Журналы →  Tsvetnye Metally →  2019 →  №6 →  Назад

HEAVY NON-FERROUS METALS
Название Thermodynamic modeling of pressure oxidation leaching of copper-nickel converter matte
DOI 10.17580/tsm.2019.06.01
Автор Elfimova L. G., Ageev N. G., Naboychenko S. S.
Информация об авторе

Ural Federal University named after the first President of Russian Federation B. N. Eltsin, Ekaterinburg, Russia:

L. G. Elfimova, Senior Lecturer, e-mail: elg-mtf@yandex.ru
N. G. Ageev, Assistant Professor
S. S. Naboychenko, Professor of the Department “Non-Ferrous Metals Metallurgy”

Реферат

In this article, HSC Chemistry 6 software (Equilibrium Composition module) was used to create thermodynamic prediction of pressure oxidation leaching of copper-nickel converter matte in sulfuric acid media. A synthetic sample of the material was prepared by admixture of copper-nickel mattes and nickel plants semi-products. According to rational composition of the material and stoichiometric amounts of reagent substances for chemical reactions of the leaching were selected the following variable parameters: sulfuric acid consumption of 0.001–1.0 kmol and oxygen consumption of 0.09, 0.62, 1.2, 1.8 kmol. Possible chemical reactions and equilibrium state diagrams of solid and liquid phases are given. At oxygen consumption of 0.09 kmol – metallic nickel, iron and copper and cobalt sulfide were dissolved. The main nickel phase of the model sample – heazlewoodite (Ni3S2), were shown to decompose into NiS and NiSO4. A probability of the refractory compound Ni3S4 formation as an intermediate phase were observed. The main copper phase of the model sample – chalcocite (Cu2S) was shown to dissolve at higher values of sulfuric acid consumption with CuS and CuSO4(a) formation, however, aqueous copper sulfate wasn’t observed as a product of process due to its exchange interaction with nickel and cobalt sulfides. The possibility of elemental sulfur formation was confirmed. An increase in oxygen consumption up to 1.2 kmol led to decrease in nickel sulfides amount as the leaching products. Significant part of nickel was presented in solution (93%). At oxygen consumption of 1.8 kmol and low sulfuric acid consumption — copper sulfides were partly oxidized with aqueous copper sulfate formation and copper hydroxide and basic sulfate were observed as the main solid phases. An increase in sulfuric acid consumption higher than 0.4 kmol allowed to extract most of the copper into solution with aqueous sulfate formation. A comparison of the thermodynamic prediction data with experimental results (t = 85 оC, L/S = 6, PO2 = 0.23 MPa, [H2SO4]/Ni = 0.52, acid consumption 0.54 g/g) was shown significant similarities. Results indicate the possibility of nickel/copper selective separation at the stage of oxidative leaching.

Ключевые слова Thermodynamic modeling, converter matte, leaching, oxygen, sulfuric acid, sulfides, copper, nickel, phase composition, extraction
Библиографический список

1. Popov V. A., Tsemekhman L. Sh., Dyachenko V. T., Besedovskiy S. G., Savinova Yu. A. Thermodynamic analysis of micro impurities distribution between the products of Kola MMC pyrometallurgical production. Tsvetnye Metally. 2011. No. 8-9. pp. 81–85.
2. Popov V. A., Tsemekhman L. Sh. Microimpurities behavior in metallurgical processing of copper-nickel sulfide concentrates. Tsvetnye Metally. 2014. No. 9. pp. 58–62.
3. Tsymbulov L. B., Pigarev S. P., Jak E. Thermodynamic analysis of copper mattes and concentrates converting process in a two-zone Vanyukov furnace. Tsvetnye Metally. 2011. No. 8–9. pp. 62–72.
4. Koltsov V. Yu. Thermodynamic basis of oxidized nickel ore sulfatization process. Tsvetnye Metally. 2014. No. 8. pp. 28–31.
5. Popov V. A., Tsemekhman L. Sh., Velyuzhinets G. A., Fomichev V. B. Behavior of arsenic in pyrometallurgical production of copper. Tsvetnye Metally. 2014. No. 5. pp. 24–28.
6. Reznik I. D., Ermakov G. P., Shneerson Ya. M. Nickel. In three volumes. Moscow : Nauka i tekhnologii, 2003. Vol. 3. 608 p.
7. Yan Fu, Bin-chuan Li, Chuan-lin Fan, Xiu-jing Zhai, Xijun Zhang, Donghe Li. Selective leaching of nickel from low-sulfur Ni – Cu matte at atmospheric pressure. Transactions of Nonferrous Metals Society of China. 2010. Vol. 20. pp. s71–s76.
8. Naftal M. N., Petrov A. F., Saverskaya T. P., Yurev A. I., Karpushova D. D. Peculiarities of technology of sulphate leaching of converter matte with high ratio of nickel and copper. Tsvetnye Metally. 2013. No. 6. pp. 35–42.
9. Burukhin A. N., Galantseva T. V., Naftal M. N., Sushchev A. V., Shestakova R. D. Nickel-refining plant reorganization. Tsvetnye Metally. 2000. No. 6. pp. 56–61.
10. Naftal M. N., Shestakova R. D., Galantseva T. V., Petrov A. F., Kozhanov A. L. Features of copper-nickel converter matte leaching with high-copper content. Tsvetnye Metally. 2000. No. 6. pp. 44–49.
11. Karimov К. А., Kritskiy А. V., Elfimova L. G., Naboychenko S. S. Low-Temperature Pressure Leaching of Converter Matte in Sulfuric Acid Solutions. Metallurgist. 2017. No. 3. pp. 71–74.
12. Ageev N. G., Naboychenko S. S. Metallurgical calculations using the HSC Chemistry application package: studies. manual. Ekaterinburg : Publishing house of Ural University, 2016. 124 p.
13. Ufaley is the birthplace of Russian nickel. Issue of works. Ed. O. I. Khokhlov. Chelyabinsk : Kniga, 1993. 334 p.
14. Vydysh A.V. Physico-chemical studies on high-copper converter matte sulphate leaching technology : Dissertation … of Candidate of Engineering Sciences. Saint Petersburg, 2005. 153 p.
15. Naboychenko S. S., Shneerson Ya. M., Kalashnikova M. I., Chugaev L. V. Autoclave hydrometallurgy of non-ferrous metals. Ekaterinburg : GOU VPO USTU-UPI, 2009. Vol. 2. 940 p.
16. Hofirek Z., Kerfoot D. G. E. The chemistry of the nickel-copper matte leach and its application to process control and optimization. Hydrometallurgy. 1992. Vol. 29. pp. 357–381.
17. Rademan J. A. M., Lorenzen L., van Deventer J. S. J. The leaching characteristics of Ni – Cu matte in the acid-oxygen pressure leach process at Impala Platinum. Hydrometallurgy. 1999. Vol. 52. pp. 231–252.
18. Knuutila K., Hultholm S. E., Sah n B., Rosenback L. New nickel process increasing production at “Outokumpu Harjavalta metals oy”, Finland. ALTA 1997. Nickel/cobalt pressure leaching and hydrometallurgy forum. Perth, Western Australia, 19–20 May 1997.

Language of full-text русский
Полный текст статьи Получить
Назад