Журналы →  Eurasian Mining →  2021 →  №2 →  Назад

EQUIPMENT AND MATERIALS
Название The main directions of increasing the operational efficiency of high productive belt conveyors in the mining industry
DOI 10.17580/em.2021.02.14
Автор Galkin V. I., Sheshko E. E., Dyachenko V. P., Sazankova E. S.
Информация об авторе

National University of Science and Technology – NUST MISIS, Moscow, Russia:

Galkin V. I., Professor, Doctor of Engineering Sciences, Vgalkin07@rambler.ru
Sheshko E. E., Professor, Candidate of Engineering Sciences
Dyachenko V. P., Associate Professor, Candidate of Engineering Sciences
Sazankova E. S., Associate Professor, Candidate of Engineering Sciences

Реферат

When transporting bulk cargo at long distances, modern high productive belt conveyors must be equipped with energy-saving conveyor belts, which can reduce the energy consumption of the belt drive by 28%, and reduce the negative impact on the environment, including with ESG principles. Formula is proposed to determine the mass of emissions of harmful substances into the atmosphere - carbon dioxide, nitrous oxide and solid particles depending on the type of fuel burned to generate electricity. The use of supporting rollers on conveyors with a shortened middle roller, as well as with lower resistance coefficients to the rotation of the rollers, allows an additional 5-7% energy savings. The issue of saving energy consumed by the belt conveyor by optimizing the control and monitoring of the belt speed, as well as the processes of starting and braking the conveyor belt, is considered. Installation of gearless drives equipped with synchronous motors at high productive belt conveyors of long length allows to increase the efficiency of the drives, as well as to eliminate the work of gearboxes, starting couplings, which significantly reduces capital and operating costs.

Ключевые слова Conveyors, energy saving belts, belt cover, energy consumption, carbon dioxide, emissions, atmosphere, rolling resistance, idlers, belt speed, drive, gearless drives, synchronous motors, stator, rotor, efficiency
Библиографический список

1. Hager M., Hintz A. The Energy-Saving Design of Belts for Long Conveyor Systems. Bulk Solids Handling. 1993. Vol. 13, No. 4. pp. 749–758.
2. Thompson M., Jennings A. Impumelelo coal mine is home to the world’s longest belt conveyor. Mining engineeiıng. 2016. Vol. 68, No. 10. pp. 14–35.
3. Conveyor belts – Indentation rolling resistances of conveyor belts related to belt width – Requirements, testing. DIN 22123. 2012. Available at: https://www.techstreet.com/standards/din-22123?product_id=1841776 (accessed: 09.11.2021).
4. Overmeyer L. Test Rig for Determination of Indentation. Rolling Resistance of Conveyor Belts according to DIN 22123. 2012.
5. Galkin V. I., Sheshko E. E, Sazankova E.S. The influence of the types and characteristics of belts on the operational parameters of special belt conveyors. Gornyi Zhurnal. 2015. No. 8. pp. 88–91. DOI: 10.17580/gzh.2015.08.18
6. Reicks A. V., Rudolphi T. J., Wheeler C. A. A Comparison of calculated and measured indentation losses in rubber belt covers. Bulk Solids Handling. 2012. Vol. 32, No. 3.
7. Galkin V. I., Sheshko E. E. Belt conveyors at the current stage of development of mining technique. Gornyi Zhurnal. 2017. No. 9. pp. 85–90. DOI: 10.17580/gzh.2017.09.15
8. Hintz A. Effect of Belt Design on the Energy Consumption of Belt Conveyor Systems. Dissertation University of Hannover. 1993.
9. Van de Ven H., Beers H., Lodewijks G., Drenkelford S. Aramid in conveyor belts for extended lifetime, energy saving and environmental effects. Bulk Solids Handling. 2016. Vol. 36, No. 6. pp. 16–21.
10. Galkin V. I., Shojaatalhosseini A. Establishment of the rational geometrical form rollers linear sections of powerful tape conveyors. Gornoe oborudovanie i mehanika. 2009. No. 3. pp. 50–54.
11. GURTEC: HM Series rollers, an intelligent design for heave duty maining applications. Available at: https://news.bulkonline.com/news-english/gurtec-hm-series-rollers-anintelligent-design-for-heavy-duty-mining-applications.html (accessed: 09.11.2021).
12. He D. Energy saving for belt conveyors by speed control. TRAIL Research School. 2017. DOI: 10.4233/uuid:a315301e-6120-48b2-a07b-cabf81ab3279
13. He D., Pang Y., Lodewijks G. Determination of Acceleration for Belt Conveyor Speed Control in Transient Operation. International Journal of Engineering and Technology. 2016. Vol. 8, No. 3. pp. 206–211.
14. Minkin A., Borsting P., Becker N. Pipe Conveying the next stage: A new technology for steep incline high capacity open pit conveying. Bulk solids handling. 2016. Vol. 36, No. 2(3).
15. Dilefeld M. Gearless belt conveyor drives – new technology for highcapacity systems. Bulk solids handling. 2014. Vol. 34, No. 1.
16. Takraf. Gearless drives for high-capacity belt conveyors. Mining engineering. 2014. Available at: https://me.smenet.org/docs/Publications/ME/Issue/06_01MIN_WebExclusive_June1.pdf (accessed: 10.11.2021).

Полный текст статьи The main directions of increasing the operational efficiency of high productive belt conveyors in the mining industry
Назад