Chernye Metally
The Chernye Metally journal No. 5-2022 was published, which is mainly dedicated to the 30th anniversary of the Novotroitsk branch of NUST «MISiS».
The articles in this section cover the issues of increasing the magnetic properties of weakly magnetic iron ore raw materials, the use of complex modifiers in the production of steel with increased requirements for non-metallic inclusions, improving the technology of late graphitizing modification in the production of thin-walled castings from ductile iron, reengineering of the roller hardening machine of the sheet-rolling shop of JSC «Ural Steel» , the influence of the manufacture of brake discs on residual stresses and vibrations in the «disk-pad» system, as well as the development of a control system for an asynchronous electric motor based on an adaptive model in sheet rolling production.
The next «Preparation of Raw Materials» section will interest readers with an analysis of the formation of the strength of a pelletized multiphase dicalcium silicate sinter, performed by authors from the St. Petersburg Mining University.
The «Rolling» section presents developments implemented at the Novolipetsk and Magnitogorsk Iron and Steel Works.
The same issue contains articles in the «Coating and corrosion protection», «Welding and surfacing», «Machine-building technologies» and «Technological measurements» sections, prepared by specialists from the Naberezhnye Chelny Institute (branch) of Kazan Federal University, Kazan National Research Technological University, Magnitogorsk State Technical University, Kaluga branch of Bauman MSTU and Tula State University.
The journal also publishes a congratulation on the anniversary of Leonid Nikolaevich Shevelev, the chief researcher of the State Scientific Center "TsNIIchermet" named after I. P. Bardin, professor, Doctor of Economic Sciences.
Please find more details below, or order your printed or electronic version of the Journal
| 30 years of the Novotroitsk branch of NUST MISIS | |
| Название | New method to increase magnetic properties of low magnetic iron ore raw materials |
| Авторы | D. R. Ganin, A. A. Panychev, A. Yu. Fuks |
| Информация об авторах | Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia: D. R. Ganin, Cand. Eng., Associate Professor, Dept. of Metallurgical Technologies and Equipment, e-mail: dmrgan@mail.ru |
| Название | Application of complex modifiers in the production of steel with increased requirements for non-ferrous metallic inclusions |
| Авторы | G. A. Kunitsyn, M. S. Kuznetsov, A. N. Shapovalov, I. V. Bakin |
| Информация об авторах | JSC Ural Steel, Novotroitsk, Russia:
Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia:
NPP Tekhnologiya, Chelyabinsk, Russia: |
| Название | Improving the technology of late inoculation in the production of thin-walled castings from ductile iron |
| Авторы | A. A. Tokarev, A. V. Kalyaskin, A. V. Barkhatov, E. V. Bratkovsky |
| Информация об авторах | South Ural State University, Chelyabinsk, Russia: A. A. Tokarev, Postgraduate Student, Dept. of Pyrometallurgical and Foundry Technologies, e-mail: 151@nppgroup.ru
SPE Research and Development Center Ltd., NPP Tekhnologiya Ltd., Chelyabinsk, Russia:
Novotroitsk branch of NUST MISIS, Novotroitsk, Russia: |
| Название | Reengineering of the roller hardening machine of the sheet-rolling shop of JSC Ural Steel |
| Авторы | A. V. Nefedov, A. A. Kitanov, N. A. Chichenev |
| Информация об авторах | Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia: A. V. Nefedov, Cand. Ped., Associate Professor, Deputy Director on Teaching and Guiding, e-mail: cosnovotr@rambler.ru
Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia1 ;JSC Ural Steel, Novotroitsk, Russia2: A. A. Kitanov, Hydraulic Technician of the Sheet Rolling Shop1,2, e-mail: alexalex19-81@mail.ru
National University of Science and Technology “MISiS”, Moscow, Russia |
| Название | Influence of brake disc manufacturing technology on residual stresses and vibrations in the “disk – pad” system |
| Авторы | D. A. Boldyrev, S. P. Nefediev, M. V. Kharchenko, R. R. Dema |
