Журналы →  Obogashchenie Rud →  2012 →  №2 →  Назад

BENEFICIATION PROCESSES
Название Fine-dispersed oxidized pulps thickening and filtration processes study
Автор Sizyakov V. M., Ivanik S. A., Fokina S. B.
Информация об авторе

St. Petersburg State Mining University (Russia):

Sizyakov V. M., Head of Chair, kafmetall@mail.ru

Ivanik S. A., Postgraduate, selena_4ka@inbox.ru

Fokina S. B., Postgraduate, fokina_sb@mail.ru

Реферат

The purpose of oxidative pressure leaching is liberation of sulfide minerals associated with fine-dispersed gold. One of the conditions for achieving high gold recovery from such ores is superfine grinding of feed material. As is known, solid phase dispersion is one of the factors determining throughput rate and indices of pulp dewatering processes in subsequent operations. The indices of thickening of pulps, produced in autoclave treatment of metallurgical raw material, are determined by a number of factors. The present work describes the results of studies on pulps dewatering following oxidative pressure leaching of finely ground sulfide gold-containing concentrates. The main reasons for oxidized pulps sedimentation indices worsening in finely-ground raw materials treatment are determined. Superfine pulps dewatering intensification methods are proposed. Flocculant consumption effect on fine-dispersed oxidized pulps thickening process is considered. Pulp liquid phase saline content effect on dewatering processes is estimated. Thickened product L:S ratio effect on specific throughput in such pulps filtration is shown. Pulps dewatering process regimes are determined with respect to finelyground sulfide concentrates processing, providing for acceptable indices.

Ключевые слова Gold-containing sulfides, difficult ores, superfine grinding, oxidation, thickening, sedimentation, flocculant, particle size, salt-saturated solution, filtration
Библиографический список

1. Shneerson Ya. M., Naboychenko S. S. Tsvetnye Metally — Non-Ferrous Metals, 2011, No. 3, pp. 15–20.

2. Kloiber O., Johnson G., Palmer C., Swarts A., Brits J. Tati hydrometallurgical demonstration plant project. Proc. 10th Nickel/Cobalt Conf. ALTA 2005, Perth, Australia, 2005, May 16–18. Melbourne, ALTA Metallurgical Services, 2005.

3. Pat. 5232491 USA.

4. Naboychenko S. S., Shneerson Ya. M., Kalashnikova M. I., Chugaev L. V. Avtoklavnaya gidrometallurgiya tsvetnykh metallov (Pressure hydrometallurgy of non-ferrous metals). Vol. 2. Yekaterinburg, Ural State Technical University, 2009, pp. 351–363.

5. Nebera V. P. Flokulyatsiya mineralnykh suspenziy (Flocculation of mineral suspensions). Moscow, Nedra, 1983, 288 p.

6. Veytser Yu. I., Mints D. M. Vysokomolekulyarnye flokulyanty v protsessakh ochistki prirodnykh i stochnykh vod (High molecular weight flocculants in natural and waste water treatment). 2nd ed., Moscow, Stroyizdat, 1984, 202 p.

7. Chuyanov G. G. Obezvozhivaniye, pyleulavlivaniye i okhrana okruzhayushchey sredy. Uchebnik dlya vuzov (Dewatering, dust collecting and environment protection. Textbook for high schools), Moscow, Nedra, 1983, pp. 275–278.

8. Spravochnik po obogashcheniyu rud. Spetsialnye i vspomogatellnye processy (Reference book on mineral processing. Special and supporting processes). 2nd ed., Moscow, Nedra, 1983, pp. 275–278.

Language of full-text русский
Полный текст статьи Получить
Назад