Журналы →  Non-ferrous Metals →  2014 →  №1 →  Назад

BENEFICATION
Название Use of pneumatic columnar flotation machines in the process of concentration of refractory copper-zinc ores, copper ores and zinc cakes
Автор Panshin A. M., Maltsev V. A., Viduetskiy M. G., Purgin A. P., Garifulin I. F.
Информация об авторе

“Ural Mining and Metallurgical Company — Holding” LLC, Verkhnyaya Pyshma:

A. M. Panshin, Technical Director

 

Institute of Materials Sciences and Metallurgy (Ural Federal University named after the First President of Russia B. N. Yeltsin), Ekaterinburg, Russia:

V. A. Maltsev, Director

M. G. Viduetskiy, Counselor of Director, Head of Education-Science Information Center

A. P. Purgin, Chief Specialist

I. F. Garifulin, Chief Specialist, e-mail: igor.garifulin@mail.ru

Реферат

Design of ejecting units of columnar flotation machines CFM (КФМ) provides the process of intensive mixing of pulp by finest pressure gas bubbles, which makes it possible to do the following operations:
— efficient depressing of pyrrhotite and flotation varieties of pyrite during the concentration of copper-zinc ores and copper ores;
— acceleration of the process of dissolution of sulphate forms of zinc during the flotation of zinc cakes.
During the concentration of complex pyrrhotite-containing copper-zinc ore, the industrial machines CFM-1400M (КФМ-1400М) operated as high-efficient flotation apparatuses, which simultaneously accelerate the flotation of copper and zinc minerals, and depress the pyrrhotite. For the two-year period of CFM exploitation, there was a success in increasing of copper extraction from ore (by 3.4%), and zinc extraction from ore (by 5.5%) with simultaneous increasing of quality of copper concentrate (by 3% of Cu) and zinc concentrate (by 1.5% of Zn). Introduction of CFM-1400M made it possible to remove 12 chambers of mechanical flotation machines from exploitation (the total space of chambers is 30 m3, and the total power is 120 kW/hour). During the concentration of complex pyritic copper ore, the introduction of flotation machines CFM-1400M (due to suppression of flotation-active varieties of pyrite and decreasing of circulating loads) provided the increasing of total extraction of copper by 1.5% and increasing of copper content in the concentrate by 1%. According to results of pilot testings of zinc cakes’ flotation on the pilot apparatus of CFM-180 (in comparison with mechanic flotation machines), there were obtained the higher concentration indices with higher specific capacity of initial feed (by 4 times) and foam product (by 3 times). Results of testings make it possible to recommend the industrial machines CFM during the processing of zinc cakes. At the same time, technical and economic indices of zinc cake processing are increased due to decreasing of flotation costs and further Waelz process costs.

Authors express their sincere gratitude to the participants in this work: D. L. Tropnikov (Executive Officer of “Svyatogor” JSC); A. A. Bondarev (Chief Dresser of “Svyatogor” JSC); V. M. Sokolov (Councilor of Executive Officer of “Svyatogor” JSC); P. A. Kozlov (Head of Engineering Center of “Chelyabinsk Zinc Plant” JSC).

Ключевые слова Flotation, pneumatic flotation machines CFM, ejecting units, pyrrhotite, pyrite, copper-zinc ore, zinc cakes, experimental-industrial testings
Библиографический список

1. Garifuli n I. F., Viduetskiy M. G., Maltsev V. A. Flotatsionnaya kolonnaya pnevmaticheskaya mashina (Flotation columnar pneumatic machine). Patent RF, No. 2281169 С2. Applied : December 6, 2004. Published : August 10, 2006.
2. Flotatsionnaya pnevmaticheskaya mashina (Flotation pneumatic machine). International patent No. WO 2006/061265 А1.
3. Viduetskiy M. G., Garifulin I. F., Maltsev V. A. Flotatsionnaya pnevmaticheskaya kolonnaya mashina (Flotation pneumatic columnar machine). Patent RF, No. 2441707 С2. Applied : March 3, 2010. Published : February 10, 2012.
4. Maltsev V. A, Viduetskiy M. G., Garifulin I. F., Topaev G. D. Kontseptsiya razvitiya kolonnykh flotomashin (Concept of development of columnar flotation machines). Gornyi Zhurnal — Mining Journal. 2008. No. 6.
5. Klebanov O. B., Shubov L. Ya., Shcheglova N. K. Spravochnik tekhnologa po obogashcheniyu rud tsvetnykh metallov (Reference book of technologist on concentration of non-ferrous metals’ ores). Moscow : Nedra, 1974. 311 p.
6. Abdrakhmanov I. A., Yagudin R. A., Zimin A. V. et al. Gornyi Zhurnal — Mining Journal. 2010. No. 10. pp. 47–51.
7. Polkin S. I., Adamov E. V., Kovachev K. P., Semkov N. I. Tekhnologiya obogashcheniya rud tsvetnykh metallov (Technology of concentration of non-ferrous metals’ ores). Moscow : Nedra, 1979. 180 p.
8. Abramov A. A. Tekhnologiya pererabotki i obogashcheniya rud tsvetnykh metallov (Technology of processing and concentration of non-ferrous metals’ ores). Moscow : Moscow State Mining University, 2005. Book 2, Vol. 3. pp. 277–279.
9. W. Kreiglctein. Higher yield at lower gosts. Metals & Mining. 2009. No. 1.
10. Geykhman V. V., Kazanbaev L. A., Kozlov P. A. et al. Tsvetnye Metally — Non-ferrous metals. 2000. No. 5. pp. 32–34.
11. Geykhman V. V., Kazanbaev L. A., Kozlov P. A. et al. Tsvetnye Metally — Non-ferrous metals. 2003. No. 1. pp. 29–32.
12. Panshin A. M., Garifulin I. F., Maltsev V. A., Viduetskiy M. G., Purgin A. P. Otsenka vliyaniya tekhnologicheskikh faktorov na skorost flotatsii sulfidnoy chasti tsinkovykh kekov (Assessment of influence of technological factors on the rate of flotation of sulphi de part of zinc cakes). Gornyi Zhurnal — Mining Journal. 2013. No. 7.

Language of full-text английский
Полный текст статьи Получить
Назад