Tsvetnye Metally

The 12-th issue of the journal «Tsvetnye Metally» (Non-ferrous metals) (December 2016) shares the traditional items.

The “Heavy non-ferrous metals” item includes the article written by the “Magnezit” group employees. They investigated the factors of wear of zinc Waelz-furnaces lining and showed the results of the works, aimed on its durability increasing. A main attention is paid to the technology of production of chromite-periclase refractories.

The article “Electrochlorinator for dissolution of placer platinum” (item “Noble metals and their alloys”) studies the influence of main parameters on electrochlorinator operation, intended for raw material processing, containing the platinum group metals. Such industrial electrochlorinator should be used for dissolution of other types of raw materials, containing noble metals (for example, gold placer and automotive catalyst processing products).

The item “Rare metals, semiconductors” includes two articles, devoted to the growing of Ca-Zn-Te monocrystals and epitaxial layers Ca-Hg-Te.

The article “Optimization of heat treatment modes of experimental aluminum antifriction alloys” considers the influence of natural ageing and thermal treatment on hardness and impact elasticity of eight experimental antifriction alloys Al – Sn – Pb – Cu – Si – Zn – Mg – Ti.

You may find below more details about the issue or book printed or electronic version of the journal.

BENEFICATION
Название	Enrichment indicators for materials with a predominance of fine-graded gold before and after thermal processing on the example of carbonate-silicate ore
Авторы	Amdur A. M., Tsypin E. F., Matushkina A. N.
Информация об авторах	Ural State Mining University, Ekaterinburg, Russia: A. N. Matushkina, Post-Graduate Student, e-mail: annamat87@mail.ru A. M. Amdur, Head of a Chemistry Chair, e-mail: engineer-ektb@rambler.ru E. F. Tsypin, Professor, e-mail: Tsipin.E@mail.ru
HEAVY NON-FERROUS METALS
Название	Research on wear of chromite-periclase refractories in a reaction zone of zinc waelz-kiln
Авторы	Akselrod L. M., Yarushina T. V., Maryasev I. G., Nechunaev V. L.
Информация об авторах	LLC “Magnezit Group”, Moscow, Russia: L. M. Akselrod, Technical Director LLC “Magnezit Group”, Satka, Chelyabinsk region, Russia: T. V. Yarushina, Head of Administrative Department of Technological Developments I. G. Maryasev, Head of Laboratory of Materials Science (Department of Technological Developments) LLP “Dalmond”, Pavlodar, Kazakhstan: V. L. Nechunaev, Executive Officer of the Representation in the Republic of Kazakhstan
NOBLE METALS AND ALLOYS
Название	Electrochlorinator for dissolution of placer platinum
Авторы	Konik K. P., Kuzas E. A., Lobko S. V., Naboychenko S. S.
Информация об авторах	Ekaterinburg Non-Ferrous Metals Processing Plant, Verkhnyaya Pyshma, Russia: K. P. Konik, Head of Refining Shop S. V. Lobko, Leading Research Engineer LLC “ENFMPP — Engineering”, Verkhnyaya Pyshma, Russia: E. A. Kuzas, Engineer, e-mail: e.kuzas@ezocm.ru Ural Federal University named after the first President of Russia B. N. Yetlsin, Ekaterinburg, Russia: S. S. Naboychenko, Professor, Head of a Chair of Metallurgy of Heavy Nonferrous Metals
Название	Developing a mathematical model of dynamics of high-temperature gold desorption from active coals on the basis of physiochemical conceptions about the process
Авторы	Elshin V. V., Mironov A. P., Ovsyukov A. E.
Информация об авторах	Irkutsk National Research Technical University, Irkutsk, Russia: V. V. Elshin, Head of a Chair of Automation of Industrial Processes A. P. Mironov, Assistant Professor of a Chair of General Education A. E. Ovsyukov, Deanery Programmer, e-mail: a-ovsyukov@rambler.ru
LIGHT METALS AND CARBON MATERIALS
Название	Impact of alumina partial density on the process conditions of aluminium reduction from cryolite-alumina slurry parameters
Авторы	Yasinskiy A. S., Vlasov A. A., Polyakov P. V., Solopov I. V.
Информация об авторах	Siberian Federal University, Krasnoyarsk, Russia: A. S. Yasinskiy, Post-Graduate Student, e-mail: ayasinskiykrsk@gmail.com A. A. Vlasov, Assistant Professor of a Chair of Engineering Bachelor's Program CDIO P. V. Polyakov, Professor-Consultant of a Chair of Metallurgy of Non-Ferrous Metals I. V. Solopov, Post-Graduate Student
Название	Usage of flexible graphite foil for the protection of collector ars of aluminium electrolysers
Авторы	Yushkova O. V., Polyakov P. V., Arkhipov G. V., Ivanova A. M
Информация об авторах	Institute of Non-ferrous Metals and Materials Science, Siberian Federal University, Krasnoyarsk, Russia: O. V. Yushkova, Leading Engineer of a Chair of Metal Science and Thermal Treatment named after V. S. Biront, e-mail: olga_yuskova_1954@mail.ru P. V. Polyakov, Professor-Consultant LLC “Engineering-Technological Center “RUSAL”, Krasnoyarsk, Russia. G. V. Arkhipov, Director of a Project “Energy-saving constructions of electrolysers” LLC “Scientific and Technical Center “Elter”, Krasnoyarsk, Russia: A. M. Ivanova, Director of LLC “Scientific and Technical Center “Elter”
