Journals →  Gornyi Zhurnal →  2020 →  #11 →  Back

MINING MACHINES: DESIGN VARIABLES, AUTOMATION
ArticleName Influence of operating conditions of milled peat jet transport on relative sliding of air and solid phases
DOI 10.17580/gzh.2020.11.08
ArticleAuthor Petrenko S. M., Berezovsky N. I.
ArticleAuthorData

Belarusian National Technical University, Minsk, Belarus:

S. M. Petrenko, Senior Lecturer, petrenrko.s@bntu.by
N. I. Berezovsky, Head of Chair of Mining Machines, Professor, Doctor of Engineering Sciences

Abstract

Air-and-peat mixture in horizontal jet transport pipeline is considered as a compressible two-component mixture with uniform distribution of solid peat particles in continuous air phase. Such heterogeneous medium flow is substituted for a flow of interpenetrating air phase and a quasi-solid phase approximating the flow of discrete particles. Such approach makes it possible to write individual equations of continuity and motion for each phase, but it is required to introduce the forces of aerodynamic interference at the phase boundaries in the motion equations. From the analysis of the known theoretical and experimental research data on jet transport of granular materials, it is possible to identify some parameters such that variation of any of these parameters changes the jet transport energy consumption. Such parameters are: jet capacity per mass of air and solid, Qair and Qs (kg/s) or input-output characteristic of mass concentration, μ = Qs/Qair; reduced velocities of air, Vair, solid particles, Vs, and soaring, Vsn, hereinafter called the flow-rate mode parameters, as well as the size and density of solid particles and the profile of the jet pipeline route. The flow-rate mode parameters are simply registered in the jet transport tests. The numerical determination procedure of the actual operating conditions of milled peat jet transport is justified. The known experimental data on jet transport of milled and treated peat are processed. It is found that the relative sliding ratio is functionally connected with all operating conditions in horizontal jet transport. The change of any parameter or their combination induces transition to air-and-peat mixture flow with various relative sliding of air and solid phases at different energy consumption of horizontal jet transport.

keywords Milled peat, horizontal jet transport, actual operating conditions, air and solid phases, relative sliding.
References

1. Petrenko S. M. Equation of motion of two-phase medium in jet transport pipeline. Mineral Mining Technology and Mechanization : International Conference Proceedings. Minsk, 2009. Vol. 1. pp. 106–109.
2. Petrenko S. M. Formation of air mixture flow conditions in jet transport of granular materials. Peat Production Technology and Machines : Republican Interdepartmental Collection of Papers. Minsk : Vysheyshaya shkola, 1987. Vol. 16. pp. 73–77.
3. Bakshanskiy V. I. Jet transportation of milled peat at higher concentrations of air-and-solid mixture : Dissertation … of Candidate of Engineering Sciences. Minsk, 1978. 257 p.
4. Boger D. Pros and cons of pneumatic and mechanical conveying of bulk solid materials. Processing Magazine. 2019. May. Available at: https://www.processingmagazine.com/material-handling-dry-wet/conveyors/article/15587726/pros-and-cons-of-pneumaticand-mechanical-conveying-of-bulk-solid-materials (accessed: 15.06.2020).
5. Gerasimov A. M., Grigoryev I. V., Ustinov I. D. Measurement of slope angles for granular materials. Obogashchenie Rud. 2020. No. 4. pp. 48–52. DOI: 10.17580/or.2020.04.08
6. World Record under the Streets of Lima / PHOENIX CBS GmbH, 2020. Available at: https://www.phoenix-conveyorbelts.com/pages/press-themes/press/2007–01_worldrecordsLima_en.html (accessed: 15.06.2020).
7. Innovations. Conveyor Dynamics Inc., 2016. Available at: http://conveyor-dynamics.com/index.php/experience/innovations/ (accessed: 24.06.2020).
8. Kislov N. V. Aerodynamics of milled peat. Minsk : Nauka i tekhnika, 1987. 175 p.
9. Luschtinetz T., Zeńczak W., Łuszczyński D. The Selected Results of the Experimental Research of Solid Fuel Pneumatic Transportation to Ship’s Boiler. Management Systems in Production Engineering. 2019. Vol. 27, Iss. 3. pp. 144–148.
10. Berezovskiy N. I., Voronova N. P., Boriseyko V. V. Оptimization of design parameters of twozone direct-flow drying unit. Gornaya mekhanika i mashinostroenie. 2019. No. 3. pp. 44–49.
11. Berezovskiy N. I., Kruk Yu. S., Boriseyko V. V. Statistical analysis of granulometric composition of dust particles of rocks. Gornaya mekhanika i mashinostroenie. 2019. No. 4. pp. 18–24.
12. Voronova N. P., Berezovskiy N. I., Boriseyko V. V. Mathematical modeling of a two zone countercurrent drying unit. Mathematical Methods in Engineering : International Conference Proceedings. Saint-Petersburg : Izdatelstvo Politekhnicheskogo universiteta, 2020. Vol. 1. pp. 31–33.
13. Rogovoy A. S. Energy efficacy of pneumatic transport plants. Vestnik Vostochnoukrainskogo natsionalnogo universiteta imeni Vladimira Dalya. 2016. No. 1. pp. 189–196.
14. Gushchin O. V., Chernetskaya-Beletskaya N. B. Improvement of pneumotransport of bulks on the basis of the synergetic conception. Vestnik Vostochnoukrainskogo natsionalnogo universiteta imeni Vladimira Dalya. 2015. No. 1. pp. 12–16.

Language of full-text russian
Full content Buy
Back