Журналы →  CIS Iron and Steel Review →  2019 →  №2 →  Назад

Rolling and Metal Forming
Название Approximate calculation method of subwater pipeline's form under its laying on sea-bottom
DOI 10.17580/cisisr.2019.02.09
Автор V. N. Shinkin
Информация об авторе

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru

Реферат

The various classical approximations are used to describe the shape of the subwater part of pipelines: for example, the equations of elastic line of slightly-sloping beam, non-stretched ideal flexible thread and slightly-sloping rigid thread. However, all these equations have the significant drawbacks that prevent them from being applied for the accurate calculating of the shape of subwater pipelines at their laying in deep-water seas, which are usually much deeper than lakes and rivers. So, the equations of the elastic line of slightly-sloping beam and slightly-sloping rigid thread are valid only in the case of small inclination angles of the pipeline, and the equation of the non-stretched ideal flexible thread (the equation of the chain line of the cable) does not take into account the resistance of the pipeline to bending and torsion. The subwater main pipelines are laid on the sea-bottom by the special marine ships and can have a laying depth of more than two kilometers. In this case, the longitudinal axis of the pipeline is so much curved during the laying that the excessive bending can lead to the destruction or defects of the pipeline. Therefore, at the laying of pipelines, it is extremely important to know the shape of their free subwater part in water and to correctly apply the pontoons, stingers and pipeline tension with the help of the anchors of the marine ships. The nonlinear equation of fourth order for the elastic flexible rod does not involve restrictions on the inclination angle of the subwater part of the pipeline and takes into account the resistance of the pipeline to bending. Although this nonlinear equation has no the general analytical solution, it can be solved numerically, using the Runge-Kutta method of fourth-order accuracy, or approximately by means of the power series. The approximate solution of the equation of elastic flexible rod by means of a power series is given below. For this solution, the coefficients of the series are found up to the 12th degree of the series argument. As an example of the use of the found approximate solution, the numerical calculation of the shape and inclination angle of the subwater part of TurkStream at its laying on the sea-bottom are given.

Ключевые слова Elastic line of slightlysloping beam, non-stretched perfectly-flexible thread, slightly-sloping hard thread, elastic flexible rod, approximate solution, power series, subwater pipeline
Библиографический список

1. Borodavkin P. P., Berezin V. L., Shadrin O. B. Underwater pipelines. Moscow : Nedra. 1975. 415 p.
2. Kachurin V. K. Theory of hanging systems. Static calculation. Leningrad; Moscow : Gosstroiizdat. 1962. 223 p.
3. Merkin D. R. Introduction to mechanics of flexible thread. Moscow : Nauka. 1980. 240 p.
4. Svetlitskiy V. A. Mechanics of flexible rods and threads. Moscow : Mashinostroenie. 1978. 222 p.
5. Shinkin V. N. Springback coefficient of the main pipelines’ steel large-diameter pipes under elastoplastic bending. CIS Iron and Steel Review. 2017. Vol. 14. pp. 28−33.
6. Shinkin V. N. Arithmetical method of calculation of power parameters of 2N-roller straightening machine under flattening of steel sheet. CIS Iron and Steel Review. 2017. Vol. 14. pp. 22−27.
7. Zorin E. E., Lanchakov G. A., Stepanenko A. I., Shibnev A. V. Serviceability of pipelines. Part 1. Calculared and operational reliability. Moscow : Nedra. 2000. 244 p.
8. Lanchakov G. A., Zorin E. E., Pashkov Ju. I., Stepanenko A. I. Serviceability of pipelines. Part 2. Resistance to destruction. Moscow : Nedra. 2001. 350 p.
9. Lanchakov G. A., Zorin E. E., Stepanenko A. I. Serviceability of pipelines. Part 3. Diagnostics and prediction of resource. Moscow : Nedra. 2003. 291 p.
10. Shinkin V. N. Simplified calculation of the bending torques of steel sheet and the roller reaction in a straightening machine. Steel in Translation. 2017. Vol. 47. No. 10. pp. 639−644.
11. Mazur I. I., Ivantsov O. M. Safety of pipeline systems. Moscow : ELIMA. 2004. 1104 p.
12. Demchenko V. G., Demchenko G. V. Arterial pipelines. Reliability. Conditions of work and destructions. Moscow : Nedra. 2007. 304 p.
13. Koroshak A. A., Nechval A. M. Designing and exploitation of oil-and-gas pipelines. Saint Petersburg : Nedra. 2008. 488 p.
14. Tetelmin V. V., Yazev V. A. Main oil-and-gas pipelines. Dolgoprudny: Intellekt. 2010. 352 p.

Полный текст статьи Approximate calculation method of subwater pipeline's form under its laying on sea-bottom
Назад