Журналы →  Chernye Metally →  2015 →  №1 →  Назад

Development of metallurgy in Russia and CIS
Название Brief review of the development of cutting tools
Автор A. G. Zhurilo, D. Yu. Zhurilo, A. V. Rudnev
Информация об авторе

Kharkov Polytechnical Institute (Kharkov, Ukraine):

Zhurilo A. G., Cand. Eng., Ass. Prof., e-mail: zhurilo.alla@ukr.net
Zhurilo D. Yu., Cand. Eng., Ass. Prof, e-mail: zhurilo.d@yandex.ru
Rudnev A. V., Scientific Fellow

Реферат

The first cutting tools made of diff erent alloys have been examined. The modern classification of cutting materials is presented. It is described how machine-building as the individual industrial branch was established as a result of creation of a steam machine. It was accompanied by elevation of consumption of metal products not only for individual customers, but also for satisfaction of industrial demands. In its turn, it has caused strong increase of demand for metal and has led to development of turning technologies, appearance of weaving, forging, pressing and other equipment. Different steels were required for these purposes, i.e. steels for cutting tools. Improvement of properties of these steels stipulated severe decrease of cost of mechanical processing and to substantial expanding of usage of this material in machine-building and other industries.

Ключевые слова Cutting tools, cutting materials, steel, hard alloys, properties, development, classifi cation, machine-building, requirements
Библиографический список

1. Oseledchik B. M. I. I. Polzunov — izobretatel pervogo v mire teplovogo dvigatelya (I. I. Polzunov – inventor of the first heat-engine in the world). Sverdlovsk : Sverdlovsk Oblast State Publishing House, 1950. 70 p.
2. Danilevskiy V. V. I. I. Polzunov. Trudy i zhizn (I. I. Polzunov. Works and life). Moscow : USSR Academy of Sciences, 1940. 402 p.
3. Tovazhnyanskiy L. L., Lisachuk G. V., Sheptun I. M. Fotoalbom «Natsionalnyy tekhnicheskiy universitet «Kharkovskiy politekhnicheskiy institut» (Photograph album “National Technical University “Kharkiv Polytechnical Institute”). Kharkiv : National Technical University “Kharkiv Polytechnical Institute”, 2005. 212 p.
4. Malyshev V. I. Ocherki istorii nauki o rezanii materialov (Essays of the history of materials` cutting science). Tolyatti : Tolyatti State University, 2011. 215 p.
5. Samarin A. M. Elektrometallurgiya (Electrometallurgy). Moscow : State Publishing House of Ferrous and Non-Ferrous Metallurgy Literature, 1943. 516 p.
6. Knabbe V. S. Sovremennye mashinostroitelnye zavody i primenyaemye imi novye sposoby kholodnoy obrabotki metallov (Modern machinebuilding plants and their applied new methods of cold metal working). Kharkiv : Zilberberg i synovya, 1910. 286 p.
7. Flerov A. V. Materialovedenie i tekhnologiya khudozhestvennoy obrabotki metallov (Material science and technology of artistic metal working). Moscow : Vysshaya shkola, 1981. 267 p.
8. Gavrilenko A. P. Mekhanicheskaya tekhnologiya metallov. Chast 4 (Mechanical technology of metals. Part 4). Moscow : State Technical University, 1925. 340 p.
9. Armstrong A. Modern tool steels and high-speed tool alloys. Engineer Magazine. 1913. No. 9/10.
10. Rudnev A. V. Vladimir Sergeevich Knabbe i ego trud «Freza i ee rol v mashinostroenii» (Vladimir S. Knabbe and his proceeding “Cutter and its role in machine building”). Vestnik Natsionalnogo Technicheskogo Universiteta «Kharkovskiy Politekhnicheskiy Institut» = Bulletin of National Technical University “Kharkiv Polytechnical Institute”. 2013. Iss. 83. pp. 248–254.
11. Rolshchikov B. Mirovoe proizvodstvo elektrostali (Global production of electric steel). Vestnik metallopromyshlennosti = Bulletin of metal industry. 1929. No. 1. pp. 159–160.

Language of full-text русский
Полный текст статьи Получить
Назад