Журналы →  Gornyi Zhurnal →  2015 →  №2 →  Назад

DEVELOPMENT OF DEPOSITS
Название Features of selective extraction technology for thin ore bodies in underground mines of Priargunsky Industrial Mining and Chemical Union
DOI 10.17580/gzh.2015.02.06
Автор Isiyanov O. A., Silkin A. A., Rubtsov S. K., Seleznev A. V.
Информация об авторе

Author 1:
Name & Surname: Isiyanov O. A.
Company: Priargunsky Industrial Mining and Chemical Union (Krasnokamensk, Russia)
Work Position: Head of Engineering Office

 

Author 2:
Name & Surname: Silkin A. A.
Company: VNIPIpromtekhnologii JSC (Moscow, Russia)
Work Position: Head of laboratory
Scientific Degree: Candidate of Engineering Sciences

Contacts: e-mail: Silkin.A.A.@vnipipt.ru

 

Author 3:
Name & Surname:  +Rubtsov S. K.
Company: VNIPIpromtekhnologii JSC (Moscow, Russia)
Work Position: Principal Researcher
Scientific Degree: Doctor of Engineering Sciences

 

Author 4:
Name & Surname: Seleznev A. V.
Company: VNIPIpromtekhnologii JSC (Moscow, Russia)
Work Position: Head of Research Department
Scientific Degree: Candidate of Engineering Sciences

Реферат

the related substantiation of rational groups of small-size equipment and selective ore breaking and excavation aimed at minimization of ore dilution, increase in price of marketable uranium ore as compared with breaking-out in bulk and, thus, satisfactory efficiency of mining of ore bodies less than 1.5 m thick. Based on the analysis of small-size drilling units and load-haul-dumpers, which are in operation in mines and manufactured by various plants, five alternatives of machine grouping are offered for operation in various cross-section stopes and in various working conditions, and the optimum machine group is selected by the criteria of productivity, reliability and cost. Technologies of selective drilling-and-blasting, actual mining and separate ore and barren rock haulage are described. Aiming at higher efficient selective mining of thin ore bodies, the article makes recommendations on: flow chart of scenarios of selective breaking and mining of ore and barren rocks; improved alternatives of downward horizontal slicing with shothole blasting and solidifying backfilling; mining method for thin veins with selective extraction of ore by short vertical cuts (columns) with shothole blasting and barren rock shrinkage in mined-out area. Economical evaluation of crude and high-grade ore extraction from thin ore bodies is given with regard to the recommended technological innovations.

Ключевые слова Streltsovsk uranium ore field, thin ore bodies selective and bulk mining, stopes, small-size drilling and load-haul-dump machines, mining methods and technologies, economic evaluation
Библиографический список

1. Shurygin S. V., Belousov A. S., Alekseev O. N. Sovershenstvovanie sistem razrabotki malomoshchnykh rudnykh tel v Otkrytom Aktsionernom Obshchestve «Priargunskoe proizvodstvennoe gorno-khimicheskoe obedinenie» (Improvement of systems of low-capacity ore bodies' mining at JSC «Priargunsky Industrial Mining and Chemical Union»). Gornyi Zhurnal = Mining Journal. 2013. No. 8(2). pp. 19–21. 

2. Agoshkov M. I. Konstruirovanie i raschet sistem i tekhnologiy razrabotki rudnykh mestorozhdeniy (Construction and calculation of systems and technologies of ore deposit development). Moscow : Nedra, 1965. 220 p. 

3. Standart predpriyatiya STO 07621060-056-2012. Sistema razrabotki «Gorizontalnye sloi s tverdeyushchey zakladkoy» (Standard of enterprise STO 07621060-056-2012. Development system «Horizontal layers with solidifying slope»). Krasnokamensk : JSC «Priargunsky Industrial Mining and Chemical Union», 2012. 88 p. (in Russian).

4. Tekhnologicheskiy reglament TR 07621060-09-2012. Vedenie ochistnykh rabot v usloviyakh podzemnykh rudnikov (Technological regulations TR 07621060-09-2012. Stoping in the conditions of underground mines). Krasnokamensk : JSC «Priargunsky Industrial Mining and Chemical Union», 2012. 57 p. (in Russian).

Language of full-text русский
Полный текст статьи Получить
Назад