CIS Iron and Steel Review
D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia):
D. Yu. Zhukov, Dr. Eng., Adviser to the Rector,
Yu. M. Averina, Dr. Eng., Associate Professor, Dept. of Innovative Materials and Corrosion Protection, e-mail: averinajm@mail.ru
V. V. Menshikov, Dr. Eng., Professor, Dept. of Innovative Materials and Corrosion Protection
Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):
S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies
A. S. Kharchenko, Cand. Eng., Assocoate Prof., Head of Dept. of Metallurgy and Chemical Technologies
G. Yu. Savchenko, Post-graduate, Dept. of Metallurgy and Chemical Technologies
Magnitogorsk Iron and Steel Works PJSC (MMK) (Magnitogorsk, Russia):
V. A. Beginyuk, Head Specialist of the Technological Group, Blast Furnace Shop
JSC «RPA «CNIITMASH» (Moscow, Russia):
L. Ya. Levkov, Dr. Eng., Head of the Special Electrometallurgy Laboratory, e-mail: LYaLevkov@cniitmash.com, 6758745@mail.ru
Lomonosov Moscow State University (Moscow, Russia):
D. А. Pankratov, Cand. Chem., Leading Scientific Researcher, Chemical Dept., e-mail: pankratov@radio.chem.msu.ru
Nosov Magnitogorsk state technical university (Magnitogorsk, Russia):
M. I. Rumyantsev, Cand. Eng., Prof., Dept. of Material Processing, e-mail: mikhail.rumyantsev54@bk.ru
O. N. Tulupov, Dr. Eng., Prof., Vice Rector for Research and Innovation, e-mail: o.tulupov@mail.ru
Bauman State Technical University (Moscow, Russia):
V. A. Demin, Dr. Eng., Prof., e-mail: va_demin@bk.ru
A. A. Rizkova, Post-graduate, Mechanical Engineer, MT6 Department
Tula State University (Tula, Russia):
S. N. Larin, Dr. Eng., Prof., Deputy Director on Research and Development, Polytechnic Institute, e-mail: mpf-tula@rambler.ru
3 Technical University of Munich (Munich, Germany):
R. V. Riskin, Master student
“Krasnoyarskgrafit” JSC (Krasnoyarsk, Russia):
V. N. Amelchenko, General Director, e-mail: krsgrafit@yandex.ru
Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru
“Siberian Federal University (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
V. A. Borisyuk, Post-Graduate, e-mail: kiro.30stm@mail.ru
Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):
A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
A. I. Zhitenev, Engineer
Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing, e-mail: m.polyakova@magtu.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Material Processing, e-mail: yu.efimova@magtu.ru
Indian Institute of Technology Bombay (Mumbai, India):
K. Narasimhan, Dr. Eng. Department of Metallurgical Engineering and Materials Science, e-mail: nara@iitb.ac.in
M. J. N. V. Prasad, Dr. Eng. Department of Metallurgical Engineering and Materials Science
Volgograd State Technical University (Volgograd, Russia):
S. B. Gamanyuk, Cand. Eng., Associate Professor, e-mail: gamanuk@mail.ru
N. A. Zyuban, Dr. Eng., Professor, Head of the Chair “Technology of Materials”, e-mail: tecmat@vstu.ru
D. V. Rutskii, Cand. Eng., Associate Professor, e-mail: tecmat@vstu.ru
G. V. Babin, Post-Graduate
Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):
A. A. Kazakov, Dr. Eng., Prof., e-mail: kazakov@thixomet.ru
E. I. Kazakova, Leading Engineer
A. A. Kur, Cand. Eng.
Kazakh British Technical University, «KBTU METALLUM» LLP (Almaty, Kazakhstan):
V. G. Mironov, Cand. Eng., Head of the Project “TOO KBTU SPLAV”,
G. T. Shilov, Senior Researcher, Mechanical Engineer
A. A. Bekisheva, Doctoral Candidate, e-mail: ardabekovna@mail.ru
JSC «Institute of Metallurgy and Ore Beneficiation» (Almaty, Kazakhstan):
Zh. B. Ilmaliyev, Head of the Staff
I. K. Beysembetov (Satbayev University, Kazakhstan) and B. K. Kenzhaliev (Institute of Metallurgy and Ore Beneficiation) were also the participants in this work.
National University of Science and Technology “MISiS” (Moscow, Russia):
Ph. V. Kiryukhantsev-Korneev, Cand. Eng., Associate Prof., Department of Powder Metallurgy and Functional Coatings; Leading Researcher, Scientific and Educational Center SHS MISiS-ISMAN, e-mail: kiruhancev-korneev@yandex.ru
A. D. Sytchenko, Laboratory Assistant, Scientific and Educational Center SHS MISiS-ISMAN
A. E. Kudryashov, Cand. Eng., Leading Researcher, Scientific and Training Center SHS MISiS-ISMAN
E. A. Levashov, Dr. Eng., Prof., Head of the Department of Powder Metallurgy and Functional Coatings; Director, Scientific and Educational Center SHS MISiS-ISMAN
Chuvash State University (Cheboksary, Russia):
I. E. Illarionov, Dr. Eng., Prof., Head of the Chair “Material Science and Metallurgical Processes”, e-mail: tmilp@rambler.ru
Siberian Federal University (Krasnoyarsk, Russia):
T. R. Gilmanshina, Cand. Eng., Associate Professor, e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Professor
N. A. Bratukhina, Associate Professor
Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
I. Yu. Mezin, Dr. Eng., Prof., Head the Chair of Automobile Technology, Certification and Service
I. A. Mikhailovsky, Dr. Eng., Prof., the Chair of Automobile Technology, Certification and Service
“BelMag” Scientific and Production Corporation (Magnitogorsk, Russia):
D. A. Pesterev, Leading Product Design Engineer, Design Engineering Dept., e-mail: pesterev@belmag.ru
Ural Federal University (Ekaterinburg, Russia):
M. V. Erpalov, Cand. Eng., Assocoate Prof., Chair “Metal Forming”, e-mail: m.v.erpalov@urfu.ru
D. A. Pavlov, Cand. Eng., Associate Prof., Chair “Metal Forming”, e-mail: d.a.pavlov@urfu.ru