CIS Iron and Steel Review
Smolensk Branch of the National Research University “Moscow Power Engineering Institute” (Smolensk, Russia)
V. I. Bobkov, Dr. Eng., Associate Prof., Head of the Dept. of Higher Mathematics, e-mail: vovabobkoff@mail.ru
M. I. Dli, Dr. Eng., Prof., Head of the Dept. of Information Technologies in Economics and Management, e-mail: midli@mail.ru
V. A. Orekhov, Assistant, e-mail: fundukoff@mail.ru
Plekhanov Russian University of Economics (Moscow, Russia)
N. S. Kulyasov, Cand. Econ., Leading Researcher, Scientific and Methodological Center “Higher School of Tariff Regulation”
Satbaev University (Almaty, Kazakhstan)
N. K. Dosmukhamedov, Cand. Eng., Prof., e-mail: nurdos@bk.ru
E. E. Zholdasbay, Ph. D.
E. B. Tazhiev, Ph. D., Senior Lecturer, e-mail: eleusiz_t1990@mail.ru (Corresponding author)
A. A. Argyn, Ph. D.
Zh. Abishev Chemical and Metallurgical Institute (Karaganda, Kazakhstan)
E. Zh. Shabanov, PhD, Associate Professor, Leading Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: ye.shabanov@gmail.com
Zh. K. Saulebek, Master Eng., Junior Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: zhalgas.saulebek@bk.ru
A. S. Akhmetov, PhD, Senior Researcher, Laboratory of Ferroalloys and Reduction Processes, e-mail: aman1aotero@gmail.com
Research Center “INNTECH” LLP (Karaganda, Kazakhstan)
G. K. Mukhtarkhanova, Head of the Laboratory, e-mail: 32bmifr@mail.ru
I. P. Bardin Central Research Institute of Ferrous Metallurgy (Moscow, Russia)
I. A. Krasnyanskaya*, Cand. Eng., Head of the Laboratory of Complex Chemical Researches, N. P. Lyakishev Scientific Center for Complex Processing of Raw Materials, iakrsn@gmail.com
K. N. Anisimov, Cand. Eng., Head of the Laboratory of Refractory Materials
LLC “Cyberphysics” (Moscow, Russia)
M. P. Gusev, Cand. Eng., Chief Business Development Officer
PAO NLMK (Lipetsk, Russia)
M. G. Moshchenko, Cand. Eng., Head of the Programs, Directorate of Researches and Developments
D. V. Karavaev, Engineer, Directorate of Researches and Developments
* Corresponding author
A. I. Volkov took part in the work
Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia)
V. A. Korovin, Dr. Eng., Prof., Dept. “Metallurgical Technologies and Equipment”, e-mail: v.korovin2015@yandex.ru
I. O. Leushin, Dr. Eng., Prof., Dept. “Metallurgical Technologies and Equipment”, e-mail: igoleu@yandex.ru
Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia)1 ; Kazan Federal University (Kazan, Russia)2
I. P. Balabanov, Cand. Eng., Associate Prof., Dept. “Automation and Management”; Associate Prof., Dept. “Design
and Technology for Machine-building industries” 1,2, e-mail: balabanovip@mail.ru
Kazan National Research Technical University named after A.N. Tupolev – KAI (Kazan, Russia)
I. A. Savin, Cand. Eng., Associate Prof., Head of Dept. “Design and Technology for Machinebuilding industries”, e-mail: savin.ia@kaichelny.ru
National University of Science and Technology «MISIS» (Moscow, Russia)1 ; JSC “Istok ML” (Moscow, Russia)2
S. P. Galkin, Dr. Eng., Prof., Dept. of Metal Forming1,2, e-mail: glk-omd@yandex.ru
Yu. V. Gamin, Cand. Eng., Associate Prof., Dept. of Metal Forming1,2, e-mail: y.gamin@mail.ru
A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of Dept. of Metal Forming1,2, e-mail: judger85@mail.ru
National University of Science and Technology «MISIS» (Moscow, Russia)
