Журналы →  Gornyi Zhurnal →  2016 →  №12 →  Назад

POWER SYSTEM MANAGEMENT. AUTOMATION
Название Control algorithms for mining and metallurgical plant-ambient environment system stability
DOI 10.17580/gzh.2016.12.17
Автор Sokolov A. A., Miroshnikov A. S., Sokolova E. A.
Информация об авторе

North Caucasian Mining and Metallurgical Institute (State Technological University), Vladikavkaz, Russia:

A. A. Sokolov, Associate Professor, Candidate of Engineering Sciences, asklv@mail.ru
A. S. Miroshnikov, Associate Professor, Candidate of Engineering Sciences
E. A. Sokolova, Associate Professor, Candidate of Engineering Sciences

Реферат

Aiming at the enhancement of the stability control efficiency in the system of a mining and metallurgical plant and the ambient environment, the article proposes a special algorithmic support and control flow charts. Also, the operating principle of one of the key algorithms of the mining and metallurgical plant–ambient environment stability control with regard to maximum allowable parameters of mining cycles is described. Monitoring of current parameters of mining cycles is implemented by an information-and-analysis system in the on-line mode, with the direct control over current parameters of toxic emission concentrations and their fluctuations from allowable levels. The obtained data are used to generate a matrix of the current parameters to be then analyzed using a computer program. In case of the excess of the current parameters over the allowable values, the cause of the excess is revealed and the decision-making support system (DMSS) generates decisions on adjustment and correction of a process flow. Under the normal conditions, the data are stored in the data base of DMSS. For application of the developed algorithms in the information-and-analysis systems toward the enhanced efficiency of the mining and metallurgical plant–ambient environment stability control in Russia, the data bases on the maximum allowable parameters of mining cycles should be adjusted to account for characteristics of specific process flows. The proposed algorithms of intelligence support contribute to expansion of the existing class of active tasks on efficient management in the mining and metallurgical industry owing to new options of the analysis, monitoring and control of mining-induced events in process flows, which greatly abates industrial load in the system of mining and metallurgical plant and the ambient environment.
The study has been supported by the Ministry of Education and Science of the Russian Federation in the framework of the basic part of the Governmental Assignment for R&D under the topic of Special Mathematical and Program Support of New-Structure Analysis and Processing of Data on Process Cycles in Mining and Metallurgical Plants, Project No. 3943.

Ключевые слова Control algorithms, mining and metallurgical plant, data analysis and processing, process cycle, maximum allowable emission
Библиографический список

1. Petrov Yu. S., Sokolov A. A. Technogenic cycle of the enterprise — the integral part of production. Mezhdunarodnyy nauchno-issledovatelskiy zhurnal. 2016. No. 3-2 (45). pp. 35–37.
2. Kumaritov A. M., Sokolova E. A., Sokolov A. A. Geo-information system of ecological monitoring in inner-city industrial areas. Gornyi Zhurnal. 2016. No. 2. pp. 94–96. doi: 10.17580/gzh.2016.02.18
3. Petrov Yu. S., Gabaraev O. Z., Sokolov A. A. Generalized evaluation of ecological impact of a mine. Gornyi Zhurnal. 2015. No. 8. pp. 25–27. doi: 10.17580/gzh.2015.08.06
4. Wang H. Factor analysis of corporate environmental responsibility. Environment Development and Sustainability. 2010. Vol. 12, Iss. 4. pp. 481-490. doi: 10.1007/s10668-009-9206-3
5. Frank U. Multi-perspective enterprise modeling: foundational concepts, prospects and future research challenges. Software & Systems Modeling. 2014. Vol. 13, Iss. 3. pp. 941–962. doi: 10.1007/s10270-01200273-9
6. Kulga K. S. Use of an Integrated Computer-Based Information System at Chemical and Oil-and-Gas Machine Production Enterprises. Chemical and Petroleum Engineering. 2014. Vol. 50, Iss. 7. pp. 445–451. doi: 10.1007/s10556-014-9921-y
7. Lee C. K. H., Choy K. L., Ho G. T. S., Lam C. H. Y. A slippery genetic algorithmbased process mining system for achieving better quality assurance in the garment industry. Expert Systems with Applications. 2016. Vol. 46. pp. 236–248. doi: 10.1016/j.eswa.2015.10.035
8. García S., Luengo J., Herrera F. Tutorial on practical tips of the most influential data preprocessing algorithms in data mining. Knowledge-Based Systems. 2016. Vol. 98. pp. 1–29. doi: 10.1016/j.knosys.2015.12.006
9. Sengupta A., Mazumdar C., Bagchi A. A formal methodology for detecting managerial vulnerabilities and threats in an enterprise information system. Journal of Network and Systems Management. 2011. Vol. 19, Iss. 3. pp. 319–342. doi: 10.1007/s10922-0010-9180-y
10. Fayoumi A. Ecosystem-inspired enterprise modelling framework for collaborative and networked manufacturing systems. Computers in Industry. 2016. Vol. 80. pp. 54–68. doi: 10.1016/j.compind.2016.04.003
11. Yurlova N. A., Kayfadzhyan E. N., Shumskaya E. N., Poperechnikova O. Yu. Assessment of ecological safety of flotation reagents in the process of hematite ores concentration. Gornyi Zhurnal. 2014. No. 11. pp. 113–116.
12. Isachenko A. O., Mikhalevich D. S., Yunakov Yu. L. The concept of forming the geoinformation system of a mining enterprise. Gornyi Zhurnal. 2013. No. 5. pp. 62–66.
13. Granderson J., Piette M. A., Ghatikar G. Building energy information systems: user case studies. Energy Efficiency. 2011. Vol. 4, Iss. 1. pp. 17–30. doi: 10.1007/s12053-010-9084-4

Language of full-text русский
Полный текст статьи Получить
Назад