Журналы →  Chernye Metally →  2022 →  №1 →  Назад

90th anniversary of Magnitogorsk Iron and Steel Works
Название Improvement of the production of rolled products from high-carbon steels in the conditions of the PJSC MMK section shop
DOI 10.17580/chm.2022.01.02
Автор S. S. Alikulov, A. V. Degtyarev, M. V. Blokhin
Информация об авторе

PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia:
S. S. Alikulov, Deputy Head of the Section Rolling Shop (for technology), e-mail: alikulov.ss@mmk.ru
A. V. Degtyarev, Leading Specialist in the Research of Bar-rolled Stock at the Scientific and Technical Center, e-mail: degtyarev.av@mmk.ru
M. V. Blokhin, Leading Engineer of the Scientific and Technical Center, e-mail: blokhin.MV@mmk.ru


The PJSC Magnitogorsk Iron and Steel Works (MMK) Group is implementing a technical re-equipment program aimed at expanding the range of wire and bar-rolled products manufactured, import substitution, and providing the domestic market of the Russian Federation with high-quality articles. To ensure the capacities of the Magnitogorsk Wire Plant (OJSC MMK-METIZ) with high-quality semi-finished coiled rolled products, the small-section wire mill 170 of the PJSC MMK section shop was reconstructed. The key factors affecting the quality indicators of high-carbon wire rod have been studied, technical and technological solutions have been introduced that made it possible to increase the dispersion of pearlite in the microstructure of the wire rod, the uniformity of mechanical properties along the length of the coil, and also to reduce the depth of the decarburized layer. At the same time, work on improving the quality of the bar-rolled products manufactured does not stop. Research is being carried out to improve the quality of continuous cast billets, and a digital twin of the mill’s accelerated air cooling line is being developed as part of an initiative to digitize processes. The achieved results allowed the consumer to abandon one operation of intermediate heat treatment in the wire production process while ensuring the quality of the finished product, which significantly reduced the cost of production in the wire processing.

Ключевые слова Coiled rolled products, high-carbon steel, reconstruction, accelerated cooling, Stelmore process, mechanical properties, structure, patenting
Библиографический список

1. GOST 8233–56. Steel. Microstructure standards. Introduced: 01.07.1957. Moscow: Izdatelstvo standartov, 1956.
2. Parusov V. V., Parusov E. V., Sagura L. V., Sivak A. I., Klimenko A. P., Sychkov A. B. Study of two-stage cooling regime of boron and vanadium microalloyed С80D2 steel rolled wire. Metallurgical and Mining Industry. 2011. Vol. 3. No. 3. pp. 114–118.
3. Parusov V. V., Sychkov А. B., Zhigarev М. А., Perchatkin А. V. Optimum microstructure formation in high-carbon wire rod. Stal. 2005. No. 1. pp. 82–85.
4. Lutsenko V. А., Bobkov P. А., Lutsenko О. V., Golubenko Т. N., Gordienko V.V. Features of the formation of the high-carbon steel pearlite structure in the line of the 150 wire mill. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2014. No. 9. pp. 54–58.
5. Parusov E. V., Lutsenko V. A., Chuiko I. N., Parusov O. V. Influence of chemical composition and cooling parameters on kinetics of austenite decomposition in high-carbon steels. Chernye Metally. 2020. No. 9. pp. 39–44.
6. Peretyagina E. A., Lutsenko V. A., Vengura A. V., Bobkov P. A., Savinkov V. V. Energy-saving sorbitisation of high-carbon wire rod in the 150 mill. Steel in Translation. 2013. Vol. 43. No. 5. pp. 321–325.
7. Sychkov А. B., Malashkin S. О., Kamalova G. Ya. Study of the formation of the structure and properties of high-carbon wire rod at different cooling rates. Kachestvo v obrabotke metallov. 2017. No. 1. pp. 22–27.
8. Evteev Е. А., Klekovkin А. А., Podolskiy B. G. Reconstruction of the air cooling section of 150 mill. Stal. 2010. No. 3. pp. 63–66.
9. Gorbanev А. А., Zhukov S. М., Filippov V. V., Tishchenko V. А., Stelbov А. B. Improvement of the uniformity of cooling the turns of wire rod on the roller conveyor of a modern wire mill. Metallurgiya i gornorudnaya promyshlennost. 2002. No. 3. pp. 44–47.
10. Zyuzin V. I. Mastering the technology of wire rod aerial patenting at 150 mill after reconstruction. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2002. No. 3. pp. 39–43.
11. Lingxiang Hong, Bo Wang, Shuai Feng, Zhilang Yang, Yaowei Yu, Wangjun Peng, Jieyu Zang. A three-dimension mathematical model to predict air-cooling flow and trmperature distribution on wire rod loops in Stelmor air-cooling system. Applied Thermal Engineering. 2017. Vol. 116. pp. 766–776.
12. Joohg-Ki Hwang. Effect of ring configuration on the deviation in cooling rate and mechanical properties of a wire rod during the Stelmor cooling process. Journal of Materials Engineering and Perfomance. 2020. Vol. 29. Iss. 3. pp. 1732–1740.
13. Sychkov А. B., Parusov V. V., Ivin Yu. А., Dzyuba А. Yu., Zaytsev G. S. Features of the technology for production of high-carbon wire rod. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2014. No. 1. pp. 38–42.
14. Parusov V. V., Derevyanchenko I. V., Sychkov A. B., Nesterenko A. M., Parusov E. V., Zhigarev M. A. Ensuring high quality indices for the wire rod used to make metal cord. Metallurg. 2005. No. 11. pp. 45–51.
15. Lutsenko V. А., Levchenko G. V., Lutsenko О. V., Bobkov P. А., Baradyntseva Е. P., Seregina Е. S. Influence of wire rod structure, subjected to thermal-mechanical treatment, on qualitative parameters of high-strength bead wire. Chernye Metally. 2013. No. 10. pp. 52–55.

Language of full-text русский
Полный текст статьи Получить