T. Yu. Kin, Leading Engineer, Postgraduate Student, Dept. of Metal Forming, e-mail: tatianakin@mail.ru
Research and Development Center “OMD” (Moscow, Russia)
B. V. Karpov, Head of Research and Development Center “OMD”, e-mail: karpov.bv@misis.ru
Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)
M. V. Lukin, Cand. Eng., Associate Prof., e-mail: lukin_mihail_22@mail.ru
A. A. Strekalkin, Cand. Eng., Associate Prof., e-mail: a.a.strekalkin@gmail.com
S. I. Roshchina, Dr. Eng., Prof., Head of Building Structures Dept., e-mail: rsi3@mail.ru
Vladimir State University named after A. G. and N. G. Stoletovs (Vladimir, Russia)1 ; Wuhan Textile University (Wuhan, China)2 ; National University of Science and Technology “MISIS” (Moscow, Russia)3
V. B. Deev, Dr. Eng., Prof., Chief Scientific Researcher1, Professor-expert of the School of Mechanical Engineering and Automation2, Dept. of Metal Forming3, e-mail: deev.vb@mail.ru
National University of Science and Technology “MISIS” (Moscow, Russia)
M. N. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: tfsmn@yandex.ru
V. A. Fadeev, Associate Prof., Dept. of Metal Forming, e-mail: fdv_viktor@mail.ru
M. M. Skripalenko, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: mms@misis.ru
“DKN-T” JSC (Moscow, Russia)
G. P. Zhigulev, Cand. Eng., Associate Prof., e-mail: aldebaran2000@mail.ru
Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia)
V. B. Kuskov, Cand. Eng., Associate Prof., Dept. of Mineral Processing, e-mail: Kuskov_VB@pers.spmi.ru
E. S. Iliin, Ph. D. Student, Dept. of Mineral Processing, e-mail: s235069@stud.spmi.ru
National University of Science and Technology “MISIS” (Moscow, Russia)
A. A. Kazakova, Master Student, Dept. of Physical Metallurgy of Non-ferrous Metals
A. V. Pozdnyakov, Ph. D., Associate Prof., Dept. of Physical Metallurgy of Non-ferrous Metals
V. V. Cheverikin, Ph. D., Leading Researcher, Dept. of Physical Metallurgy of Non-ferrous Metals
A. Yu. Churyumov, Ph. D., Associate Prof., Dept. of Physical Metallurgy of Non-ferrous Metals, e-mail: churyumov@misis.ru
Empress Catherine II Saint Petersburg Mining University (Saint Petersburg, Russia)
A. Yu. Kuzkin*, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Kuzkin_AYu@pers.spmi.ru
D. A. Zadkov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Zadkov_DA@pers.spmi.ru
Novosibirsk State Technical University (Novosibirsk, Russia)
V. Yu. Skeeba, Cand. Eng., Associate Prof., Dept. of Industrial Machinery Design, e-mail: skeeba_vadim@mail.ru
Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1 ; Siberian Federal University (Krasnoyarsk, Russia)2 ; Bauman Moscow State Technical University (Moscow, Russia)3
V. V. Kukartsev, Cand. Eng., Associate Prof., Dept. of Information Economic Systems, Institute of Engineering and Economics1, Dept. of Software Engineering, Institute of Space and Information Technologies2, Artificial Intelligence Technology Scientific and Education Center3, e-mail: vlad_saa_2000@mail.ru
Siberian Federal University (Krasnoyarsk, Russia)1 ; Bauman Moscow State Technical University (Moscow, Russia)2
Ya. A. Tynchenko, Junior Researcher, Lab. of Biofuel Compositions1, Artificial Intelligence Technology Scientific and Education Center2, e-mail: t080801@yandex.ru
* Corresponding author
Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan)
