Журналы →  Non-ferrous Мetals →  2013 →  №1 →  Назад

CONCENTRATION TECHNOLOGY
Название Development of schematic designs during the processing of copper-molybdenum ores by the example of Erdenet Mining Corporation
Автор Ganbaatar Z., Nazarov Yu. P., Polyanskiy M. V.
Информация об авторе

Erdenet Mining Corporation, Erdenet, Mongolia:

Ganbaatar Z., Deputy Chief Executive Officer on Development, Candidate of Engineering Sciences, phone: +976 (0) 13-52-73-501

 

Scientific and Production Association "RIVS" JSC, Saint Petersburg, Russia:

Nazarov Yu. P., Leading Researcher, Candidate of Engineering Sciences

Polyanskiy M. V., Director on Construction and Reconstruction of Concentration Plants

E-mail (common): rivs@rivs.ru

Реферат

The concentration plant of Erdenet Mining Corporation (Mongolia) has been successfully exploiting the two-stage scheme of concentration of copper-molybdenum ores during 30 years. This scheme includes three consecutive stages: bulk cycle, finishing cycle and molybdenum cycle. Considering the manufacturing reconstruction process, one of landmark components is the formation of technological schemes with the following substantiation of the scheme of apparatuses` series. The task for the operating manufactures became more complex, because of the necessity of adaptation of the developed scheme of apparatuses` series to the existing production spaces. For example, the schemes of apparatuses` series are considerably rigid structures, created for the specific type of supplied raw materials. At the same time, increasing of productivity of existing enterprises foreordains the involving of ores, supplied from various parts of ore body, into the synchronous processing. These ores differ by the content of mineral resources, ratio of primary and secondary minerals, oxidation level, slags content, etc. All these factors provide the creation reasonability of schemes with increased technological flexibility, which makes possible rather efficient responding on the changing of properties of the delivered raw materials.

Ключевые слова Copper-molybdenum ores, flotation, bulk cycle, selection, concentrates, reconstruction, flotation machines, productivity
Библиографический список

1. Ganbaatar Z., Nazarov Yu. P., Polyanskiy M. V. Proektnye resheniya pri rekonstruktsii glavnogo korpusa Kompanii s Ogranichennoy Otvetstvennostyu «Predpriyatie «Erdenet» s primeneniem oborudovaniya Nauchno-proizvodstvennogo Obedineniya «RIVS» (Project decisions at reconstruction of main building of Erdenet Mining Corporation, with application of equipment of Scientific and Production Association "RIVS"). Gornyi Zhurnal — Mining Journal, 2010, Special issue, pp. 87–92.
2. Baatarkhuu Zh. Tekhnologiya obogashcheniya medno-porfirovykh rud na osnove izucheniya ikh genetikomorfologicheskikh osobennostey (Concentration technology of copper-porphyritic ores, on the basis of the research of their genetic and morphological features). Erdenet : MAMBKh-MMRA Publ., 2006.
3. Mineralnoe syre. Molibden (Mineral raw materials. Molybdenum). Publishing House of the Ministry of Nature of Russian Federation, 1987.
4. Ganbaatar Z., Baatarkhuu Zh., Gezegt Sh., Tuyaa Ts., Sataev I. Sh. Sovershenstvovanie tekhniki i tekhnologii obogashcheniya medno-molibdenovykh rud na obogatitelnoy fabrike «Erdenet» (Improvement of technics and technology of concentration of copper-molybdenum ores on Erdenet Mining Corporation). Gornyi Zhurnal – Mining Journal, 2008, Special issue, pp. 25–27.

Language of full-text английский
Полный текст статьи Получить
Назад