Журналы →  Tsvetnye Metally →  2021 →  №7

Tsvetnye Metally


 

The July issue contains articles covering the journal’s all major sections, including papers contributed by the Siberian Federal University, MISiS, Pacific National University, D. Mendeleev University of Chemical Technology of Russia, Tula State University and others.

 

The Economics and Management of Production section presents a review prepared by Swedish experts who analyzed the current situation with the global consumption of certain high-value natural resources that are used for the production of information and communication technology elements.

 

The Beneficiation section presents a visiometric technique for analyzing the size distribution of crushed ore, the efficiency of which was confirmed through a series of pilot tests. The Heavy Non-Ferrou Metals section looks at the production of highly dispersed metallic nickel particles of a given size, as well as the oxidation kinetics and properties of lead-zinc alloys.

 

Of practical interest is the paper published in the Noble Metals and Their Alloys section that describes the use of non-cyanide reagents to recover gold from the product of pressure oxidation of sulphide concentrates.

The paper included in the Light Metals, Non-Carbon Materials setion describes a study carried out by RUSAL JSC in laboratory conditions that offers a number of advanced solutions on reducing the hydrogen saturation degree of melt aluminium.

 

The Materials Science section looks at the structure and properties of aluminium-nickel-zinc alloys produced by SHS metallurgy, as well as of titanium nickelide alloys produced by dual-arc smelting.

 

The Metal Processing section includes a selection of three articles that look at the effet of the forming process parameters on the structure and properties of non-ferrous metals and alloys, as well as the process of gas dynamic cold spraying of the Al-Al2O3 powder mixture on aluminium substrates with various roughnesses.

 

Please find more details below, or order your printed or electronic version of the Journal.


BENEFICATION
Название Control over crushing and screening with the help of visiometric analysis of ore
Авторы Morozov V. V., Khurelchuluun Ishgen, Delgerbat Lodoy
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:

V. V. Morozov, Professor at the Department of Organic and Inorganic Chemistry, Doctor of Technical Sciences, e-mail: dchmggu@mail.ru

 

Erdenet Mining Corporation, Erdenet, Mongolia:
Khurelchuluun Ishgen, Lead Specialist in Automatic Process Control Systems at the Engineering Department, Candidate of Technical Sciences, e-mail: khurelchulun@erdenetmc.mn
Delgerbat Lodoy, Adviser, Doctor of Technical Sciences, e-mail: delgerbat@erdenetmc.mn

HEAVY NON-FERROUS METALS
Название Oxidation kinetics and behaviour of Pb – Zn alloy anodes
Авторы Navruzov Kh. P., Ganiev I. N., Khayrullo A., Eshov B. B.
Информация об авторах

V. I. Nikitin Institute of Chemistry, Academy of Sciences of the Republic of Tajikistan, Dushanbe, Republic of Tajikistan:

Kh. P. Navruzov, Master’s Student
I. N. Ganiev, Professor, NANT Academician, Head of the Laboratory, Doctor of Technical Sciences, e-mail: ganiev48@mail.ru


Tajik Technical University named after M.S. Osimi, Dushanbe, Republic of Tajikistan:
Kh. Amonullo, Senior Lecturer at the Department of Materials Science, Metallurgical Machines and Equipment, Сandidate of Technical Sciences


Research Center for Innovative Technology, Academy of Sciences of the Republic of Tajikistan, Dushanbe, Republic of Tajikistan:
B. B. Eshov, Director, Associate Professor, Doctor of Technical Sciences, e-mail: ishov1967@mail.ru

Название Production of metallic nickel particles of a given size from nickel (II) salts using sodium borohydride
Авторы Magzhanov R. Kh., Yarovaya O. V., Bondareva G. M.
Информация об авторах

D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia:

R. Kh. Magzhanov, Postgraduate Student at the Department of Colloid Chemistry, e-mail: ruh7899@gmail.com
O. V. Yarovaya, Associate Professor at the Department of Colloid Chemistry, Сandidate of Technical Sciences
G. M. Bondareva, Associate Professor at the Department of Physical Chemistry, Сandidate of Technical Sciences

NOBLE METALS AND ALLOYS
Название Non-cyanide reagents for gold extraction from the products of pressure oxidation of sulphide concentrates
Авторы Epiforov A. V., Balikov S. V., Shipnigov A. A., Lukianov A. A.
Информация об авторах

Irgiredmet JSC (Irkutsk Research & Development Center for Precious and Rare Metals and Diamonds), Irkutsk, Russia:

A. V. Epiforov, Senior Researcher, Сandidate of Technical Sciences, e-mail: epiforov@irgiredmet.ru
S. V. Balikov, Principal Researcher, Doctor of Technical Sciences, e-mail: balikov@irgiredmet.ru

A. A. Lukianov, Senior Researcher, Postgraduate Student, e-mail: laa@irgiredmet.ru

 

Irgiredmet JSC (Irkutsk Research & Development Center for Precious and Rare Metals and Diamonds), Irkutsk, Russia1 ; Irkutsk National Research Technical University (INRTU), Irkutsk, Russia2:
A. A. Shipnigov, Engineer1, Master’s Student2, e-mail: shipn.anton@yandex.ru

