Журналы →  Chernye Metally →  2022 →  №1 →  Назад

Foundry production
Название Production of rods for steel and iron casting from mixtures with a binder based on a combination of inorganic salts
DOI 10.17580/chm.2022.01.05
Автор I. O. Leushin, O. S. Koshelev, L. I. Leushina, A. I. Markov
Информация об авторе

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia:
I. O. Leushin, Dr. Eng., Professor, Head of the Dept. of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru
O. S. Koshelev, Dr. Eng., Professor, Dept. of Machine-building Technological Complexes
L. I. Leushina, Cand. Eng., Associate Professor, Dept. of Metallurgical Technologies and Equipment
A. I. Markov, Post graduate Student, Dept. of Metallurgical Technologies and Equipment


Recently, there has been an active search and development of non-scarce and suitable for industrial use inorganic binders that can compete with synthetic resins in the composition of core mixtures in the production of castings, while ensuring comfortable working conditions for the personnel of foundries and reducing harmful emissions during the entire production process. To date, this goal has not yet been achieved and the search has not been completed, so research continues. The work, the results of which are presented by the authors of this article, is one of many ongoing in Russia in the mainstream of the designated topic. The authors decided to assign the role of the binder in the composition of the core mixture to the composition of inorganic salts, one of which is liquid glass - an aqueous solution of sodium or potassium silicates, and the other (others) are simultaneously hydrophilic and highly soluble in water salts of alkali or alkaline earth metals. The work focuses on the group of complex double salts, crystalline hydrates of sulfates of tri- and monovalent metals - the so-called alum, which have the required set of properties, and, in particular, on non-deficient potassium alum, which had previously proven itself well as a technological additive to the liquid glass core mixture. An environmentally friendly, easy-toimplement version of the technology has been proposed, experimentally verified and tested under the conditions of existing production, which provides the curing of the rod by the mechanism of dehydration of the rod mixture by a combination of heat exposure and the imposition of vacuum and the achievement of the required level of operational characteristics. Practical testing has confirmed the effectiveness of the application of the developed technology for the production of castings from iron and steel. Currently, work is underway to expand its application in foundries of Russian enterprises.

Ключевые слова Casting core, core mixture, binder, inorganic salt, technology, environmental safety, casting defects
Библиографический список

