BENEFICIATION TECHNOLOGY | |
Название | The Donskoy Ore Mining and Processing Industrial Complex chromite tailings retreatment technology development |
DOI | 10.17580/or.2017.02.03 |
Автор | Gazaleeva G. I., Shikhov N. V., Vlasov I. А., Shigaeva V. N. |
Информация об авторе | JSC «Uralmekhanobr» (Ekaterinburg, Russia): Gazaleeva G. I., Deputy General Director for Analytical Work, Doctor of Engineering Sciences, gazaleeva_gi@umbr.ru E-mail (common): umbr@umbr.ru |
Реферат | The paper presents the results of the Donskoy Ore Mining and Processing Complex concentrating plant — the TNC Kazchrome JSC branch plant — chromite tailings with Cr2O3 mass fraction of 25.28 % retreatment technology development studies. The technology shall provide for production of high-grade chromite concentrate with chrome oxide mass fraction of at least 49 % and tailings with Cr2O3 mass fraction within 10 %. The up-to-date methods of analysis were used for starting tailings material studies, including optical and electronic microscopy with microscopes AxioImager and EVA-MA 15 from Karl Zeiss. The studies of valuable minerals liberation degree and chrome oxide recovery dependence on feed material size permitted to predict possible separation of +0.2 mm size fraction at the head of the process and develop initial processing flow sheet consisting of fine screening, hydrocycloning and screw separation operations. On the basis of separation characteristics of these operations, processing results are predicted, and their analysis showed the advisability of including only one screw separation operation into the process. As a result of the first screw separation, concentrate was produced with chrome oxide mass fraction of 48.3 %; fine screening of 0.2 mm size fraction permitted to separate 19.5 % of tailings with Cr2O3 mass fraction of 8.7 %. The obtained middling products were subjected to testing with a view to verify possible separation of final concentrate by means of gravity concentration, magnetic separation and flotation methods. A scaled-up laboratory setup was used to verify a possibility of producing saleable chromite concentrate with Cr2O3 mass fraction of 49.08 %, with yield of 37.50 % and Cr2O3 recovery being 72.80 %. The technology was accepted for design and engineering development. |
Ключевые слова | Chromite ores processing tailings, electronic microscopy, chromite concentrate, minerals liberation degree, separation characteristics, fine screening |
Библиографический список | 1. Methodical recommendations on the application of the Classification of the deposits reserves and the forecast resources of solid minerals. Chrome ores. Moscow, 2007. 36 p. |
Language of full-text | русский |
Полный текст статьи | Получить |