LIGHT METALS AND CARBON MATERIALS
Название Effect of alloying, modifying and fluxing agents on aluminum hydrogen saturation
Авторы Baranov V. N., Kulikov B. P., Partyko E. G., Kosovich A. A.
Информация об авторах

Siberian Federal University, Krasnoyarsk, Russia:

V. N. Baranov, Director of Institute of Non-Ferrous Metals and Material Science, Candidate of Technical Sciences, e-mail: vnbar79@mail.ru
B. P. Kulikov, Leading researcher, Doctor of Chemistry Sciences, e-mail: kulikov-boris@yandex.ru
E. G. Partyko, Junior Researcher, e-mail: elforion@mail.ru
A. A. Kosovich, Senior Lecturer, Candidate of Technical Sciences, e-mail: a-herz@mail.ru

COMPOSITES AND MULTIPURPOSE COATINGS
Название Understanding the process of installing Al + Al2O3 powder coatings by cold gas dynamic spraying on substrates with different surface roughness
Авторы Kuang Nguyen, Aleshchenko A. S., Guseynov E. R.
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:

Nguyen Kuang, Postgraduate Student at the Department of Metal Forming, e-mail: nquang.misis@mail.ru
A. S. Aleshchenko, Head of the Department of Metal Forming, Associate Professor, Candidate of Technical Sciences, e-mail: judger85@mail.ru
E. R. Guseynov, Master’s Student at the Department of Metal Forming, e-mail: edikeduardguseinov@gmail.com

MATERIALS SCIENCE
Название The structure, segregation and microhardness of the structural components of the Al – Ni – Zr alloys synthesized from nickel oxide NiO and brazilite concentrate by means of SHS metallurgy
Авторы Ri E. H., Ri Hosen, Kim E. D., Ermakov M. A.
Информация об авторах

Pacific National University, Khabarovsk, Russia:

E. H. Ri, Head of the Department of Steel Casting and Technology of Metals, Doctor of Technical Sciences, e-mail: erikri999@mail.ru
Hosen Ri, Professor at the Department of Steel Casting and Technology of Metals, Doctor of Technical Sciences, e-mail: opirus@bk.ru
E. D. Kim, Lecturer at the Department of Steel Casting and Technology of Metals, e-mail: jenya_1992g@mail.ru
M. A. Ermakov, Associate Professor at the Department of Steel Casting and Technology of Metals, Сandidate of Technical Sciences, e-mail: ermakovma@yandex.ru

Название Formation technology and structure of titanium nickelide-based alloys in double-arc melting
Авторы Kovtunov A. I., Plakhotny D. I.
Информация об авторах

Tolyatti State University, Tolyatti, Russia:

A. I. Kovtunov, Professor of the Chair for Welding, Metal Forming, Doctor of Technical Sciences, Associate Professor, e-mail: akovtunov@rambler.ru
D. I. Plakhotny, Engineer, Senior Lecturer of the Chair for Welding, Metal Forming, e-mail: d01125@mail.ru

METAL PROCESSING
Название Experimental and theoretical studying simulation of influence of continuous extrusion technological modes on the properties formation of rectangular copper busbars
Авторы Koshmin A. N., Zinoviev A. V., Chasnikov A. Y., Grachev G. N.
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:

A. N. Koshmin, Postgraduate Student of the Department of Metal Forming, e-mail: koshmin.an@misis.ru
A. V. Zinoviev, Professor of the Department of Metal Forming, Doctor of Technical Sciences

 

“Svelen” Ltd., St. Petersburg, Russia:
A. Y. Chasnikov, Advisor to General Director, Doctor of Technical Sciences
G. N. Grachev, General Director

Название Isothermal forming of body cellular panels during upsetting-pressure welding
Авторы ChudinV. N., Platonov V. I., Romanov P. V.
Информация об авторах

FSBEI HE Russian University of Transport (MIIT), Moscow, Russia:

V. N. Chudin, Professor of the Chair for Resistance of Materials and Structural Mechanics, Doctor of Technical Sciences, e-mail: vladimir-chudin@yandex.ru

 

FSBEI HE Tula State University, Tula, Russia:
V. I. Platonov, Associate Professor of the Chair for Mechanics of Plastic Shaping, Candidate of Technical Sciences, e-mail: mpf-tula@rambler.ru
P. V. Romanov, Post-Graduate Student

Название Study of features of texture and structure evolution during hot rolling in a continuous group of stands of aluminum alloy 6016
Авторы Aryshensky E. V., Aryshensky V. Yu., Kaurova E. S., Tribunsky A. V.
Информация об авторах

Samara University, Samara, Russia:

E. V. Aryshensky, Associate Professor, Chair for Metals Technology and Aviation Materials Science, Candidate of Technical Sciences, e-mail: ar-evgenii@yandex.ru
E. S. Kaurova, Postgraduate Student, e-mail: echitnaeva72@gmail.com
A. V. Tribunsky, Postgraduate Student

JSC Arkonik SMZ, Samara, Russia:

V. Yu. Aryshensky, Chief Distributor, Doctor of Technical Sciences

Журналы →  Tsvetnye Metally →  2021 →  №7