G. S. Yerekeeva, Postgraduate Student, Junior Researcher, “Metallurgy of Steel and material Science” laboratory, e-mail: yerekeyeva.g@mail.ru
G. I. Narikbaeva, Scientific Researcher, “Metallurgical melts” laboratory
I. Ya. Korsukova, Scientific Researcher, “Metallurgical melts” laboratory
National Center on Complex Processing of Mineral Raw Materials of the Republic of Kazakhstan (Almaty, Kazakhstan)
F. R. Kapsalamova, Senior Researcher
Novosibirsk State Technical University (Novosibirsk, Russia)
B. V. Malozyomov*, Cand. Eng., Associate Prof., e-mail: malozyomov@corp.nstu.ru
Reshetnev Siberian State University of Science and Technology (Krasnoyarsk, Russia)1 ; Siberian Federal University (Krasnoyarsk, Russia)2 ; Bauman Moscow State Technical University (Moscow, Russia)3
V. S. Tynchenko*, Cand. Eng., Associate Prof.1,2,3, e-mail: vadimond@mail.ru
Siberian Federal University (Krasnoyarsk, Russia)
V. A. Kukartsev, Cand. Eng., Associate Prof., Polytechnic Institute, e-mail: vkukarstev@sfu-kras.ru
K. A. Bashmur, Senior Lecturer, e-mail: bashmur@bk.ru
T. A. Panfilova, Cand. Eng., Associate Prof., e-mail: tpanfilova@sfu-kras.ru
*Corresponding author
Moscow State University of Civil Engineering (Moscow, Russia)
A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru
A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia)
V. V. Kondratyev, Cand. Eng., Senior Scientific Researcher
Irkutsk National Research Technical University (Irkutsk, Russia)
A. E. Balanovskiy, Cand. Eng., Associate Prof., Head of the Dept. of Material Science, Welding and Additive Technologies
N. A. Astafyeva, Cand. Eng., Associate Prof.
E. A. Yamshchikova, Postgraduate Student
Bauman Moscow State Technical University (Moscow, Russia)
N. V. Krysko, Cand. Eng., Associate Prof., Dept. MT-7 “Welding Tehnology and Diagnostics”, e-mail: kryskonv@bmstu.ru
N. A. Shchipakov, Cand. Eng., Associate Prof., Dept. MT-7 “Welding Tehnology and Diagnostics”, e-mail: shchipak@bmstu.ru
D. M. Kozlov, Cand. Eng., Engineer, e-mail: kozlovdm@bmstu.ru
A. G. Kusyy, Engineer, e-mail: kusyy@bmstu.ru
National University of Science and Technology “MISIS” (Moscow, Russia)
N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: chich38@mail.ru
S. M. Gorbatyuk, Dr. Eng., Prof., Dept. of Engineering Technology Equipment, e-mail: sgor02@mail.ru
A. O. Karfidov, Head of Dept. of Engineering Technology Equipment, e-mail: a.korf@mail.ru
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Engineering Technology Equipment, e-mail: ch-grafika@mail.ru
Russian State Agrarian University – Moscow Timiryazev Agricultural Academy (Moscow, Russia)
O. A. Leonov, Dr. Eng., Prof., e-mail: oaleonov@rgau-msha.ru
N. Zh. Shkaruba, Dr. Eng., Prof., e-mail: shkaruba@rgau-msha.ru
Yu. G. Vergazova, Cand. Eng., Associate Prof., e-mail: vergazova@rgau-msha.ru
Mendeleev University of Chemical Technology (Moscow, Russia)
T. V. Konkova, Dr. Eng., Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: kontat@list.ru
A. M. Gaydukova, Cand. Eng., Associate Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: GaydukovaAM@yandex.ru
E. Yu. Liberman, Dr. Chem., Prof., Dept. “Technology of inorganic substances and electrochemical processes”, e-mail: el-liberman@mail.ru
A. A. Seitkasymova, Postgraduate Student, Dept. “Technology of inorganic substances and electrochemical processes», e-mail: seitkassymovaa@gmail.com