Journals →  Tsvetnye Metally →  2011 →  #7 →  Back

Aluminium, alumina, carbon materials
ArticleName Modernization of electrolysis production with Soderberg anodes
ArticleAuthor Begunov A. I., Begunov A. A.
ArticleAuthorData A. I. Begunov, Head of Chemistry Department, Professor; A. A. Begunov, Candidate for a Doctor's Degree, Department of Industrial Enterprises Management, e-mail: begunov75@inbox.ru, State Educational Institution of Higher Professional Education, Irkutsk State Technical Universary, Ministry of Education and Science of the Russian Federation.
Abstract

Mass transfer on metal-electrolyte phase boundary using physical model of two-dimensional vertical section of electrolyzers in a scale as 1:1 has been researched. It has been shown that metal losses has been defined with emulsification and emission in electrolyte of dispersive metal drops from crest of coincident wave, formed at the surface of liquid-metal phase close to anode border. It has been shown that electrolyzers with Soderberg anodes will have current output of metal more than 95–96 %, if they are transferred during conservation of the type of current lead on anodes with width, approached to baked anodes. The constructions of double-anode electrolyzers for side feed through and triple-anode for top feed through during suspending two or three anode blocks of common frame have been proposed. Expenses on reconstruction with conservation type of current feed through reduce, comparing with transition this electrolyzers on baked anodes by 4–5 times.

keywords Electrolyzers modernization, aluminium, Soderberg anodes, anode width, current output, metal concentration, energy consumption.
References

1. Begunov A. I. III International Soderberg Club. Krasnoyarsk-Russia. 2005.

2. Grjotheim K., Zhuxian Q. Molten Salt Technology. Vol. II. Shenyang, 1991. 435 p.

3. Begunov A. I. Problemy modernizatsii alyuminievykh elektrolizerov (Problems of aluminium electrolyzers modernization). Irkutsk, 2000. 105 p.

4. Primary Aluminium Smelters of the World. Aluminium Times. 2000. pp. 13–15.

5. Driscol K. J., Saraf S., Martin J. P. Light Metals. 1998. pp. 1273–1277.

6. Begunov A. I., Gromov B. S. Ibid. 1994. pp. 295–304.

7. Begunov A. I., Tsymbalov S. D. Makrokinetika poter metalla v alyuminievykh elektrolizerakh (Macrokinetics of metal losses in aluminium electrolyzers) St. Petersburg : Nauka, 1994. 77 p.

8. Patent 2186881 RF, MPK7 C 25 C 3/12, C1. Elektrolizery dlya polucheniya alyuminiya s bokovym podvodom toka k anodam (Electrolyzers for aluminium obtaining with current side feed to anode). Begunov A. I. ; Publ. 10.08.2002.

9. Patent 2187581 RF, MPK7 C 25 C 3/06, C2. Elektrolizery dlya polucheniya alyuminiya (Electrolyzers for aluminium obtaining). Begunov A. I. ; Publ. 20.08.2002.

10. Pat. 2188257 RF, MPK7 C 25 C 3/12, C2. Elektrolizery dlya polucheniya alyuminiya (Electrolyzers for aluminium obtaining). Begunov A. I. ; Publ. 27.08.2002.

11. Korobov M. A., Dmitriev A. A. Samoobzhigayushchiesya anody alyuminievykh elektrolizerov (Self-baking anodes for aluminium electrolyzers). Moscow : Metallurgiya, 1972. 207 p.

12. Vetyukov M. M., Tsyplakov A. M., Shkolnikov S. N. Elektrometallurgiya alyuminiya i magniya (Electrometallurgy of aluminium and magnesium). Moscow : Metallurgiya, 1987. 319 p.

13. Huglen R., Kvande H. Light Metals. 1994. pp. 373–380.

14. Haupin W. Ibid. 1998. pp. 531–537.

15. Kvande H., Chen J.,Haupin W. Ibid. 1994. pp. 429–440.

16. Begunov A. I. Place on deposit in VINITI, No. 963-84.

17. Leber B., Tabereaux A., Marks J. et al. Light Metals. 1998. pp. 277–285.

18. Pat. 2200213 RF, MPK7 C 25 C 3/16, C 25 C 3/12, C2. Tokopodvod k samoobzhigayushchemusya anodu alyuminievogo elektrolizera (Current feed of self-baking anode of aluminium electrolyzer). Begunov A. I., Begunov A. A., Ivanov S. D. ; Publ. 10.03.2003.

19. Begunov A. I. Trudy mezhdunar. konf. MISiS. (Works of International Conference in National University of Science and Technology «MISIS» ). Moscow, 2006. pp. 235–250.

20. Begunov A. I. XVIII Mendeleevskiy sezd po obshchey i prikladnoy khimii. T. 2. Khimiya materialov, nanostruktury i nanotekhnologii (XVIII Mendeleev Conference of General and Applied Chemistry. Chemistry of materials, nanostructures and nanotechnologies). Moscow, 2007. 660 p.

21. Begunov A. I. Izv. vuzov. Tsvetnaya metallurgiya - News of Higher Schools. Nonferrous metallurgy tansaction. 2003. No. 4. pp. 21–25.

22. Begunov A. I. Tsvetnye metally – Non-ferrous Metals. 2004. No. 3. pp. 62–64.

Language of full-text russian
Full content Buy
Back