“Non-ferrous Metals” is the leading Russian scientific-technical journal in English devoting to all problems of non-ferrous metallurgy (heavy metals, rare metals, light metals, noble metals, carbon materials, metal processing etc).

Way of the journal distribution - free access to the papers, published with article processing charge (APC).

The mission of this edition is to make foreign specialists aware about scientific and technical researches and development in non-ferrous metals industry in the former USSR countries.

Published since 2001, volume up to 84 pages, circulation up to 30 copies. ISSN 2072-0807.

Its thematic plan covers all directions of scientific and technical development in non-ferrous metallurgy. The main journal sections include scientific-technical papers on heavy and light non-ferrous metals, noble metals and alloys, rare and rare earth metals, carbon materials, composites and multi-functional coatings, radioactive elements, nanostructured metals and materials, metal forming, automation etc. Theoretical and practical problems of ore mining and mineral processing, production and processing of non-ferrous metals, complex usage of ores, economics and production management, automation of metallurgical processes are widely observed in this journal.

"Non-ferrous Metals" journal publishes the papers of well-known scientists and leading metallurgists, elucidates important scientific-technical problems of development of concentrating and metallurgical enterprises, scientific-research institutes and universities in the field of non-ferrous metallurgy, presents new scientific directions and technical innovations in this area. The readers can find in this journal both the articles with applied investigations and with results of fundamental researches that make the base for new technical developments.

"Non-ferrous Metals" is an expert peer-review edition; its editorial board incorporates leading and respectable scientists and practical specialists of non-ferrous metallurgy; it provides excellent expertise of published articles.

Actual address: Office 624, Leninsky prospekt 6, bld. 2
(Moscow Institute of steel and alloys, bld. A), Moscow, 119049 Russia
Mailing address: P.O. Box No. 71, Moscow, 119049, Russia
Phone / Fax: +7-495-955-01-75, +7 (926) 504-8975
E-mail: tsvetmet@rudmet.ru
Internet: www.rudmet.ru

Founder:
“Ore and Metals” Publishing House

Editor-in-Chief – Alexander G. Vorobiev

Deputy Editor-in-Chief – Alexander P. Tyukin

Executive Editor – Andrey A. Vorobyev

Editorial board:

Akchurin R. Kh., D. Eng., Prof., Lomonosov Moscow State Academy of Fine Chemical Technology, Vladivostok, Russia;

Basov A. A., C. Eng., RSC Energia, Korolyev, Russia;

Belov N. A., D. Eng., Prof., National Reshearch Technological University "MISiS", Moscow, Russia;

Belousova N. V., D. Chem., Prof., Siberian Federal University, Krasnoyarsk, Russia;
Boyarko G. Yu., D. Ec., Prof., Tomsk Polytechnic University - National Research University of Resource-Efficient Technologies, Tomsk, Russia;

Brichkin V. N., D. Eng., Prof., National Mineral Resources University, Saint Petersburg, Russia;

Deev V. B., D. Eng., Prof., National Reshearch Technological University "MISiS", Moscow, Russia;

Dli M. I., D. Eng., Prof., Branch of the National Research University “Moscow Power Engineering Institute”, Smolensk, Russia;

Drits A. M., C. Eng., "Samara Metallurgical Plant" JSC, Moscow, Russia;

Ignatkina V. A., D. Eng., Prof., National Reshearch Technological University "MISiS", Moscow, Russia;

Kirov S. S., C. Eng., Assist. Prof., National Reshearch Technological University "MISiS", Moscow, Russia;

Kiselev B. G., C. Ec., "SPONK" Designing and Consulting Company, National University of Science and Technology «MISiS», Moscow, Russia;
Korneev S. I., C. Ec., Editor of the Section Economics and Management of Production ("Tsvetnye Metally" Journal), Moscow, Russia;

Kotlyar B. A., C. Ec., "TsNOTORGMET" Consulting-Analytical Center, Moscow, Russia;

Kryukovskii V. A., D. Eng., Prof., «RUSAL Global Management B. V.» JSC, Moscow, Russia;

Lebed A. B., D. Eng., Senior Scientific Researcher, UMMC Technical University, Ekaterinburg, Russia;

