Журналы →  Gornyi Zhurnal →  2021 →  №9 →  Назад

Название Justification of process flows and designs for mining blind ore bodies in the vicinity of mined-out voids
DOI 10.17580/gzh.2021.09.04
Автор Eremenko A. A., Khristolyubov E. A., Filippov V. N., Konurin A. I.
Информация об авторе

Chinakal Institute of Mining, Siberian Branch, Russian Academy of Sciences, Novosibirsk, Russia:

A. A. Eremenko, Chief Researcher, Professor, Doctor of Engineering Sciences, eremenko@ngs.ru
V. N. Filippov, Senior Researcher, Candidate of Engineering Sciences
A. I. Konurin, Senior Researcher, Candidate of Engineering Sciences


EVRAZ ZSMK’s Division in Gornaya Shoria, Tashtagol, Russia:

E. A. Khristolyubov, Head of Engineering Department


The trending deep-level mining governs substantial alteration of geomechanical situation in mines. The key approach to the stress–strain behavior assessment in rock mass when predicting and preventing geodynamic events is the geomechanical analysis of the rock mass behavior in the course of mining. The rockburst-hazardous mining research can use such methods as microseismic investigation, acoustic micromeasurements, electrometry, deformation monitoring, etc. The authors have accomplished the stress–strain behavior assessment in rock mass during mining at rockburst-hazardous deposits of Tashtagol and Sheregesh. The process solutions on underground mining in high-stress rock mass are analyzed. The process flow charts are developed. Alternative stoping technologies are identified, and the design data of mining systems for blind ore bodies are justified. It is shown that safe and efficient mining of blind iron ore bodies in the vicinity of mined-out voids in rockburst-hazardous conditions is achievable using: room-and-pillar mining, with rooms arranged across the strike of an ore body, and with subsequent transition to sublevel caving with levels 70 m high and sublevels 25–30 m high; shrinkage stoping and bulk caving; cut-and-fill method with cemented backfill. It is found that in top-downward mining of blind ore bodies, the transition from the room-andpillar system to sublevel caving and cut-and-fill method ensures reduction in ore loss and dilution by 1.1–1.5 and 7.5–10 %, respectively.

Ключевые слова Rock burst, blind ore body, geotechnology, backfilling facility, blasting, loss, dilution, rocks, deposit
Библиографический список

