. Ryabushkin, First Deputy General Director — Chief Engineer, e-mail: RyabushkinMI1@kolagmk.ru

Gipronikel Institute LLC, Saint Petersburg, Russia:
A. L. Romanov, Principal Specialist at the Laboratory for Geological Studies
R. A. Pakhomov, Senior Researcher at the Pyrometallurgy Laboratory, Candidate of Technical Sciences, e-mail: pakhomovra@nornik.ru
L. B. Tsymbulov, Director of the Research and Development Department, Doctor of Technical Sciences


Kola Mining and Metallurgical Company has recently introduced significant changes into its processing circuits that deal with sulphide nickel concentrates, the product of converter matte separation. They help reduce both losses and operating costs, as well as generate extra revenues due to enhanced product quality. At the same time, the upgrades done to the production equipment and the adoption of electrowinning process for obtaining high-grade nickel cathodes at Norilsk Nickel sites require that the tube kiln nickel powder, which is subjected to chlorine dissolution at Kola MMC’s electrowinning plant, was of particular quality. The key quality requirements concerning the tube kiln nickel powder include the presence of carbon component and slag-forming impurities (SiO2, Al2O3 and others), which impact the performance of the followinghydrom tallurgical process stage, as well as the metal content of the resulting middlings. Due to additional conditions set, concentration techniques should be used to enhance the quality of the middlings. The drawbacks of the existing magnetic separation line, as well as the peculiar behaviour of the raw materials that revealed itself during the start-up, made the line upgrade necessary. This paper examines certain production flowsheets and looks at improving the quality of the final product by separating materials based on their differing magnetic properties.

Ключевые слова Сonverter matte, nickel concentrate, reduction, nickel powder, Kola Mining and Metallurgical Company, tube kilns, magnetic separation
Библиографический список

1. Abramov A. A. Processing, concentration and comprehensive utilization of solid minerals. In 3 volumes. 2nd reprint edition. Moscow : Izdatelstvo Moskovskogo gosudarstvennogo gornogo universiteta, 2004. Vol. 1: Concentration processes and machinery. 70 p.
2. Zorya V. N., Anikin A. E., Volynkina E. P., Fedyakina A. N. Examining the use of magnetic separation to process wastes accumulated in EVRAZ ZSMK’s tailing pond. Waste Management as the Basis for Restoring the Ecological Balance in Russia’s Industrial Regions: 4th international conference. SibGIU, 2012. pp. 190–198.
3. Khudyakov S. G., Melkomukova O. G., Lanovetskiy S. V. Analyzing the applicability of mechanical and magnetic separation techniques for the concentration of titanium industry waste. Molodezhnaya nauka v razvitii regionov. 2018. Vol. 1. pp. 230–234.
4. Zubarev A. I. An experimental study of magnetic induction and prospective use of dry magnetic separation as a concentration technique applicable to granular manganese-carrying wastes. Research papers of Donetsk National Technical University. Series: Mining and Geology. 2014. No. 2(21). pp. 55–59.
5. Shiryaev A. A., Velichko Yu. V., Botvinnikov V. V., Goncharov A. I. Concentration of the Kryvyi Rih waste high-grade oxidized ores by dry magnetic separation. Obogashchenie Rud. 2005. No. 2. pp. 7–10.
6. Chernousenko E. V., Vishnyakova I. N., Kameneva Yu. S., Neradovskiy Yu. N. Analyzing the possibility to recover non-ferrous metals from old copper-nickel ore concentration tailings. Gornyy informatsionno-analiticheskiy byulleten. 2019. No. 7. pp. 196–206.
7. Chernousenko E. V., Mitrofanova G. V., Vishnyakova I. N., Kameneva Yu. S. Flotation and magnetic methods to recover non-ferrous metals from low grade technogenic raw materials. Tsvetnye Metally. 2019. No. 2. pp. 11–16. DOI: 10.17580/tsm.2019.02.02.
8. Boutouchent-Guerfi N., Boussourdi M. A., Lami A. et al. Dry magnetic separation on the recovery of metal fragments from kerf slurry waste produced during the manufacture of photovoltaic solar cells. Silicon. 2021. Vol. 13. pp. 149–153.
9. Lvov V. V., Kuskov V. B. A treatability study of the Bakcharskoye deposit iron ores concentration by means of high-intensity magnetic separation. Obogashchenie Rud. 2015. No. 1. pp. 26–30.
10. Nizov V. A., Bakirov A. R., Mashchenko V. N. Method of dressing oxide nickel ores. Patent RF, No. 2458742. Published: 20.08.2012.
11. Ma N., Houser J. B., Wood L. A. et al. Enhancement of iron recovery from steelmaking slag fines by process optimization of upgrading the slag fines with dry magnetic separation. Journal of Sustainable Metallurgy. 2017. No. 3. pp. 280–288.
12. Gao L., Liu Z., Pan Y. et al. Separation and recovery of iron and nickel from low-grade laterite nickel ore using reduction roasting at rotary kiln followed by magnetic separation technique. Mining, Metallurgy and Exploration. 2019. Vol. 36. pp. 375–384.
13. Wang J., Zu P., Yi S. et al. Preconcentration of iron, rare earth, and fluorite from bayan obo ore using superconducting magnetic separation. Mining, Metallurgy and Exploration. 2021. Vol. 38. pp. 701–712.
14. Yu Xiaoyuan, Fu Yu. Magnetite dry separation belt device. Patent CN212167778 (U). Applied: 2020.12.18.
15. Liu Zhuanqing. Dry-separation magnetic roller ore separation device. Patent CN212143048 (U). Applied: 2020.12.15.
16. Wang Yucheng, Cheng Baojun. Segmented dry magnetic separation device for powdery magnetic materials. Patent CN211838464 (U). Applied: 2020.11.03.
17. Lan Qingsong. Dry magnetic separator. Patent CN211755968 (U). Applied: 2020.10.27.
18. Ryabushkin M. I., Pakhomov R. A., Tsymbulov L. B., Savinova Yu. A. Behaviour of SiO2 during a new process applied to nickel concentrate from matte separation at Kola MMC. Tsvetnye Metally. 2021. No. 12. pp. 14–24. DOI: 10.17580/tsm.2021.12.02.
19. Barskiy L. A., Kozin V. Z. System analysis for minerals processing. Moscow : Nedra, 1978. 486 p.
20. Rubinshteyn Yu. B., Filippov Yu. A. Flotation kinetics. Moscow : Nedra,1980. 375 p.
21. Krishtal M. M., Yasnikov I. S., Polunin V. I., Filatov A. M., Yulianinkov A. G. Scanning electron microscopy and X-ray microanalysis: Examples of practical application. Moscow : Tekhnosfera, 2009. 208 p.
22. Savinova Yu. A., Rumyantsev D. V., Mishina O. Yu., Bannikova S. A. et al. Examining the material composition and morphology of finely dispersed metallurgical dusts by means of scanning electron/ion microscopy and X-ray microanalysis. Proceedings of the 28th Russian Conference on Electron Microscopy, 2020. 5–10 September 2020, Chernogolovka.
23. Savinova Yu. A. Developing a fluidized-bed furnace process for oxidizing roasting of sulphide concentrates of non-ferrous metals : Candidate of technical sciences dissertation : 05.16.02. Saint Petersburg, 2018. 155 p.

Language of full-text русский
Полный текст статьи Получить