Журналы →  Non-ferrous Мetals →  2012 →  №1 →  Назад

METAL PROCESSING
Название To the possibility of safe operation of titanium alloys in oxygen-containing environment during the pressure leaching of sulfide minerals
Автор Bolobov V. I., Shneerson Ya. M., Lapin A. Yu.
Информация об авторе

Department of Mining Machines and Machine-Building Technology, Saint-Petersburg State Mining University

V. I. Bolobov, Professor

 

Science and Technology Centre “Gidrometallurgiya” Ltd

Ya. M. Shneerson, General Director
A. Yu. Lapin, Technical Director

Реферат

The state of the problem referring to the application of titanium alloys as construction materials for autoclaves operating with oxygen gas has been considered. The instructions on safe operation of titanium alloys in nonferrous autoclave processes, as well as scientific background for setting the limit values of oxygen partial pressures, Рs.o in vapor-gas mixtures precluding ignition of autoclave titanium elements even at failure have been analyzed. It has been concluded that the set values of Рs.o are correct only for the autoclaves with no moving parts, as for those fitted with moving elements (agitators) along with the accidental structural failure there exists a risk of another emergency situation when friction work Аf contributes to the juvenile surface temperature Т*. Under such conditions, the potential ignition of materials will be determined by the temperature Т** to which the surfaces of elements under friction get heated. The latter (Т**) may considerably exceed the temperature reached only due to fracture energy of a construction (Т*). The conclusion has been drawn that eliminating a possibility of titanium alloy ignition in the oxygen environment of autoclaves equipped with agitating units can be provided by the development of technical measures preventing heating the potential friction points of titanium constructions up to the alloy ignition temperature Т* at given partial pressures of reactant gases.

Ключевые слова Titanium alloys, oxygen gas, safe operation in autoclave processes, heating by friction
Библиографический список

1. Naboychenko S. S., Ni L. P., Shneerson Ya. M., Chugaev L. V. Avtoklavnaya gidrometallurgiya tsvetnykh metallov (Pressure Hydrometallurgy of Non-ferrous Metals). Ed. S. S. Naboychenko. Ekaterinburg, 2002. 940 p.
2. Korroziya konstruktsionnykh materialov. Gazy i neorganicheskie kisloty. Kn. 1. (Corrosion of Structural Materials. Gases and Inorganic Acids. Book 1). Ed. V. V. Batrakov. Moscow, 2000. 345 p.
3. Littman F. E., Church F. M., Kinderman E. M. J. Less-Common Metals. 1961. Vol. 3. pp. 367–378.
4. Littman F. E., Church F. M., Kinderman E. M. J. Less-Common Metals. 1961. Vol. 3. pp. 378–397.
5. Barth T. R., Hair A. T. C., Meier T. P. The Operation of the HBM&S Zinc Pressure Leach Plant. Zinc and Lead Processing. Flin Flon : The Metallurgical Society of CIM, 1998.
6. Bolobov V. I., Podlevskikh N. A. Fizika goreniya i vzryva — Physics of combustion and explosion. 2007. Vol. 43, No. 4. pp. 39–48.
7. Tipovaya instruktsiya. Avtoklavy. Obshchie trebovaniya bezopasnosti. TI R-001-96 (Standard manual. Autoclaves. General requirements for safety. TI R-001-96). Moscow, 1996.
8. Bolobov V. I. Tsvetnye Metally — Non-ferrous Metals. 2011. No. 10. pp. 94–97.
9. Borisova E. A., Bardanov K. V. Izvestiya vuzov. Tsvetnaya metallurgiya — Proceedings of Higher Schools. Non-ferrous Metallurgy. 1963. No. 2. pp. 47–48.
10. Borisova E. A., Bardanov K. V. Metallovedenie i termicheskaya obrabotka metallov — Metal Science and Heat Treatment of Metals. 1963, No. 2. pp. 37–40.

Language of full-text английский
Полный текст статьи Получить
Назад