Journals →  Materialy Elektronnoi Tekhniki →  2011 →  #1 →  Back

MATERIALS SCIENCE AND TECHNOLOGY. SEMICONDUCTORS
ArticleName Fabrication of CdZnTe–based substrates using polyhedral methylsilsesquioxanes
ArticleAuthor P. A. Averichkin, Y. B. Andrusov, M. B. Grishechkin, I. A. Denisov, N. A. Smirnova
ArticleAuthorData P. A. Averichkin, Y. B. Andrusov, M. B. Grishechkin, I. A. Denisov, N. A. Smirnova, OAO Giredmet
Abstract
The influence of chemical−mechanical polishing (CMP) conditions on the height and homogeneity of microroughness over CdZnTe plate substrate area has been investigated. Two−step CMP modes have been developed to provide the values of surface roughness parameter (Rms) of between 2 and 8 nanometers. The addition of polyhedral methylsilsesquioxanes in the preliminary etching composition and the use of bromine−hydrobromic acid−glycerine etching at the final CMP stage provide for a homogeneous distribution of the Rms parameter values along the surface of 45 mm diameter substrates.
keywords Cadmium−zinc telluride, substrate, chemical−mechanical polishing, methylsilsesquioxane.
References
1. SHmatov, N. I. Tverdye rastvory Cd1-yZnyTe - material dlya podlozhek epitaksial'nykh struktur CdxHg1-xTe / N. I. SHmatov, N. A. Smirnova, A. G. Belov, V. A. Oranskiy, A. A. SHlenskiy // Izv. vuzov. Materialy elektron. tekhniki. - 2006. - № 3. - S. 28—32.
2. Moravec, P. Chemical polishing of CdTeZn substrates fabricated from crystals grown by the vertical gradient freezing method / P. Moravec, P. Höschl, J. Franc, E. Belas, R. Fesh, R. Grill, P. Horodyský, P. Praus // J. Electron. Mater. - 2006. - V. 35, N 6. - P. 1206—1213.
3. Yoon, H. Investigation of the effects of polishing and etching on the quality of Cd1-xZnxTe using spatial mapping techniques / H. Yoon, J. M. Van Scyoc, R. B. James // Ibid. - 1997. - V. 26, N 6. - P. 529—533.
4. Tomashik, Z. F. Chemical-mechanical polishing of CdTe and ZnxCd1-xTe single crystals by H2O2(HNO3)-HBr-organic solvent etchant compositions / Z. F. Tomashik, V. M. Tomashik, I. B. Stratiychuk, G. M. Okrepka, I. I. Hnativ, P. Moravec, P. Höschl, J. Bok // Ibid. - 2009. - V. 38, N 8. - P. 1637—1644.
5. Moravec, P. Chemical interaction of CdTe and CdZnTe with aqueous solutions of H2O2-HI-tartaric acid / P. Moravec, V. G. Ivanits’ka, J. Franc, Z. F. Tomashik, V. M. Tomashik, K. Mašek, P. I. Feychuk, L. P. Shcherbak, P. Höschl, R. Grill, J. Walter// Ibid. - 2009. - V. 38, N 8. - P. 1645—1651.
6. Ivanits’ka, V. G. Chemical etching of CdTe in Aqueous solutions of H2O2-HI-citric acid / V. G. Ivanits’ka, P. Moravec, J. Franc, Z. F. Tomashik, , V. M. Tomashik, P. I. Feychuk, L. P. Shcherbak, K. Mašek, P. Höschl// Ibid. - 2007. - V. 36, N 8. - P. 1021—1024.
7. Averichkin, P. A. Kremniyorganicheskie nanosorbenty poliedricheskoy struktury / P. A. Averichkin, L. N. Gerchikov, B. N. Levonovich, YU. N. Parkhomenko, A. A. SHlenskiy // Tez. dokl. na 11 Mezhdunar. seminare-yarmarke «Rossiyskie tekhnologii dlya industrii». - Sankt-Peterburg, 2007. - S. 46.
8. Artemov, A. S. Nanoalmazy dlya polirovaniya / A. S. Artemov // Fizika tverdogo tela. - 2004. - T. 46, vyp. 4. - S. 670—678.
9. Artemov, A. S. KHimiko-mekhanicheskoe polirovanie - universal'naya tekhnologiya polucheniya sovershennoy poverkhnosti kristallov / A. S. Artemov // Tez. dokl. na XI Natsional'noy konf. po rostu kristallov. - M. : IK RAN, 2004. - S. 340.
Language of full-text russian
Full content Buy
Back