RARE METALS, SEMICONDUCTORS
Название	Sorption extraction of rare-earth metals during the phosphogypsum processing
Авторы	Saykina O. Yu., Yurasova O. V., Vasilenko S. A.
Информация об авторах	JSC “Giredmet”, Moscow, Russia: O. Yu. Saykina, Industrial Engineer, e-mail: saykina.ol@gmail.com O. V. Yurasova, Head of Laboratory, e-mail: OVYurasova@giredmet.ru S. A. Vasilenko, Leading Industrial Engineer
Название	Growing of monocrystals Cd_1–xZn_xTe (х ~ 0,04) by vertical Bridgman crystallization oriented on seeding
Авторы	Grishechkin M. B., Denisov I. A., Silina A. A., Shmatov N. I.
Информация об авторах	JSC “Giredmet”, Moscow, Russia: M. B. Grishechkin, Researcher I. A. Denisov, Head of Laboratory, e-mail: IADenisov@rosatom.ru A. A. Silina, Researcher N. I. Shmatov, Leading Researcher
Название	Investigation of influence of the conditions of growing from tellurium-based solution on morphology of epitaxial alloy (cadmium-mercury-tellurium) surface
Авторы	Andrusov Yu. B., Belov A. G., Konovalov A. A., Smirnova N. A.
Информация об авторах	JSC “Giredmet”, Moscow, Russia: Yu. B. Andrusov, Senior Researcher, e-mail: andrusovyuri@gmail.com A. G. Belov, Leading Researcher A. A. Konovalov, Senior Researcher N. A. Smirnova, Leading Researcher
COMPOSITES AND MULTIPURPOSE COATINGS
Название	Obtaining of polygonal powder of titanium and its alloys with given granulometric composition for additive technologies
Авторы	Yuzhakova E. A., Kotlyarov V. I., Beshkarev V. T., Ivanov V. V.
Информация об авторах	JSC “Giredmet”, Moscow, Russia: E. A. Yuzhakova, Junior Researcher of the Laboratory of Technology of Obtaining of Rare, Refractory and High-Pure Metals, e-mail: ElAYuzhakova@giredmet.ru V. I. Kotlyarov, Head of the Laboratory of Technology of Obtaining of Rare, Refractory and High-Pure Metals, e-mail: VIKotlyarov@giredmet.ru V. T. Beshkarev, Leading Researcher of the Laboratory of Technology of Obtaining of Rare, Refractory and High-Pure Metals V. V. Ivanov, Senior Researcher of the Laboratory of Technology of Obtaining of Rare, Refractory and High-Pure Metals
Название	Investigation of mechanical properties of nickel alloy products, obtained using various technological parameters of selective laser melting on 3D prototyping unit
Авторы	Beregovskiy V. V., Tretyakov E. V., Shchurenkova S. A., Plesovskikh A. V.
Информация об авторах	JSC “TsNIITMASh”, Moscow, Russia: V. V. Beregovskiy, Deputy Chief Executive Officer — Director of the Institute of Technology of Surface and Nanomaterials E. V. Tretyakov, Deputy Production and Planning Director of the Institute of Technology of Surface and Nanomaterials S. A. Shchurenkova, Head of Laboratory “Vacuum Coatings and Equipment”, e-mail: svetastch@yandex.ru LLC “Ural Gas Centrifuge Plant”, Novouralsk, Russia: A. V. Plesovskikh, Chief Specialist of the Investigation Department
METAL PROCESSING
Название	3D modeling of large steel-copper billet rolling for electrolyzer cathode rods
Авторы	Dovzhenko N. N., Dovzhenko I. N., Sidelnikov S. B., Arkhipov G. V.
Информация об авторах	Siberian Federal University, Krasnoyarsk, Russia: N. N. Dovzhenko, Professor of a Chair of Plastic Metal Working I. N. Dovzhenko, Assistant Professor of a Chair of Plastic Metal Working S. B. Sidelnikov, Professor, Head of a Chair of Plastic Metal Working, e-mail: sbs270359@yandex.ru Engineering-Technological Center “RUSAL”, Krasnoyarsk, Russia: G. V. Arkhipov, Director of a Project
Название	Structure, mechanical properties аnd deformation ability of ingots and flat products of the alloy Al - 6 % Cu - 2 % B
Авторы	Samoshina M. E., Chervyakova K. Yu., Aleshchenko A. S., Mirzomustakimov M. M.
Информация об авторах	National University of Science and Technology “MISiS”, Moscow, Russia: M. E. Samoshina, Senior Researcher of the Engineering Center “Casting Technologies and Materials”, Assistant Professorr of a Chair “Casting Technologies and Art Material Working”, e-mail: samoshina@list.ru K. Yu. Chervyakova, Engineer of the Engineering Center “Casting Technologies and Materials”, Post-Graduate Student of a Chair “Casting Technologies and Art Material Working” A. S. Aleshchenko, Assistant Professor of a Chair of Plastic Metal Working M. M. Mirzomustakimov, Master's Degree Student of a Chair “Casting Technologies and Art Material Working”
Название	Optimization of heat treatment modes of experimental aluminum antifriction alloys
Авторы	Mironov A. E., Gershman I. S., Kotova E. G., Gershman E. I.
Информация об авторах	Railway Research Institute, Moscow, Russia: A. E. Mironov, Leading Specialist I. S. Gershman, Chief Specialist, e-mail: isgershman@gmail.com E. G. Kotova, Post-Graduate Student E. I. Gershman, Researcher of Laboratory of Non-Ferrous Metals and Tribology

Журналы → Tsvetnye Metally → 2016 → №12

Журналы

CIS Iron and Steel Review

Горный мир музеев