| Информация об авторах | Togliatti State University, Togliatti, Russia:
Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia:
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: M. V. Kharchenko, Cand. Eng., Associate Professor, Dept. of Mechanics, e-mail: kharchenko.mv@bk.ru
Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia1 ; Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia2: |
| Название | Development of a control system for an asynchronous electric motor based on an adaptive model in the conditions of sheet rolling production |
| Авторы | A. V. Tsukanov, K. V. Litsin, S. N. Baskov |
| Информация об авторах | Novotroitsk Branch of NUST MISIS, Orsk, Russia:
2 South Ural State University (National Research University), Chelyabinsk, Russia: |
| Preparation of raw materials | |
| Название | Formation of the strength of pelletized multiphase dicalcium silicate sinter |
| Авторы | A. B. Lebedev, P. V. Musinova |
| Информация об авторах | St. Petersburg Mining University, St. Petersburg, Russia: A. B. Lebedev, Cand. Eng., Scientific Researcher, Resource Processing Research Center, e-mail: 2799957@mail.ru |
| Rolling | |
| Название | Analysis of the influence of technological modes and the state of equipment on the occurrence of vibrations during continuous cold rolling |
| Автор | V. A. Pimenov |
| Информация об авторе | PJSC Novolipetsk Iron and Steel Works, Lipetsk, Russia: V. A. Pimenov, Cand. Eng., Senior Researcher, Head of Technological Projects of the Directorate for the Development of New Process Technologies, e-mail: pimenov_va@nlmk.com |
| Название | Development of a finite element model for calculation of the thermal field of coil rolled products in the thermomechanical process |
| Авторы | D. Yu. Alekseev, A. E. Gulin, D. G. Emaleeva, A. S. Kuznetsova |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: D. Yu. Alekseev, Engineer of the Engineering Center of the Scientific-Innovation Sector |
| Coating and corrosion protection | |
| Название | Vegetable-based steel corrosion inhibitors for the protection of oilfield equipment |
| Авторы | D. D. Fazullin, G. V. Mavrin, L. I. Fazullina, I. G. Shaikhiev, N. M. Lyadov |
| Информация об авторах | Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia: D. D. Fazullin, Cand. Eng., Associate Professor, e-mail: denr3@yandex.ru
Kazan National Research Technological University, Kazan, Russia:
Kazan Zavoisky Physical-Technical Institute, FRC Kazan Scientific Center of the Russian Academy of Sciences, Kazan, Russia1 ; Kazan Federal University, Kazan, Russia2: |
| Welding and surfacing | |
| Название | Investigation of the effect of the slag system of coated electrodes on the efficiency of metal inoculation of a welding bath of low-carbon steel |
| Авторы | M. A. Sheksheev, S. V. Mikhailitsyn, A. B. Sychkov, A. N. Emelyushin |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: M. A. Sheksheev, Cand. Eng., Associate Professor, Dept. of Machines and Technologies of Metal Forming and Mechanical Engineering, e-mail: shecsheev@yandex.ru |
| Mechanical Engineering Technologies | |
| Название | Experimental study of drawing steel square boxes according to the circle-square scheme in radial and conical matrices |
| Авторы | A. N. Malyshev, S. A. Bysov, V. D. Kukhar, Yu. V. Bessmertnaya |
| Информация об авторах | Kaluga branch of Bauman Moscow State Technical University, Kaluga, Russia: A. N. Malyshev, Cand. Eng., Associate Professor, MK Dept. of Machine-Building technologies, e-mail: amalyshev@mpk-kaluga.ru
Tula State University, Tula, Russia: |
| Technological measurements | |
| Название | Application of neural networks for prediction of changes in microhardness in the heat-affected zone of carbon and low-alloy steel sheets after laser cutting |
| Авторы | A. D. Gusev, I. V. Tikhonova, Ya. A. Stakhanova |
| Информация об авторах | Tula State University, Tula, Russia: A. D. Gusev, Postgraduate Student, e-mail: dkines07@gmail.com I. V. Tikhonova, Cand. Eng., Associate Professor, e-mail: tivtihonova@yandex.ru Ya. A. Stakhanova, Graduate Student, e-mail: yana.stakhanova@mail.ru |
