Журналы →  Tsvetnye Metally →  2014 →  №4 →  Назад

ECONOMICS AND MANAGEMENT OF PRODUCTION
Название Technology of production of Cu/C nanocomposite: technical and economic assessment and definition of market value
Автор Kiselev B. G., Kozhitov L. V., Kozlov V. V., Muratov D. G., Makhanova O. V.
Информация об авторе

“SPONK” JSC1, Moscow, Russia; National University of Science and Technology “MISiS”2, Moscow, Russia:

Kiselev B. G., Chief Executive Officer1, Assistant Professor of a Chair of Applied Economics2, phone: +7 (495) 950-48-55


National University of Science and Technology “MISiS”, Moscow, Russia:
Kozhitov L. V., Professor

Makhanova O. V., Economist, Graduate of a Chair of Applied Economics

 

A. V. Topchiev Institute of Petrochemical Synthesis of Russian Academy of Sciences, Moscow, Russia:
Kozlov V. V., Leading Researcher
Muratov D. G., Senior Researcher

Реферат

Methods of manufacturing of Cu/C nanocomposite, which have various spheres of application, were developed in National University of Science and Technology “MISiS”. With a view of commercialization of manufacturing methods, there was held the project feasibility study of Cu/C nanocomposite manufacturing and its market value reckoning. Manufacturing of Cu/C nanocomposite is an object intellectual property. This article contains the description of key players and long-range forecast of development until 2020. There is shown the structure of Cu/C nanocomposite consumption in different branches. The developed technology makes possible to obtain the considerable output volume without losses of unique properties. The range of Cu/C nanocomposite is various. Obtaining of Cu/C nanocomposite tests' specimen in laboratory conditions makes it possible to organize the experimental service of Cu/C nanocomposite with further researching. The feasibility study of Cu/C nanocomposite was made for the cash flow valuation.
This project has the following financial activities:
— output volume in value terms, equal to 31.5 mln. rub. per year;
— total costs, equal to 20.1 mln. rub.;
— net profit, equal to 5.1 mln. rub.;
— product profitability on net profit, equal to 25.5%;
— manufacturing profitability, equal to 60.5%;
— cost per ruble of sales, equal to 0.64 rub. / rub.
The market value of this technology was found by profitable and cost-based methods. The market value, calculated by the cost-based method, was 4.55 mln. rub.; while the market value, calculated by the profitable method, was 1.55 mln. rub. The calculations have shown, that during the manufacturing of nanocomposite by the developed technology (5% of Russian market of nanocomposites), the market value of manufacturing technology is 4 mln. rub. Adoption of this technology on experimental service is efficient, profitable and reasonable.

Ключевые слова Nanotechnology, nanocomposites, nanomaterials market, feasibility studies, market value, cost and market approaches
Библиографический список

1. Mezhdunarodnaya komissiya po razrabotke razdela EOLSS 6.152 “Nanonauka i nanotekhnologii” (International committee on development of section EOLSS 6.152 “Nanoscience and nanotechnologies”). Available at: http://www.m-press.ru/nano/index.html.
2. Global Markets for Nanocomposites, Nanoparticles, Nanoclays, and Nanotubes. Published : January 2012. Available at : http://www.bccresearch.com/report/ nanocomposites-globalmarkets-nan021e.html.
3. Muratov D. G. Razrabotka osnov tekhnologii polucheniya uglerodnogo nanokristallicheskogo materiala i metallouglerodnykh nanokompozitov na osnove poliakrilonitrila i soley metallov (Cu, Fe, Co) : dissertatsiya ... kandidata tekhnicheskikh nauk (Development of basis of technology of obtaining of carbonic nanocrystal material and metal-carbonic nanocomposites on the basis of polyacrylonitrile and salts of metals (Cu, Fe, Co) : Dissertation … of Candidate of Engineering Sciences). Moscow, 2008. 163 p.
4. Zemtsov L. M., Karpacheva G. P., Efimov M. N., Muratov D. G., Bagdasarova K. A. Vysokomolekulyarnye soedineniya A — Polymer Science A. 2006. Vol. 48, No. 6. pp. 977–982.
5. Metodicheskie rekomendatsii po planirovaniyu, formirovaniyu i uchetu zatrat na proizvodstvo i realizatsiyu produktsii (rabot, uslug) predpriyatiy metallurgicheskogo kompleksa (Methodical recommendations on planning, formation and accounting of costs on production and realization of products (works, services) of metallurgical complex enterprises). Moscow : “Novye vozmozhnosti” LLC, 2004.
6. Kiselev B. G. Ob otsenke rezultatov intellektualnoy sobstvennosti (About assessment of intellectual property results). Sbornik dokladov nauchno-prakticheskogo seminara “Nauchnotekhnologicheskoe obespechenie deyatelnosti predpriyatiya, institutov i firm” (Collection of reports of scientific-practical seminar “Scientific-technological provision of activity of enterprise, institutes and companies”). Moscow : National University of Science and Technology “MISiS”, 2003.
7. Boer F. P. Otsenka stoimosti tekhnologii (Assessment of cost of technology). Moscow : Olip-Business, 2007.
8. Kozhitov L. V., Karpukhin V. V., Kozlov V. V., Karpacheva G. P. Sposob polucheniya termostabilnogo nanokompozita Cu/poliakrilonitril (Method of obtaining of thermostable nanocomposite Cu/polyacrylonitrile). Patent RF, No. 2330864. Applied : August 22, 2007. Published : August 10, 2008.
9. Kiselev B. G. Otsenka tekhnologiy — odin iz elementov kommertsializatsii intellektualnoy sobstvennosti (Assessment of technologies is one of intellectual property commercialization elements). Sbornik tezisov dokladov Mezhdunarodnoy nauchnoprakticheskoy konferentsii “Metallurgiya tsvetnykh metallov. Problemy i perspektivy” (Collection of thesis of reports of International Scientific-Practical Conference “Metallurgy of non-ferrous metals. Problems and prospects”). Moscow : National University of Science and Technology “MISiS”, 2009.

Language of full-text русский
Полный текст статьи Получить
Назад