1. Illarionov I. Е., Gamov Е. S., Vasin Yu. P., Chernyshevich Е. G. Metal phosphate binders and mixtures: monograph. Cheboksary: Izdatelstvo pri Chuvashskom universitete, 1995. 524 p.
2. Illarionov I. Е. Aфpplication of fabrication technology for metal phosphate binders, core sands and moulding mixtures on their base. Chernye Metally. 2018. No. 4. pp. 13–19.
3. Tkachenko S. S., Krivitskiy V. S., Emelyanov V. О., Martynov К. V. Possibility of using liquid glass molding and core sands in artistic casting. Lityo i metallurgiya. 2017. No. 2 (87). pp. 12–14.
4. Bulitko Е. V. Study of the composition of a cold-hardening mixture based on a phosphate binder. Tekhnologii metallurgii, mashinostroeniya i materialoobrabotki. 2018. No. 17. pp. 65–70.
5. Kolodiy G. А., Tkachenko S. S., Krivitskiy V. S. Prospects for the use of cold-hardening phosphate mixtures. Liteyshchik Rossii. 2004. No. 8. pp. 23–24.
6. Tkachenko S. S., Kolodiy G. А., Znamenskiy L. G., Ermolenko А. А. Cold-hardening mixtures on an inorganic binder: state and development prospects (inorganic versus organic). Lityo i metallurgiya. 2018. No. 2 (91). pp. 16–22.
7. Evstifeev Е. N., Smirnov V. N., Bessarabov V. S., Kotova L. А., Zhuravlev А. V. Environmentally friendly technology for production of cold-hardening phosphate mixtures. Mezhdunarodny zhurnal prikladnykh i fundamentalnykh issledovaniy. 2011. No. 6. pp. 41–43.
8. Dmitriev E. А., Sviridov А. V. Study of properties of molding sands with a binder based on inorganic salts. Uchenye zapiski Komsomolskogo-na-Amure gosudarstvennogo tekhnicheskogo universiteta. 2016. Vol. 1. No. 3 (27). pp. 72–79.
9. Evstigneev А. I., Dmitriev E. А., Saygushkina V. А., Petrov V. V. Sulphate binder core mix. Liteynoe proizvodstvo. 2014. No. 8. pp. 11–12.
10. Foundry binders Cordis (inorganic). Available at: http://ucp-ha.ru/products/neorganicheskiesistemy/neorganicheskie-svyazuyushchie-cordis/ (accessed: 23.05.2021).
11. Pat. DE10200927 A1. Verfahren und Vorrichtung zur Herstellung von Formen oder Kernen für Giessereizwecke, 2003.
12. Pat. WO 2004/080145 A2. Magnesium and/or aluminium sulphate moulds and cores comprising a phosphate or borate additive and their production, 2004.
13. Pat. DE19632293 C2. Process for the production of core moldings for foundry technology, 1999.
14. Wintgens R. Angepasste Maschinentechnik für die Kernherstellung mit anorganischen Bindemitteln. Giesserei. 2012. No. 2. pp. 28–32.
15. Boehm R. Anorganische Kernbinder-Technologie: von Deutschland in die Welt. Giesserei. 2016. No. 12. pp. 30–35.
16. Zach A., Kleinert B., Nitsch M., Nitsch U. Anorganische Kernbinderreste in bentonitischen Formstoffsystemen. Giesserei. 2020. No. 10. pp. 34–40.
17. Polzin H., Kooyers T. Anorganisches Kernbindersystem für den Eisenguss – ein neuer Ansatz. Giesserei. 2018. No. 10. pp. 42–47.
18. Polzin H. Anorganische Binder: Zur Form- und Kernherstellung in der Gießerei. Verlag: Schiele & Schön, 2019. 228 p.
19. Steinhäuser Th. Regenerierung von anorganisch gebundenen Kernsanden. Giesserei. 2012. No. 3. pp. 58–61.
20. Evstigneev А. I., Petrov V. V., Dmitriev E. А., Tarasova А. А. Study of properties of mixtures with binders based on magnesium sulfate. Trudy Nizhegorodskogo gosidarstvennogo tekhnicheskogo universiteta imeni R. E. Alekseeva. 2010. No. 2 (81). pp. 232–237.
21. Leushin I. O., Maslov К. А., Subbotin А. Yu., Chistyakov D. G. The new method for fabrication of high-tech moulding cores based on liquid glass binding agent. Chernye Metally. 2010. No. 12. pp. 18–20.
22. Nikifirova M. V. et. al. Method for manufacturing cast rods from liquid glass mixtures in heated “Thermo-Shock-CO2-Process” equipment. Patent RF, No. 2630399. Applied: 28.12.2015. Published: 07.09.2017. Bulletin No. 25.
23. GOST 13078–81. Sodium silicate solute. Specifications. Introduced: 01.01.1982.
24. GOST 15028–77. Aluminium potassium sulfate technical. Specifications. Introduced: 01.01.1978.
25. GOST 2138–91. Moulding sands. General specifications. Introduced: 01.01.1993.
26. GOST 23409.7–78. Moulding sands, moulding and core sand mixtures. Introduced: 01.01.1981.
27. GOST 23409.6–78. Moulding sands, moulding and core sand mixtures. Introduced: 01.01.1980.
28. GOST 23409.9–78. Moulding and core sand mixtures. Introduced: 01.01.1980.
29. GOST 977–88. Steel castings. General specifications. Introduced: 01.01.1990.
30. GOST 10772–78. Water foundry coatings for mould paints. General specifications. Introduced: 01.01.1978.

Language of full-text русский
Полный текст статьи Получить