METAL WORKING | |
Название | Modification of diamond stone-cutting tool bundles for marble cutting |
DOI | 10.17580/tsm.2016.03.10 |
Автор | Dzamikhov Kh. Z., Tleuzhev A. B., Polushin N. I., Sorokin M. N. |
Информация об авторе | JSC “Terekalmaz”, Terek, Russia: Kh. Z. Dzamikhov, Engineer A. B. Tleuzhev, Chief Executive Officer
National University of Science and Technology “MISiS”, Moscow, Russia: N. I. Polushin, Head of Scientific-Research Laboratory “Superhard materials” M. N. Sorokin, Senior Researcher of Scientific-Research Laboratory “Superhard materials”, e-mail: sorokin@misis.ru |
Реферат | There was investigated the possibility of manufacturing of diamond-slitting wheel bundles, used in cutting of marble with various strength properties, by combination of the known matrix materials based on copper (V24), cobalt (BD126) and iron (HDR). Diamond-free and diamond containing segments were manufactured by hot pressing in graphite molds. The obtained samples were investigated by metallographic, microprobe and X-ray analysis methods; their hardness, microhardness, abrasion resistance, density, porosity and bending strength were measured by standard methods. The studies found that metallic bundles for diamond-slitting wheels with different mechanical properties may be manufactured by combination of standard matrix materials. The bundles, obtained by combination of matrix materials V24 + BD126 consist of solid solution of Cu, α-Co and β-Co. The bundles, obtained by combination of matrix compositions NDR + WC + V24, consist of a solid solution of Cu, WC and intermetallic Cu13.7Sn, Fe4Co and Co3Fe7. Study of strength properties of diamond containing bundle segments found the following peculiarities: diamond introduction in bundles V24 + BD126 leads to their strength reduction due to additional stress concentrators; diamond introduction in bundle NDR + WC + V24 does not reduce the bundle strength due to a large number of tungsten carbide grains. Studying of fractures of diamond containing segments defined that the break nature is on a bundle, wherein the diamond grains do not break down. |
Ключевые слова | Diamond tools, bundle, hardness, diamond grinding powder, marble, cutting |
Библиографический список | 1. Nojkina A. V., Laptev A. I., Ermolaev A. A. Influence of synthesis and composition conditions on strength characteristics of synthetic carbonado-type diamonds. High Pressure Research. 2002. Vol. 22. pp. 545–549. 2. Elyutin A. V., Laptev A. I., Manukhin A. V., Sannikov D. S., Kryukova L. M. Sintez polikristallicheskikh almazov “karbonado” iz pirografita (Synthesis of carbonado-type polygraphite polycrystalline diamonds). Doklady Rossiyskoy Akademii Nauk = Reports of Russian Academy of Sciences. 2001. Vol. 378, No. 6. pp. 1–6. 3. Laptev A. I., Atabiev R. Kh., Polushin N. I., Elyutin A. V., Perfilov S. A., Tleuzhev A. B., Kushkhabiev A. S. Prochnost almazov pri izgotovlenii burovogo instrumenta (Durability of diamonds during the drilling tool making). Materialovedenie = Inorganic Materials: Applied Research. 2013. No. 7. pp. 40–43. 4. Lin I. C., Lin C. J., Tuan W. H. Diffusion coefficient of carbon in Fe – Ni alloy during synthesis of diamond under high temperature and high pressure. Ceramics International. 2013. Vol. 39, No. 8. pp. 8861–8864. 5. Sumiya H. HPHT synthesis of large, high-quality, single crystal diamonds. Comprehensive Hard Materials. 2014. No. 3. pp. 195–215. 6. Bugakov V. I., Elyutin A. V., Karavaev K. M., Laptev A. I., Polushin N. I. Novyy tip svyazok na osnove nikelya, legirovannogo dibоridami titana i khroma, dlya almaznogo kamnerazrushayushchego instrumenta (New type of bundles, based on nickel, alloyed by titanium and chromium dibоrides for diamond stone-cutting tool). Izvestiya vuzov. Tsvetnaya metallurgiya = Russian Journal of Non-Ferrous Metals. 1998. No. 5. pp. 61–68. 7. Sidorenko D. A., Zaitsev A. A., Levashov E. A., Kurbatkina V. V., Loginov P. A., Rupasov S. I., Kirichenko A. N., Andreev V. A. Interaction of diamond grains with nanosized alloying agents in metal-matrix composites as studied by raman spectroscopy. Diamond and Related Materials. 2013. Vol. 38. pp. 59–62. 8. Sidorenko D. A., Zaitsev A. A., Kurbatkina V. V., Levashov E. A., Sevas, tyanov P. I., Andreev V. A., Rupasov S. I. Influence of additives of carbon nanotubes on the structure and properties of metal binders for a diamond tool. Russian Journal of Non-Ferrous Metals. 2013. Vol. 54, No. 6. pp. 527–531. 9. Zaitsev A. A., Sidorenko D. A., Levashov E. A., Kurbatkina V. V., Rupasov S. I., Andreev V. A., Sevast, yanov P. V. Development and application of the Cu – Ni – Fe – Sn-based dispersion-hardened bond for cutting tools of superhard materials. Journal of Superhard Materials. 2012. Vol. 34, No. 4. pp. 270–280. 10. Tokova L. V., Zaitsev A. A., Kurbatkina V. V., Levashov E. A., Sidorenko D. A., Andreev V. A. The features of influence of ZrO2 and WC nanodispersed additives on the properties of metal matrix composite. Russian Journal of Non-Ferrous Metals. 2014. Vol. 55, No. 2. pp. 186–190. 11. Andreev V. A., Gureev A. I., Sevastyanov P. I., Loginov V. I., Levashov E. A., Loginov P. A., Rupasov S. I., Kurbatkina V. V. Osobennosti vliyaniya nanomodifitsirovaniya i makrostrukturirovaniya na svoystva svyazki Fe – Mo dlya almaznogo instrumenta (Peculiarities of nanomodification and macrostructuring influence on the properties of Fe – Mo bundle for diamond tool). Izvestiya vuzov. Poroshkovaya metallurgiya i funktsionalnye pokrytiya = Proceedings of Higher Schools. Powder Metallurgy and Functional Coatings. 2013. No. 3. pp. 82–91. 12. Loginov P. A., Kurbatkina V. V., Levashov E. A., Lopatin V. Yu., Zaytsev A. A., Sidorenko D. A., Rupasov S. I. Osobennosti vliyaniya nanomodifitsirovaniya na svoystva svyazki Cu – Fe – Co – Ni dlya almaznogo instrumenta (Peculiarities of nanomodification influence on the properties of Cu – Fe – Co – Ni bundle for diamond tool). Izvestiya vuzov. Poroshkovaya metallurgiya i funktsionalnye pokrytiya = Proceedings of Higher Schools. Powder Metallurgy and Functional Coatings. 2014. No. 2. pp. 23–31. 13. Bugakov V. I., Laptev A. I., Polushin N. I., Bocharov M. V., Sorokin M. N. Metodika otsenki iznosostoykosti svyazok almaznogo instrumenta (Method of assessment of wear-resistance of diamond tool bundles). Materialovedenie = Inorganic Materials: Applied Research. 2004. No. 2. pp. 24–28. 14. ISO 4499-1:2008. Splavy tverdye. Metallograficheskoe opredelenie mikrostruktury. Chast 1. Mikrofotosnimki i opisanie (ISO 4499-1:2008. Hardmetals. Metallographic determination of microstructure. Part 1: Photomicrographs and description). (in Russian) |
Language of full-text | русский |
Полный текст статьи | Получить |