Levashov E. A., D. Eng., Academician of Russian Academy of Natural Sciences, Prof., National Reshearch Technological University "MISiS", Moscow, Russia;

Levinskiy Yu. V., D. Eng., Prof.,Lomonosov Moscow State Academy of Fine Chemical Technology, Moscow, Russia;

Maltsev N. E., C. Eng., JSC «Soyuztsvetmetavtomatika», Moscow, Russia;

Mamyachenkov S. V., D. Eng., Ural Federal University, Yekaterinburg, Russian;

Matveeva T. N., D. Eng., Research Institute of Comprehensive Exploitation of Mineral Resources of Russian Academy of Sciences, Moscow, Russia;

Meretukov M. A., D. Eng., Professor, Scientific Consultant, Prague, Czech Republic;

Nemchinova N. V., D. Eng., Prof., Head of the Department of Non-Ferrous Metallurgy, Irkutsk National Research Technical University (INRTU), Irkutsk, Russia;

Nikitin K. V., D. Eng., Prof, Samara Polytech, Samara Russia; 

Nikolaev A. I., D. Eng., Prof., I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Scientific Center of Russian Academy of Sciences), Center of Nanomaterials of Kola Scientific Center of Russian Academy of Sciences, Apatity, Russia;

Ptitsyn A. N., D. Eng., Prof., National University of Science and Technology "MISIS", Moscow, Russia;

Safin F. M., D. Eng., C. Philosph., Prof., Kazan State University of Culture and Arts, Kazan, Russia;

Seleznev A. N., D. Eng., Prof., JSC "Rubin Aviation Company", Moscow, Russia;

Sergeev I. B., D. Ec.., Prof., RANEPA St. Petersburg,  Saint Petersburg, Russia

Shapirovskiy M. R., C. Eng., JSC «Soyuztsvetmetavtomatika», Moscow, Russia;

Sulitsin A. V., D. Eng., Acc. Prof., Ural Federal University, Yekaterinburg, Russian Federation;

Syrkov A. G., D. Eng., Prof.,  National Mineral Resources University, Saint Petersburg, Russia;

Tsemekhman L. Sh., D. Eng., Prof., Independent Expert, Saint Petersburg, Russia;
Tsymbulov L. B., D. Eng., Prof., "Gipronickel" State Scientific-Research and Desifning-Engineering Institute of Nickel and its Products, Saint Petersburg, Russia;

Tyukin A. P., C. Eng., Kola Mining and Metallurgical Company, Monchegorsk, Russia;
Voldman G. M., D. Ch., Prof., Moscow Institute of Fine Chemical Technology, Chair of Chemistry and Technology of Nano-sized and Composite Materials, Moscow, Russia;

Vorobiev A. G., D. Ec., "Ore and Metals" Publishing House, Moscow, Russia;
Vorobyev A. A., C. Phliosoph., Executive Editor, "Ore and Metals" Publishing House, Moscow, Russia;

Zinoviev A. V., D. Eng., Prof., National Research Technological University "MISiS", Moscow, Russia.

Foreign members of the editorial board:
Prof. Evgeny Jak, "Pyrosearch" Metallurgical Center, University of Queensland (Brisbane, Australia);
Dr. Kari Knuutila, Senior Vice President and Chief Technological Officer, Outotec Oyj, Finland;
Prof., Dr-Ing. Bernd Friedrich, Director of IME Process Metallurgy and Metal Recycling, Department and Chair of RWTH Aachen, Germany;
Prof., Dr. Zh. Baatarkhuu, Deputy Chief of Production and Technical Department, Chief Preparator of Erdenet (Mongolia);

Dr. Eng.  K. Ya. Dedelyanova, Chairman, The Scientific and Technical Union of Mining, Geology and Metallurgy, Bulgaria;

Dr. Eng. Vladimir V. Genevski, Vice-Chairman, The Scientific and Technical Union of Mining, Geology and Metallurgy, Bulgaria.

Topic themes:

- Economics of nonferrous metallurgy;
- Beneficiation;
- Heavy nonferrous metals;
- Noble metals and alloys;
- Light metals, carbon materials;
- Rare metals, semiconductors;
- Composite materials and multi-functional coatings;
- Radioactive ellemens;
- Nanostructured metals and materials;
- Metal processing;
- Automation;
- Chronicle.