1. Galchenko Yu. P., Eremenko V. A., Kosyreva M. A., Vysotin N. G. Features of secondary stress field formation under anthropogenic change in subsoil during underground mineral mining. Eurasian Mining. 2020. No. 1. pp. 9–13. DOI: 10.17580/em.2020.01.02
2. Sidorov D. V., Ponomarenko T. V., Kosukhin N. I. Geodynamic safety management toward sustainable development of Severouralsk Bauxite Mine. Gornyi Zhurnal. 2021. No. 1. pp. 81–85. DOI: 10.17580/gzh.2021.01.14
3. Rasskazov I. Yu., Fedotova Yu. V., Sidlyar A. V., Potapchuk M. I. Analysis of induced seismic events in rockburst-hazardous nikolaevsk deposit. GIAB. 2020. No. 11. pp. 46–56.
4. Eremenko A. A., Konurin A. I., Shtirts V. A., Prib V. V. Identification of higher rock pressure zones in rockbursthazardous iron ore deposits. Gornyi Zhurnal. 2020. No. 1. pp. 78–81. DOI: 10.17580/gzh.2020.01.15
5. Eremenko A. A., Shaposhnik Yu. N., Filippov V. N., Konurin A. I. Development of scientific framework for safe and efficient geotechnology for rockburst-hazardous mineral deposits in Western Siberia and the Far North. Gornyi Zhurnal. 2019. No. 10. pp. 33–39. DOI: 10.17580/gzh.2019.10.03
6. Meifeng Cai. Prediction and prevention of rockburst in metal mines – A case study of Sanshandao gold mine. Journal of Rock Mechanics and Geotechnical Engineering. 2016. Vol. 8, Iss. 2. pp. 204–211.
7. Wu Cai, Xianxi Bai, Guangyao Si, Wenzhuo Cao, Siyuan Gong et al. A Monitoring Investigation into Rock Burst Mechanism Based on the Coupled Theory of Static and Dynamic Stresses. Rock Mechanics and Rock Engineering. 2020. Vol. 53, Iss. 12. pp. 5451–5471.
8. Simser B. P. Rockburst management in Canadian hard rock mines. Journal of Rock Mechanics and Geotechnical Engineering. 2019. Vol. 11, Iss. 5. pp. 1036–1043.
9. Yuanyuan Pu, Apel D. B., Liu V., Hani Mitri. Machine learning methods for rockburst prediction-stateof-the-art review. International Journal of Mining Science and Technology. 2019. Vol. 29, Iss. 4. pp. 565–570.
10. Kolie B., Yao Jun, Sunahara G., Camara M. Characterization of the rock blasting process impacts in Lefa gold mine, Republic of Guinea. Environmental Earth Sciences. 2021. Vol. 80, Iss. 5. 175. DOI: 10.1007/s12665-021-09477-x
11 . Eremenko A. A., Eremenko V. A., Gaidin A. P. Geological and geomechanical conditions of iron ore mining in the Altai-Sayan folded zone. Novosibirsk : Nauka. 2009. 224 p.
12. Kopytov A. I., K imeev V. M. Gornaya Shoria. From the ancient metallurgy to the up-to-date mining industry : Historical sketches. Kemerovo : Primula, 2020. 431 p.
13. Eremenko A. A., Filippov V. N., Nikitenko S. M., Khristolyubov E. A. Specific Features of Iron Ore Mining in Gornaya Shoria. Journal of Mining Science. 2017. Vol. 53, No. 5. pp. 868–881.
14. Tyupin V. N. Estimation of critical depth of deposits by rock bump hazard condition. Journal of Mining Institute. 2019. Т. 236. С. 167–171.
15. Rasskazov I. Yu. Improvement of geomechanical monitoring methods and equipment to prevent disastrous events in rockburst-hazardous mines. Problems and prospects of integrated development and preservation of the subsoil : Headnotes of II Academician Trubetskoy International School. Moscow : IPKON RAN, 2016. pp. 129–133.
16. Khachay O. A., Khachay O. Yu. Comparison of rock burst massive state sinergetic features peculiarities, defined by seismic and induction electromagnetic monitoring data. Monitoring. Nauka i tekhnologii. 2014. No. 3. pp. 43–48.
17. Aksenov Z. V. Overview of geocontrol methods implemented in coal mines. Safety of process and production flows : III International Conference Proceedings. Yekaterinburg : Izdatelstvo UGGU, 2021. pp. 4–8.
18. Potokin A. S., Kuznetsov N. N., Zemtsovskiy A. V. The review of the methods of measuring the acoustic and electromagnetic emission parameters in rock masses. Trudy Kolskogo nauchnogo tsentra RAN. 2019. Vol. 10, No. 5-18. pp. 132–138.
19. Yang Yu, Xiangyu Wang, Jianbiao Bai, Lianying Zhang, Hongchun Xia. Deformation Mechanism and Stability Control of Roadway Surrounding Rock with Compound Roof: Research and Applications. Energies. 2020. Vol. 13, No. 6. 1350. DOI: 10.3390/en13061350
20. Panzhin A. A., Sashurin A. D., Panzhina N. A., Mazurov B. T. Geodesic support of geodynamic monitoring of objects of subsurface use. Vestnik SGUGiT. 2016. No. 4(36). pp. 26–39.
21. Emanov A. F., Emanov A. A., Fateev A. V., Bakh A. A., Durachenko A. V. et al. Methodological basis of joint instrumental seismological monitoring of the geological environment and especially responsible buildings and structures. Vestnik Nauchnogo tsentra VostNII po promyshlennoy i ekologicheskoy bezopasnosti. 2019. No. 3. pp. 14–44.
22. Neverov S. A., Neverov A. A. Geomechanical Assessment of Ore Drawpoint Stability in Mining with Caving. Journal of Mining Science. 2013. Vol. 49, No. 2. pp. 265–272.
23. Neverov A., Konurin A., Shaposhnik Yu., Neverov S., Shaposhnik S. Geomechanical substantiation of sublevel-chamber system of developing with consolidating stowing. Proceedings of the 16th International Multidisciplinary Scientific GeoConference. Albena, 2016. Book 1, Vol. 2. pp. 443–450.
24. Balek A. E., Sashurin A. D., Kharisov T. F. Improvement of underground mining of Sokolovskoe deposit by systems with caving under conditions of watered overlying rocks. Advanced geotechnologies for metallic and nonmetallic ore mining : VIII International Conference Proceedings. Yekaterinburg : Izdatelstvo UGGU, 2019. pp. 188–195.

Language of full-text русский
Полный текст статьи Получить