Журналы →  Obogashchenie Rud →  2016 →  №4 →  Назад

SECONDARY RAW MATERIAL PROCESSING
Название Iron ores processing waste materials utilization in soft-mud molding ceramicm bricks production
DOI 10.17580/or.2016.04.10
Автор Nikiforova E. M., Eromasov R. G., Vasilyeva М. N., Simonova N. S.
Информация об авторе

Siberian Federal University (Russia):

Nikiforova E. M., Ph. D. in Engineering Sciences, Senior Researcher, Associate Professor, nem1950@inbox.ru
Eromasov R. G., Senior Lecturer, kmp198@inbox.ru
Vasilyeva M. N., Ph. D. in Chemistry, Associate Professor, Associate Professor, fiz-chim@mail.ru
Simonova N. S., Ph. D. in Engineering Sciences, Associate Professor, Associate Professor, savchenkonat@mail.ru

Реферат

The issues of iron ores processing secondary products utilization in combination with other industrial wastes for the needs of wall ceramic materials production technology are considered. Utilization of the studied iron ores processing wastes in ceramic technology is based on iron oxides ability to sustain ceramic materials sintering process with liquid-phase presence in significantly lower temperatures. Phase composition of the Abakanskoye deposit iron ores processing wastes, following their two-stage dry magnetic separation, and that of aluminium production gas treatment residue, were studied by means of up-to-date methods. Iron ores processing wastes are represented by magnetite, hematite-magnetite, chlorite-magnetite, quartz-carbonate-magnetite associations. Gas treatment residue consists of metamorphized coal particles of graphite, cryolite, chiolite, alumina, fluorite, nepheline, diaspore. They provide reducing medium in ceramic sintering, contributing to transition of iron compounds into ferrous state. Using iron ores processing tailings masses as a component provides for a considerable increase (by 30–40 %) in strength properties of specimens. Addition of mineralizer, based on aluminium production gas treatment residue, to iron ores processing tailings, provides for formation of melt with low dynamic viscosity at 850 ° С, leading to increase in specimens’ strength by 150–180 %. Increase of products’ durability in service owing to introduction of tailings materials is based on shift of free water rapid freezing point to lower temperature range by 2–10 °С, and its complete freezing – by 25–55 °С. A flow sheet has been developed for industrial wastes preparation for utilization in ceramic bricks production technology, currently applied at operating ceramic brick-making plants.

Ключевые слова Ores processing tailings, iron ores, gas treatment residue, sintering, ceramic brick, mineralizer, strength, water absorption, freezethaw durability
Библиографический список

1. Ilichev V. A., Karpenko N. I., Yarmakovskiy V. N. About development of building materials production on the basis of secondary industrial products. Stroitelnye Materialy = Construction Materials, 2011, No. 4, pp. 36–42.
2. Tselyuk D. I., Tselyuk I. N. Management prospects of iron-ore production industrial wastes in Eastern Siberia. Izvestiya Sibirskogo Otdeleniya Sektsii Nauk o Zemle Rossiyskoy Akademii Yestestvennykh Nauk. Geologiya, Poiski i Razvedka Rudnykh Mestorozhdeniy = Proceedings of Siberian Department of the Section of Earth Sciences, Russian Academy of Natural Sciences. Geology, Prospecting and Exploration of Ore Deposits, 2012, Vol. 41, No. 4, pp. 36–42.
3. Butkevich G. R. Problems of involvement of mining industry waste in economical activity. Stroitelnye Materialy = Construction Materials, 2013, No. 7, pp. 62–64.
4. Nikiforova E. M., Yeromasov R. G., Vlasov O. A., Vasilyeva M. N., Simonova N. S. Iron ores wet magnetic separation slimes utilization in expanded-clay aggregate production. Obogashchenie Rud = Mineral Processing, 2015, No. 1, pp. 43–46.
5. Monteiro S., Vieira С. On the production of fired clay bricks from waste materials: A critical update. Construction and Building Materials, 2014, Vol. 68, pp. 599–610.
6. Chao Li, Henghu Sun, Zhonglai Yi, Longtu Li. Innovative methodology for comprehensive utilization of iron ore tailings: Part 2: The residues after iron recovery from iron ore tailings to prepare cementitious material. Journal of Hazardous Materials, 2010, Vol. 174, Iss. 1–3, pp. 78–83.
7. Zhang L. Production of bricks from waste materials – a review. Constr. Build. Mater., 2013, Vol. 47, pp. 643–655.
8. Stolboushkin A. Yu., Berdov G. I., Stolboushkina O. A., Zlobin V. I. Firing temperature impact on structure forming in ceramic wall materials produced of fine dispersed iron ore enrichment wastes. Izvestiya Vuzov. Stroitelstvo = New of Higher Educational Institutions. Construction, 2014, No. 1, pp. 33–41.
9. Fomina O. A., Stolboushkin A. Yu. Formation of rational porous structure of wall ceramics from slimy iron-ore tailings. Stroitelnye Materialy = Construction Materials, 2015, No. 12, pp. 14–19.
10. Stolboushkin A. Yu., Storozhenko G. I. The formation of cell-completed structure of ceramic composite materials (in accordance with example of iron waste). Vestnik Tuvinskogo Gosudarstvennogo Universiteta. No. 3: Tekhnicheskiye i Fiziko-Matematicheskiye Nauki = Bulletin of the Tuva State University. No. 3. Technical and Physical and Mathematical Sciences, 2013, pp. 47–58.
11. Pat. 2005702 Russian Federation.
12. Abdrakhimova E. S., Abdrakhimov V. Z. Role of ferric oxide in formation of phase composition during burning of floor tablets based on waste of fuel-energy industry. Materialovedenie = Materials Science, 2014, No. 7, pp. 42–46.
13. Silva F. L., Araújo F. G. S., Teixeira M. P., Gomes R. C., Krüger F. L. Study of the recovery and recycling of tailings from the concentration of iron ore for the production of ceramic. Ceramics International, 2014, Vol. 40, Iss. 10, Pt. B, pp. 16085–16089.
14. Zubekhin A. P., Yatsenko N. D., Verevkin K. A. Influence of oxidation-reduction conditions of roasting on a phase composition of iron and color of ceramic brick. Stroitelnye Materialy = Construction Materials, 2011, No. 8, pp. 8–11.

Language of full-text русский
Полный текст статьи Получить
Назад